Hansgrohe SE Approvals


#241002035

Range of wall mounted concealed thermostatic blending valves with (brass bodies – various finishes), incorporating single lever or cross top operating members. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002035
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
For use with Hansgrohe iBox 01 180
Marking:
Axor on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
Trim Kits: 10 710 xx0 (Cross top) 10 716 xx0 (Cross top) 16 810 xx0 (Cross Top) 16 823 xx0 (Single Lever) 34 715 xx0 (Single Lever) 38 375 xx0 (Single Lever) Basic Set: 30675100 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#241002036

Range of concealed thermostatic shower mixers (brass bodies - various finishes). The flow is controlled by a four-way manual diverter (3 on, 1 off positions) with single lever, cube type or dome type operating members. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button with single lever, cube type, dome type or cross top operating members. The inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002036
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
I-box rough in set 01700180 is not approved in its own right.
Size:
To be installed with rough set 01700180 ¾” BSP (F)
Marking:
AXOR on the escutcheon
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
Finish set. 10 720 xx0 10 726 xx0 11 733 xx0 12 716 xx0 16 820 xx0 16 821 xx0 34 725 xx0 38 720 xx0 39 720 xx0 39 725 xx0 Functional block 30105331 30675000 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#241002040

Range of wall mounted, thermostatic, shower mixers, (brass bodies - various finishes) incorporating a two-way ceramic disc diverter headwork to control the flow between two shower outlets with dome type operating members. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button with a dome type operating member. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002040
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The products are supplied with a shower hose, handset and overhead shower.
Size:
3/4" BSP (M) X 1/2" BSP (M) Offset Unions
Marking:
Hansgrohe on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
26 790 xx0 Hansgrohe Croma Select S 280 Showerpipe 26 794 xx0 Hansgrohe Croma Select S 280 Showerpipe EcoSmart 9l 26 890 xx0 Hansgrohe Croma Select S Showerpipe 280 1jet with thermostat and hand shower Raindance Select S 120 3jet 26 891 xx0 Hansgrohe Croma Select S Showerpipe 280 1jet EcoSmart 9 l/min with thermostat and hand shower Raindance Select S 120 3jet Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval


#241002045

Range of three-hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes). Incorporating a ceramic cartridge headwork with a single lever operating member and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts Maximum working pressure 10.0 Bar. Maximum operating temperature 60 °C

Section:
0655 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
241002045
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The products are supplied with a shower hose and handset Product 71 730 xx0 to be installed in combination with 13437180 Basic set for 3-hole rim mounted single lever bath mixer (WRAS 2303055). Product 71 731 xx0 to be installed in combination with 13439180 Basic set for 3-hole rim mounted single lever bath mixer (WRAS 2311033).
Size:
½” BSP (M)
Marking:
Hansgrohe on spout and operating member
Installation Requirements:
R001 R006 R007 R030
Expiry date:
31/10/2029
Model:
71 730 xxx Hansgrohe Talis E 3-hole rim mounted bath mixer 71 731 xxx Hansgrohe Talis E 3-hole rim mounted bath mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#241002050

Range of single hole, single outlet fixed combination tap assemblies (brass bodies - various finishes) incorporating quarter turn ceramic disc headworks with dome type operating members. The temperature is controlled via a thermostatic mixing cartridge with a dome type operating member. The spout outlet incorporates an aerator. The inlet hoses each incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
241002050
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
AXOR on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2029
Model:
12 010 xxx Axor Starck Organic 2-handle basin mixer 80 with pop-up waste set 12 011 xxx Axor Starck Organic 2-handle basin mixer 80 without pull-rod 12 012 xxx Axor Starck Organic 2-handle basin mixer 170 without pull-rod for wash bowls 12 013 xxx Axor Starck Organic 2-handle basin mixer 240 without pull-rod for wash bowls 12 014 xxx Axor Starck Organic 2-handle basin mixer 50 with pop-up waste set for hand wash basins available in -000 (Chrome) and customized finishes: Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 76 of 82

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.