Shower set comprising of a shower hose, shower handset and wall mount. The shower outlet on the wall mount incorporates an approved single check valve (however the complete assembly has not been tested to verify it provides backflow protection). The shower handset incorporates a stainless-steel strainer and integral flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

WRAS Approval Number:

1907339

Expiry date:

31/07/2024

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

AXOR on hose & handset

Installation Requirements:

R001 R040

Model:

46 520 xx0 & 46 521 xx0 AXOR Edge Porter: Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

‘Hansgrohe Novus’ range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The product also incorporates a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet connections also incorporate an approved check valve cartridge however, the complete assemblies have not been fully tested to demonstrate that they provide adequate backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0465 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1907340

Expiry date:

31/07/2024

Note:

This approval does not include a shower hose and handset.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R030

Model:

Hansgrohe Novus range 71 321 xxx & 71 324 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of wall mounted, manually blended shower valves with brass bodies (various finishes) with a ceramic cartridge headwork and single lever operating member. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2000 Valves

Section Subtitle:

Blending, manually operated.

WRAS Approval Number:

1907345

Expiry date:

31/07/2024

Note:

This approval does not include a shower hose and handset

Size:

¾” BSP (F)

Marking:

AXOR on faceplate

Installation Requirements:

R001 R010 R040

Model:

46 650 xxx & 46 651 xxx AXOR Edge. Where xx denotes the surface finish, which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies with brass bodies (various finishes). Incorporating a ceramic cartridge headworks and a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0400 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole, metal.

WRAS Approval Number:

1907349

Expiry date:

31/07/2024

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

AXOR logo on body

Installation Requirements:

R001 R006 R009 R010

Model:

46 210 xx0 AXOR Edge 46 211 xx0 AXOR Edge Where xx denotes the surface finish (which is a non-water contact part). It will always be 2 digits, which can be any combination of numbers, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1907353

Expiry date:

31/07/2024

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

AXOR logo on body

Installation Requirements:

R001 R006 R009 R010

Model:

46 020 xx0 AXOR Edge 46 021 xx0 AXOR Edge Where xx denotes the surface finish, which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company