Range of wall mounted thermostatic shower valves with brass bodies (various finishes) Incorporating ceramic disc headworks, and dome type operating members and a self cancelling diverter to the shower outlets. The temperature is controlled independently via a thermostatic cartridge and dome type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. The inlet to the overhead shower incorporates a plastic flow regulator. Inlets to the main body incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

1910323

Expiry date:

31/10/2024

Size:

¾” x ½” BSP(M) off set union.

Marking:

Hansgrohe logo on handshower and valve body.

Installation Requirements:

R001 R030

Model:

27 298 xxx Crometta Showerpipe 240 1jet 27 320 xxx Crometta Showerpipe 240 1jet Where xx denotes the surface finish (which is a non-water contact part). It will always be 2 digits, which can be any combination of numbers, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of wall and deck mounted spout outlets (brass body with various finishes), incorporating a plastic aerator (19 415 xxx model) or an aerator comprising of a plastic housing and rubber aerator outlet (all other models with the exception of the 10 426 xxx model). Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlets.

WRAS Approval Number:

2001055

Expiry date:

31/01/2025

Note:

Open outlet use only.

Size:

¾” BSP (M)

Marking:

10 426 – Axor & Hansgrohe on Spout 13 413 – Hansgrohe on Spout 31 494 – Hansgrohe on Spout Bezzel 13 414 – Hansgrohe on Spout 14 420 – Hansgrohe on Spout 19 415 – Axor, Hansgrohe & Bourellec on Spout 38 410 – Axor & Uno on Spout

Installation Requirements:

R001 R040

Model:

10 426 xxx Axor Starck Bath Spout 13 413 xxx Hansgrohe Metris Bath Spout 31 494 xxx Hansgrohe Metris Bath Spout 13 414 xxx Hansgrohe Bath Spout 14 420 xxx Hansgrohe Metropol S Bath Spout 19 415 xxx Axor Bouroullec Bath Spout 38 410 xxx Axor Uno Bath Spout Where xxx denotes finish and can be replaced with: -000 Chrome -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Deck mounted spout outlet (brass body with various finishes), incorporating a plastic aerator. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlets.

WRAS Approval Number:

2001106

Expiry date:

31/01/2025

Note:

Open outlet use only.

Size:

¾” BSP (M)

Marking:

19 417 – Axor, Hansgrohe & Bourellec on Spout

Installation Requirements:

R001 R006

Model:

19 417 xxx Axor Bouroullec Bath Spout Where xxx denotes finish and can be replaced with: -000 Chrome -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of three hole, single outlet (fixed) combination tap assemblies (having various finishes). Incorporating quarter turn ceramic disc headworks and single lever operating members. The outlet is connected via stainless steel braided PE-X lined interconnecting hoses. The spout outlet incorporates a plastic aerator. The product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole, metal, single outlet, fixed.

WRAS Approval Number:

2001334

Expiry date:

31/01/2025

Size:

½” BSP (F)

Marking:

Axor on spout

Installation Requirements:

R001 R006 R007 R010

Model:

46 050 xx0 Axor Edge 46 051 xx0 Axor Axor Edge

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (various finishes), incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a rubber aerator. Product is supplied with a lever type pop-up waste Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001090

Expiry date:

31/01/2025

Size:

Stainless steel PEX lined flexible hose with 3/8” BSP captive nut end connections

Marking:

AXOR on front of tap body

Installation Requirements:

R001 R006 R009 R010

Model:

10 015 xxx Available in customised finishes ‘xxx’ denotes the finish: - 000 Chrome - 020 PVD polished chrome - 260 PVD Brushed chrome - 830 PVD Polished nickel - 820 PVD Brushed nickel - 990 PVD Polished gold optic - 250 PVD Brushed gold optic - 300 PVD Polished red gold - 310 PVD Brushed red gold - 130 PVD Polished bronze - 140 PVD Brushed bronze - 330 PVD Polished black chrome - 340 PVD Brushed Black chrome - 930 PVD Polished brass - 950 PVD Brushed brass - 800 PVD stainless steel optic

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company