Hansgrohe SE Approvals


WRAS Approval Number: 1805028

‘Axor Citterio E’ range of wall mounted, concealed thermostatic shower control valves (DZR brass bodies - trims in various finishes), incorporating a non-rising spindle headwork controlling flow using a cross top operating member, and a manual diverter valve directing the flow between multiple shower outlets using single lever operating members. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member and a manual override button. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1805028
  • Expiry date: 31/05/2023
  • Note: Not supplied with shower hose and handset.
  • Size: ¾” BSP (F).
  • Marking: Basic sets: Hansgrohe and DR on body. Finish sets: Axor on dome type operating member.
  • Installation Requirements R001 R010 R040
  • Model
    Basic Sets: 36 701 xxx - Axor Citterio E (2 outlets) & 36 708 xxx - Axor Citterio E (3 outlets). For use with finish sets: 36 703 xxx - Axor Citterio E (2 outlets) & 36 704 xxx - Axor Citterio E (3 outlets). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805047

Single hole single outlet (swivel) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1805047
  • Expiry date: 31/05/2023
  • Size: Stainless steel braided thermoplastic silicone rubber (TPSiV) lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: ‘Hansgrohe’ on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    73 872 xxx - Hansgrohe M53 M531-H280 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805014

‘Axor’ range of shower outlet elbows (brass bodies – in various finishes) with shower handset holder. The product incorporates a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection. Maximum operating temperature 80°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1805014
  • Expiry date: 31/05/2023
  • Note: Open outlet use only. Not supplied with shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: AXOR on backplate
  • Installation Requirements R001 R040
  • Model
    11 626 xxx - Axor Urquiola Porter unit Softcube. 19 622 xxx - Axor Bouroullec Porter unit. 36 724 xxx - Axor Citterio E Porter unit 120/120 Softcube. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805016

Wall mounted bar type thermostatic shower mixer (chromium plated brass), incorporating a ½ turn ceramic disc headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member. Both inlets incorporate a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1805016
  • Expiry date: 31/05/2023
  • Note: Not supplied with shower hose and handset.
  • Size: ½” x ¾” offset union.
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R010 R040
  • Model
    13 211 xxx - Hansgrohe Ecostat 1001 CL Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805017

‘Hansgrohe Ecostat Select’ range of wall mounted thermostatic shower valves with brass bodies (various finishes), incorporating a ½ turn ceramic disc headwork controlling the flow using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge using a single lever operating member and a manual override button. Both inlets incorporate a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection and stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1805017
  • Expiry date: 31/05/2023
  • Note: Not supplied with shower hose and handset.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe on body
  • Model
    Hansgrohe Ecostat Select Range: 13 161 xxx & 13 162 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805024

‘Axor’ wall mounted shower outlet elbow and handset retainer with chromium plated brass body. The shower outlet connection incorporates an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum operating temperature 70°C. Maximum working pressure 10.0 bar.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1805024
  • Expiry date: 31/05/2023
  • Size: ½” BSP (M)
  • Marking: Axor on the front plate.
  • Installation Requirements R001
  • Model
    45 723 xxx - Axor Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805046

Wall mounted bar type thermostatic bath shower mixer (chromium plated brass), incorporating a shut off diverter valve controlling the flow to either the spout outlet or shower outlet with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge using a single lever operating member. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless steel strainers. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1805046
  • Expiry date: 31/05/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” x ¾” off set union.
  • Marking: Hansgrohe on underside of body.
  • Installation Requirements R001 R020
  • Model
    Hansgrohe Ecostat Range: 13 112 xxx, 13 114 xxx (Comfort) & 13 115 xxx (Comfort Care). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807024

Wall mounted spout outlet with brass body (various finishes) incorporating a plastic aerator. Maximum operating temperature 60 °C.

  • Section: 0682 Combination Tap Assemblies
  • Section Subtitle: Spout outlets.
  • WRAS Approval Number: 1807024
  • Expiry date: 31/07/2023
  • Note: Open outlet use only.
  • Size: ¾” BSP (M)
  • Marking: Hansgrohe Logo on wall plate
  • Installation Requirements R001 R040
  • Model
    Hansgrohe Metropol - 32 542 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807025

‘Axor Uno’ wall mounted, two hole, single outlet (fixed) combination tap assembly (brass body - in various finishes), incorporating a ceramic cartridge headwork with single lever operating member and a self-cancelling diverter to a shower outlet. The shower outlet connection incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and the spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1807025
  • Expiry date: 31/07/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: ½” x ¾” offset unions
  • Marking: AXOR on body
  • Installation Requirements R001 r030
  • Model
    Axor Uno - 38 421 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807026

‘Hansgrohe Ecostat Select’ wall mounted, two-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ½ turn ceramic disc headwork with a single lever operating member and self-cancelling diverter to shower outlet. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member. The spout outlet incorporates a plastic aerator. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1807026
  • Expiry date: 31/07/2023
  • Size: ½” BSP (M)
  • Marking: Hansgrohe logo on body
  • Installation Requirements R001 R030
  • Model
    Hansgrohe Ecostat Select - 13 141 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 6 of 32