Hansgrohe SE Approvals


#240188001

Range of ‘Waterforms’ wall mounted, thermostatic blending valves with (brass bodies - various finishes), incorporating a manual diverter which controls the flow. Temperature is controlled independently via a thermostatic cartridge with dome type operating members incorporating a manual override. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose, handset and overhead shower. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240188001
Size:
¾” BSP (M) x ½” BSP (M) offset unions.
Marking:
Shower Valve - Hansgrohe on body. Overhead shower for 26985xxx - Hansgrohe on edge of shower head. Overhead shower for 26986xxx - Hansgrohe on shower face. Shower Handset for 26985xxx - HANSGROHE on body. Shower Handset for 26986xxx - Hansgrohe & Crometta on body. Shower pipe riser rail - Hansgrohe on handset holder. Shower hose for 26985xxx - Hansgrohe or AXOR (brand of Hansgrohe) on captive nut. Shower hose for 26986xxx - Hansgrohe on conical nut.
Installation Requirements:
R001 R020
Expiry date:
31/01/2029
Model:
26985xx0 & 26986xx0. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240188002

Range of ‘Pulsify’ shower hose, handset and riser rail sets (plastic bodies - various finishes). Maximum working pressure: Open outlet. Maximum operating temperature: 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240188002
Size:
TPE lined shower hose with PVC outer and ½” captive nut end connections.
Marking:
24 370 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 371 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 380 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 381 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 372 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 373 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 382 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 383 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder.
Installation Requirements:
R001 R040
Expiry date:
31/01/2029
Model:
24 370 xx0 - Hansgrohe Pulsify E - Shower set 100 1jet EcoSmart with shower bar - 65cm, 24 371 xx0 - Hansgrohe Pulsify E - Shower set 100 1jet EcoSmart+ with shower bar - 65cm, 24 380 xx0 - Hansgrohe Pulsify E - Shower set 100 1jet EcoSmart with shower bar - 90 cm, 24 381 xx0 - Hansgrohe Pulsify E - Shower set 100 1jet EcoSmart+ with shower bar - 90 cm. Models added May 2024: 24 372 xx0 - Hansgrohe Pulsify S - Shower set 100 1jet EcoSmart with shower bar - 65cm, 24 373 xx0 - Hansgrohe Pulsify S - Shower set 100 1jet EcoSmart+ with shower bar - 65cm, 24 382 xx0 - Hansgrohe Pulsify S - Shower set 100 1jet EcoSmart with shower bar - 90 cm, 24 383 xx0 - Hansgrohe Pulsify S - Shower set 100 1jet EcoSmart+ with shower bar - 90 cm. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2312022

Range of wall mounted, concealed thermostatic shower valves (brass bodies – various finished trim sets). All models comprise of an iBox that can consist of the following combinations. iBox incorporating a thermostatic cartridge with a dome type operating member. iBox incorporating a thermostatic cartridge with a dome type operating member and a detent headwork with a push button operating member to a shower outlet. iBox incorporating a thermostatic cartridge with a dome type operating member and two detent headworks with push button headworks to multiple shower outlets. iBox incorporating a thermostatic cartridge with a dome type operating member, two detent headworks with push button operating members to shower outlets and an internal shut off valve. All models incorporate approved single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C Models added December 2024: Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2312022
Note:
The products are not supplied with a shower hose, handset or overhead shower assembly.
Size:
1/2” BSP (F) (IBOX connection)
Marking:
Hansgrohe logo on operating member or AXOR on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2028
Model:
Thermostat cartridge. 15 559 xx0 15 574 xx0 15 588 xx0 Thermostatic cartridge 1 function. 15 553 xx0 15 562 xx0 15 571 xx0 15 575 xx0 15 581 xx0 15 589 xx0 Thermostatic cartridge 2 functions. 15 554 xx0 15 572 xx0 15 573 xx0 Thermostatic cartridge 3 functions. 15 587 xx0 15 583 xx0 15 558 xx0 Product to be installed in combination with iBox universal 2 Basic Set 01500180. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish Models added December 2024: Basic Set 01 400 180 Finish sets 36 751 xx0 36 759 xx0 36 774 xx0 36 775 xx0 36 776 xx0 36 777 xx0 36 778 xx0 Valve for concealed installation (to be installed in combination with AXOR Thermostat – see additional information) 36 779 xx0 36 780 xx0 36 781 xx0 Functional unit 30041131 30041031 30041331 30041231 30008731 30008531 30008931 30008831 30008431 30008131 Additional information: Products 36 779 xx0 and 15 558 xx0 to be installed in combination with 36 776 xx0 or 36 759 xx0. Products 36 780 xx0 and 15 573 xx0 to be installed in combination with 36 777 xx0 or 36 774 xx0. Products 36 781 xx0 and 15 587 xx0 to be installed in combination with 36 778 xx0 or 36 775 xx0.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240202014

Range of wall mounted, manual blending valves, (brass bodies – various finishes), incorporating a ceramic disc headwork controlling the flow with a dome type operating member, temperature is controlled via a ceramic cartridge with a dome type operating member. Model 12 670 xx0 is supplied with a shower hose, handset and overhead shower. The outlet to the shower hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset inlet incorporates a plastic flow regulator. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
240202014
Size:
For use with Rough Kit 10902180 which has ½” BSP (M) inlets
Marking:
Axor logo on body
Installation Requirements:
R001 R010 R040
Expiry date:
28/02/2029
Model:
12 670 xx0 AXOR Starck Nature shower column with overhead shower 240 1jet 12 671 xx0 AXOR Starck Nature shower column with overhead 240 1jet without hand shower 13 608 xx0 Axor Starck Extension set 80mm Where xx0 denotes the finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples; 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240202015

Range of wall mounted, thermostatic blending valves (brass bodies – various finishes), incorporating a ceramic disc headwork controlling the flow with a dome type operating member, temperature is controlled via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The product is supplied with a shower hose, handset and overhead shower. The outlet to the shower hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset inlet incorporates a plastic flow regulator. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240202015
Size:
For use with rough kit 10902180 which has ½” BSP (M) inlets
Marking:
Axor on body
Installation Requirements:
R001 R010 R040
Expiry date:
28/02/2029
Model:
12 672 xx0 Axor Starck Shower column with thermostat and overhead shower 240 1jet 13 608 xx0 Axor Starck Extension set 80mm Where xx0 denotes the finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples; 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240202027

Pillar tap with (brass body - various finishes) incorporating a quarter turn ceramic disc headwork situated on the spout outlet with a cylinder type operating member. The spout outlet incorporates a plastic spray disc and a flow regulator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
1800 Taps
Section Subtitle:
Pillar tap(s).
WRAS Approval Number:
240202027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8 captive nut end connections
Marking:
AXOR on body
Installation Requirements:
R001 R006 R009
Expiry date:
28/02/2029
Model:
12 110 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240202033

Range of four-hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator. The products are supplied with a shower hose and handset. The shower handset inlet incorporates a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
240202033
Note:
The products are to be used with rough kit 13 444 180 Hansgrohe basic set for 4-hole rim mounted bath mixer or 15 480 180 AXOR basic set for 4-hole rim mounted bath mixer which are not part of this approval
Size:
Specifically for use with rough kit 13 444 180 or 15 480 180 which both have ½” BSP (M) inlets
Marking:
Axor or Hansgrohe on spout
Installation Requirements:
R001 R006 R020
Expiry date:
28/02/2029
Model:
39 446 xx0 (lever) 39 445 xx0 (cross top) 31 442 xx0 (lever) 16 546 xx0 (cross top) Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240204013

Range of wall mounted, thermostatic blending valves, (brass bodies various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow.Temperature is controlled independently via a thermostatic cartridge with a manual override button incorporating dome or lever type operating members, Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240204013
Size:
½” BSP (M) x ¾” BSP (M) offset unions.
Marking:
Hansgrohe on body
Installation Requirements:
R001 R010 R040
Expiry date:
28/02/2029
Model:
13 113 xx0 Hansgrohe Ecostat 13 116 xx0 Hansgrohe Ecostat 13 117 xx0 Hansgrohe Ecostat 15 368 xx0 Hansgrohe Versostat 13 324 xx0 Hansgrohe Ecostat Fine 13 346 xx0 Hansgrohe Element Models added May 2024: 13 323 xx0 & 13 382 xx0.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240202056

Range of overhead shower outlets with chromium plated plastic bodies. The inlets incorporate combined EPDM washers and stainless-steel strainers. Maximum working pressure: open outlet use only Maximum operating temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240202056
Note:
Product to be used in combination with AXOR ShowerSolutions Basic set for overhead shower with shower arm 35361180 (W0758026).
Size:
12.59mm OD
Marking:
Axor on body.
Installation Requirements:
R001 R040
Expiry date:
28/02/2029
Model:
12 596 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240202060

Range of shower arms and ceiling connectors (brass bodies – various finishes) & overhead shower outlets (plastic bodies - various finishes), incorporating EPDM O rings, plastic flow regulators and stainless-steel strainers. Open outlet use only Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240202060
Size:
½” BSP M ½” BSP F 15mm Spigot
Marking:
Hansgrohe logo on side of shower
Installation Requirements:
R001 R040
Expiry date:
28/02/2029
Model:
Raindance Select S: 30 149 198 Overhead shower 240 2jet, 30 149 298 Overhead shower 300 2jet, 26 466 xx0 Overhead shower 240 2jet with shower arm, 26 467 xx0 Overhead shower 240 2jet with ceiling connector, 27 378 xx0 Overhead shower 300 2jet with shower arm, 27 337 xx0 Overhead shower 300 2jet with ceiling connector. -020 PVD polished chrome -260 PVD brushed chrome. -830 PVD polished nickel -820 PVD brushed nickel. -990 PVD polished gold optic -250 PVD brushed gold optic. -300 PVD polished red gold -310 PVD brushed red gold. -130 PVD polished bronze -140 PVD brushed bronze. -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass. -800 PVD stainless steel optic
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 32 of 41

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.