Hansgrohe SE Approvals


#240202062

Range of shower arms and ceiling connectors (brass bodies – various finishes) & overhead shower outlets (plastic bodies - various finishes), incorporating EPDM O rings, plastic flow regulators and stainless-steel strainers. Open outlet use only. Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240202062
Size:
See models
Marking:
AXOR on body
Installation Requirements:
R001 R040
Expiry date:
28/02/2029
Model:
½” BSP (F) on models 35 373 xxx Overhead shower 245/185 1jet 35 383 xxx Overhead shower 220 1jet EcoSmart 35 389 xxx Overhead shower 245 1jet EcoSmart+ 35 374 xxx Overhead shower 245/185 1jet EcoSmart 35 387 xxx Overhead shower 245/185 1jet EcoSmart+ 35 382 xxx Overhead shower 220 1jet 35 388 xxx Overhead shower 220 1jet EcoSmart+ 35 380 xxx Overhead shower 245 1jet 35 381 xxx Overhead shower 245 1jet EcoSmart ½” BSP (M) X ½” BSP (M) on models: 26 433 xxx Ceiling connector 300 mm 26 436 xxx Shower arm 390 mm square 26 965 xxx Ceiling connector 100 mm softsquare 26 432 xxx Ceiling connector 100 mm 26 431 xxx Shower arm 390 mm 26 437 xxx Ceiling connector 100 mm square 26 438 xxx Ceiling connector 300 mm square 26 966 xxx Ceiling connector 300mm softsquare 26967 xxx Shower arm 390mm softsquare ADDITIONAL INFORMATION: Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240204024

Range of wall mounted thermostatic shower valves incorporating detent headworks controlling the flow. Temperature is controlled via a thermostatic cartridge incorporating a manual override button. Both inlets incorporate approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). The products are supplied with a shower hose, shower handset and over head shower. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240204024
Size:
1/2” BSP (M)
Marking:
Hansgrohe on body, hand shower and overhead shower.
Installation Requirements:
R001 R010 R040
Expiry date:
28/02/2029
Model:
24 220 xx0 hansgrohe Pulsify S Showerpipe 260 1jet with ShowerTablet Select 400 24 221 xx0 hansgrohe Pulsify S Showerpipe 260 1jet EcoSmart with ShowerTablet Select 400 24 240 xx0 hansgrohe Pulsify S Showerpipe 260 2jet with ShowerTablet Select 400 24 241 xx0 hansgrohe Pulsify S Showerpipe 260 2jet EcoSmart with ShowerTablet Select 400 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240204039

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240204039
Note:
This product is supplied with a click type waste set – Verified by test
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” BSP captive nut end connections.
Marking:
Hansgrohe on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
28/02/2029
Model:
73060xxO 73360xxO

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240204025

Wall mounted two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating detent headworks controlling flow to either bath or shower. A thermostatic cartridge controlling the temperature incorporating a manual override button. The spout outlet incorporates a plastic aerator. Inlets incorporate a approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose, handset and overhead shower. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240204025
Size:
½” BSP (M)
Marking:
Hansgrohe on body, hand shower and overhead shower.
Installation Requirements:
R001 R010 R040
Expiry date:
28/02/2029
Model:
24 230 xx0 hansgrohe Pulsify S Showerpipe 260 1jet with bath thermostat ShowerTablet 400 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2311311

Range of wall mounted, two-hole, single outlet, (fixed), combination tap assemblies (chromium plated brass bodies) incorporating ceramic cartridge headworks with single lever operating members and self-cancelling diverter to shower outlet. The spout outlet incorporate a plastic aerator. Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2311311
Note:
The products are not supplied with a shower hose or handset.
Size:
1/2 “ BSP (M)
Marking:
Hansgrohe on body
Installation Requirements:
R001 R020
Expiry date:
30/11/2028
Model:
73420xxO 73422xxO
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 65 of 82

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.