Hansgrohe SE Approvals


#2307043

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with or without a pop-up waste (see model), Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2307043
Size:
71 443 xxx and 31931xx0 models: Stainless steel braided thermoplastic silicone rubber (TPSiV) lined flexible hose assemblies incorporating ⅜” captive nut end connections. All other models: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2028
Model:
71 581 xxx Vernis Blend Single lever basin mixer 190 with metal pop-up waste set, 71 582 xxx Vernis Blend Single lever basin mixer 190 without waste set, 71 562 xxx Vernis Shape Single lever basin mixer 190 with pop-up waste set, 71 590 xxx Vernis Shape Single lever basin mixer 190 with metal pop-up waste set, 71 591 xxx Vernis Shape Single lever basin mixer 190 without waste set, 71 552 xxx Vernis Blend Single lever basin mixer 190 with pop-up waste set, 71 443 xxx Vernis Blend Single lever bath mixer Monotrou. 31 931 xx0 Focus Blend Single lever bath mixer Monotrou. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2401711

Range of concealed, wall mounted rough sets with DZR brass bodies. Maximum working pressure 10.0 Bar. Maximum operating temperature 75.0°C.

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
2401711
Size:
1/2" BSP (F).
Marking:
Hansgrohe (13 622 180) or AXOR (13 623 180) on body.
Installation Requirements:
R001 R010
Expiry date:
31/01/2029
Model:
13 622 180, 13 623 180.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2312322

Range of single hole, single outlet (swivel nozzle) tap (chrome plated brass) incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0410 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet swivel spout with swivel nozzle.
WRAS Approval Number:
2312322
Size:
Stainless steel braided PEX lined hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
Hansgrohe SE on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2028
Model:
73200xx0 73201xx0 Models added June 2024: 46 210 xx0 46 211 xx0

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240102009

Range of concealed diverter valves with (brass bodies), incorporating a ceramic disc diverter. The product can be supplied with a trim set and dome, lever or cross top type operating members (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2050 Diverter
Section Subtitle:
Diverter cartridge(s) with manual adjustment.
WRAS Approval Number:
240102009
Size:
½” BSP (F) x ¾” BSP (F) – Model 36 770 180 only ¾” BSP (F) – other models
Marking:
Axor on faceplate
Installation Requirements:
R001 R040
Expiry date:
31/01/2029
Model:
Basic sets - can be installed in conjunction with any of the trim sets: 15 930 180 & 16 930 180 Hansgrohe Basic set for Quattro four-way diverter valve for concealed installation. 15 981 180 & 16 982 180 Hansgrohe Basic set for Trio diverter valve for concealed installation. 36 770 180 AXOR Basic set for Trio/Quattro Shut-off/ diverter valve for concealed installation. Trim sets (dome type operating member unless stated): 10 932 xxx AXOR Shower Collection Trio/Quattro diverter valve 120/120 Square for concealed Installation, 11 925 xxx AXOR Urquiola Trio/Quattro diverter valve for concealed installation (cube type operating member), 12 731 xxx AXOR Starck Organic Trio/Quattro diverter valve for concealed installation 12 x 12, 15 932 xxx Hansgrohe Trio/Quattro S diverter valve for concealed Installation, 34 920 xxx AXOR Citterio M Trio/Quattro diverter valve for concealed installation, 38 933 xxx AXOR Uno Trio/Quattro diverter valve for concealed installation, 39 920 xxx AXOR Citterio Trio/Quattro diverter valve for concealed installation (single lever operating member), 39 925 xxx AXOR Citterio Trio/Quattro diverter valve for concealed installation (cross top operating member). Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. Finish set need to be installed with the foreseen basic set (see basic set list).
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240102020

Range of three-hole, single outlet (swivel) combination tap assemblies with (brass bodies -various finishes), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate a plastic aerator. The product is supplied with a stainless steel braided PEX lined flexible hose assemblies for connection between the side valves and the spout. Maximum working pressure 10.0 Bar. Maximum operating temperature 70.0°C.

Section:
0660 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240102020
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
AXOR on body.
Installation Requirements:
R001 R006 R007 R009 R010
Expiry date:
31/01/2029
Model:
38 054 xx0 45 133 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240102073

Range of concealed and exposed wall mounted manually operated shower blending valves (brass bodies - various finishes) with a ceramic cartridge headwork and a single lever operating member. The outlet to the shower hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
240102073
Size:
½” BSP (M) x ¾” BSP (M) offset union or ½” BSP (F).
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2029
Model:
13 620 180 71 649 xxx 71 658 xxx 71 640 xxx 71 650 xxx 71 447 xxx 71 457 xxx Where xxx denotes the surface finish (which is a non‐water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240188001

Range of ‘Waterforms’ wall mounted, thermostatic blending valves with (brass bodies - various finishes), incorporating a manual diverter which controls the flow. Temperature is controlled independently via a thermostatic cartridge with dome type operating members incorporating a manual override. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose, handset and overhead shower. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240188001
Size:
¾” BSP (M) x ½” BSP (M) offset unions.
Marking:
Shower Valve - Hansgrohe on body. Overhead shower for 26985xxx - Hansgrohe on edge of shower head. Overhead shower for 26986xxx - Hansgrohe on shower face. Shower Handset for 26985xxx - HANSGROHE on body. Shower Handset for 26986xxx - Hansgrohe & Crometta on body. Shower pipe riser rail - Hansgrohe on handset holder. Shower hose for 26985xxx - Hansgrohe or AXOR (brand of Hansgrohe) on captive nut. Shower hose for 26986xxx - Hansgrohe on conical nut.
Installation Requirements:
R001 R020
Expiry date:
31/01/2029
Model:
26985xx0 & 26986xx0. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240188002

Range of ‘Pulsify’ shower hose, handset and riser rail sets (plastic bodies - various finishes). Maximum working pressure: Open outlet. Maximum operating temperature: 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240188002
Size:
TPE lined shower hose with PVC outer and ½” captive nut end connections.
Marking:
24 370 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 371 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 380 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 381 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 372 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 373 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 382 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder. 24 383 xx0: Shower Hose – Hansgrohe on conical nut. Shower Handset – Hansgrohe on body. Riser Rail – Hansgrohe on handset holder.
Installation Requirements:
R001 R040
Expiry date:
31/01/2029
Model:
24 370 xx0 - Hansgrohe Pulsify E - Shower set 100 1jet EcoSmart with shower bar - 65cm, 24 371 xx0 - Hansgrohe Pulsify E - Shower set 100 1jet EcoSmart+ with shower bar - 65cm, 24 380 xx0 - Hansgrohe Pulsify E - Shower set 100 1jet EcoSmart with shower bar - 90 cm, 24 381 xx0 - Hansgrohe Pulsify E - Shower set 100 1jet EcoSmart+ with shower bar - 90 cm. Models added May 2024: 24 372 xx0 - Hansgrohe Pulsify S - Shower set 100 1jet EcoSmart with shower bar - 65cm, 24 373 xx0 - Hansgrohe Pulsify S - Shower set 100 1jet EcoSmart+ with shower bar - 65cm, 24 382 xx0 - Hansgrohe Pulsify S - Shower set 100 1jet EcoSmart with shower bar - 90 cm, 24 383 xx0 - Hansgrohe Pulsify S - Shower set 100 1jet EcoSmart+ with shower bar - 90 cm. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2312022

Range of wall mounted, concealed thermostatic shower valves (brass bodies – various finished trim sets). All models comprise of an iBox that can consist of the following combinations. iBox incorporating a thermostatic cartridge with a dome type operating member. iBox incorporating a thermostatic cartridge with a dome type operating member and a detent headwork with a push button operating member to a shower outlet. iBox incorporating a thermostatic cartridge with a dome type operating member and two detent headworks with push button headworks to multiple shower outlets. iBox incorporating a thermostatic cartridge with a dome type operating member, two detent headworks with push button operating members to shower outlets and an internal shut off valve. All models incorporate approved single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C Models added December 2024: Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2312022
Size:
1/2” BSP (F) (IBOX connection)
Marking:
Hansgrohe logo on operating member or AXOR on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2028
Model:
Thermostat cartridge. 15 559 xx0 15 574 xx0 15 588 xx0 Thermostatic cartridge 1 function. 15 553 xx0 15 562 xx0 15 571 xx0 15 575 xx0 15 581 xx0 15 589 xx0 Thermostatic cartridge 2 functions. 15 554 xx0 15 572 xx0 15 573 xx0 Thermostatic cartridge 3 functions. 15 587 xx0 15 583 xx0 15 558 xx0 Product to be installed in combination with iBox universal 2 Basic Set 01500180. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish Models added December 2024: Basic Set 01 400 180 Finish sets 36 751 xx0 36 759 xx0 36 774 xx0 36 775 xx0 36 776 xx0 36 777 xx0 36 778 xx0 Valve for concealed installation (to be installed in combination with AXOR Thermostat – see additional information) 36 779 xx0 36 780 xx0 36 781 xx0 Functional unit 30041131 30041031 30041331 30041231 30008731 30008531 30008931 30008831 30008431 30008131 Additional information: Products 36 779 xx0 and 15 558 xx0 to be installed in combination with 36 776 xx0 or 36 759 xx0. Products 36 780 xx0 and 15 573 xx0 to be installed in combination with 36 777 xx0 or 36 774 xx0. Products 36 781 xx0 and 15 587 xx0 to be installed in combination with 36 778 xx0 or 36 775 xx0.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240202014

Range of wall mounted, manual blending valves, (brass bodies – various finishes), incorporating a ceramic disc headwork controlling the flow with a dome type operating member, temperature is controlled via a ceramic cartridge with a dome type operating member. Model 12 670 xx0 is supplied with a shower hose, handset and overhead shower. The outlet to the shower hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset inlet incorporates a plastic flow regulator. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
240202014
Size:
For use with Rough Kit 10902180 which has ½” BSP (M) inlets
Marking:
Axor logo on body
Installation Requirements:
R001 R010 R040
Expiry date:
28/02/2029
Model:
12 670 xx0 AXOR Starck Nature shower column with overhead shower 240 1jet 12 671 xx0 AXOR Starck Nature shower column with overhead 240 1jet without hand shower 13 608 xx0 Axor Starck Extension set 80mm Where xx0 denotes the finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples; 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 32 of 41

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.