Hansgrohe SE Approvals


#260104301

Section:
2010 Shower Valves
Description:
A Range of Shower valve(s) with thermostatic temperature control
Wall mounted concealed Undefinable Air Gap – See IRN’s Incorporates a check valve cartridge (however the complete assembly has not been fully tested to demonstrate it provides backflow protection)
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R040
Expiry date:
31/01/2031

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
48 712 xx0Variousbasic set 4871018010 bar60 °CAXORon the handleYesCeramic cartridgeNot Applicable
48 722 xx0Variousbasic set 4871018010 bar60 °CAXORon the handleYesCeramic cartridgeNot Applicable
48 713 xx0Variousbasic set 4872018010 bar60 °CAXORon the handleYesCeramic cartridgeNot Applicable
48 723 xx0Variousbasic set 4872018010 bar60 °CAXORon the handleYesCeramic cartridgeNot Applicable
48 710 180NAG 1/210 bar60 °Chansgroheembossed on the bodyYesCeramic cartridge
48 720 180NAG 1/210 bar60 °Chansgroheembossed on the bodyYesCeramic cartridge

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. Product needs to be installed with the dedicated basic set.


Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#260104014

Range of single hole, single outlet, (swivel) combination tap assemblies incorporating brass bodies (various finishes) and ceramic certridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Model 74 740 xx0 is supplied with lever type pop up waste (not verified by test). Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
260104014
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
PA braided PE-RT lined flexible hose assembly with 3/8” BSP captive nut end connections.
Marking:
Hansgrohe on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2031
Model:
74 740 xx0 74 741 xx0 74 742 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#260209302

Section:
1650 Shower Outlets
Description:
A Range of Shower head(s) and/or shower handset(s).
Hand Shower.
Basis of Compliance:
Tested to a standard assessed as an appropriate British Standard by WRAS
Installation Requirements:
R001 R040
Expiry date:
28/02/2031

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
39 773 xx0VariousG 1/2open outlet bar60 °CAXORon select buttonYesNot applicableNot ApplicableNot Applicable
39 774 xx0VariousG 1/2open outlet bar60 °CAXORon select buttonYesNot applicableNot ApplicableNot Applicable
26 862 xx0VariousG 1/2open outlet bar60 °CHansgroheon coverYesNot applicableNot ApplicableNot Applicable

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.


Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 82 of 82

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.