Hansgrohe SE Approvals


#2306704

‘Axor’ wall mounted shower outlet (brass body – various finishes). The shower outlet incorporates an approved check valve cartridge; however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum operating temperature 70.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2306704
Size:
½” BSP (M)
Marking:
Axor on the front plate.
Installation Requirements:
R001 R040
Expiry date:
30/06/2028
Model:
45 723 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2304024

Range of two-hole, single outlet, wall mounted combination tap assemblies with (brass body - various finishes), incorporating a ceramic cartridge headworks with single lever operating members and a self-cancelling diverter to the shower outlet. Spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2304024
Size:
½” to ¾” (M) BSP offset unions.
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R030
Expiry date:
30/04/2028
Model:
71 400 xx0, 71 475 xx0, 71 476 xx0. The colour code (xx) of the above-mentioned mixers can be as follows: -00 Chrome -02 Polished Chrome PVD, -13 Polished Bronze PVD.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2308700

Wall mounted spout outlet with brass body (various finishes) incorporating a plastic aerator. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
2308700
Size:
¾” BSP (M).
Marking:
Hansgrohe on wall plate.
Installation Requirements:
R001 R040
Expiry date:
31/08/2028
Model:
Metropol - 32 542 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2304032

Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes) incorporating a ceramic disc headwork which controls flow and diverts flow between either bath or overhead shower mode with a single lever operating member. The temperature is controlled by a thermostatic cartridge and dome operating member with a manual override. Also incorporates a self-cancelling diverter for spout to the shower handset outlet. The spout outlet incorporates a plastic aerator. The shower outlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products are supplied with a shower hoses and handsets. Maximum working pressure: 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2304032
Size:
3/4" X 1/2" BSP offset union.
Marking:
Hansgrohe on body, shower pole and head.
Installation Requirements:
R001 R030
Expiry date:
30/04/2028
Model:
26 792 xxx Hansgrohe Croma Select S Showerpipe 280 1jet mit Wannenthermostat. 27 351 400 Hansgrohe Croma Select S Showerpipe 180 2jet mit Wannenthermostat. 27 352 400 Hansgrohe Croma Select E Showerpipe 180 2jet mit Wannenthermostat. XXX denotes to the finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2304035

Range of spout outlets with (brass bodies - various finishes), incorporating an plastic aerator. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
2304035
Size:
½” BSP (M)
Marking:
Hansgrohe on back plate.
Installation Requirements:
R001 R040
Expiry date:
30/04/2028
Model:
72 430 XXX 72 431 XXX Where xxx denotes the surface finish (which is non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 40 of 81

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.