Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3) Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

0531 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)

WRAS Approval Number:

250402016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4" BSP (M) X 1/2" BSP (M) offset union

Marking:

Hansgrohe logo on operating member.

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

75 423 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Phone

+49 170 4471 718

View All Listings by this Company

Range of wall mounted, concealed, thermostatic shower valves with (brass bodies – various trim set finishes. Incorporating a quarter turn ceramic disc headwork which controls the flow using dome type operating member. Temperature is controlled independently via a thermostatic cartridge also using a dome type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250402031

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

To be used with rough set 15896180 which has 1/2" BSP (F) inlets

Marking:

Hansgrohe logo on face plate, Hansgrohe logo on valve body.

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

15896180 15872000 15872670 15874000 15874670 15838000 15838670 15847000 15847670

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of wall mounted thermostatic shower valves, (brass bodies - various finishes) incorporating a two-way manual diverter headwork controlling the flow to either an overhead shower or shower handset. The temperature is controlled via a thermostatic cartridge incorporating a manual override button. The inlets on the shower valve and shower handset incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250402035

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4'' BSP (m) x 1/2'' BSP (m) offset union

Marking:

Hansgrohe on valve body, Hansgrohe on overhead shower face

Installation Requirements:

R001 R010 R040

Expiry date:

30/04/2030

Model:

27 267 xx0 27 268 xx0 27 271 xx0 27 281 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Phone

+49 170 4471 718

View All Listings by this Company

Range of shower outlets, (plastic bodies - chrome plated) incorporating a plastic flow regulator. Products 24 540 xx0, 24 541 xx0, 24 550 xx0, 24 551 xx0 to be installed together with 24 573 180 Hansgrohe Raindance Alive Basic set. Maximum operating temperature 60°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250404023

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

Hansgrohe on face plate

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

24 520 XX0 24 521 XX0 24 530 XX0 24 531 XX0 24 540 XX0 24 541 XX0 24 550 XX0 24 551 XX0 24 573 180 300190XX 300191XX 300193XX 300194XX 310190XX 310193XX 310194XX 340190XX 340191XX Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company