Range of single hole, single outlet (swivel) combination tap assemblies (various finishes, see model), incorporating a quarter turn ceramic disc headwork with cross top or dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60 °C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2003052

Expiry date:

31/03/2025

Size:

stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜" BSP captive nut end connections.

Marking:

Hansgrohe on front of body

Installation Requirements:

R001 R006 R009 R010

Model:

71 280 xxx Logis M31 2-handle kitchen mixer 220 (Dome) 71 285 xxx Logis M32 Classic 2-handle kitchen mixer 220 (Cross) Model added February 2021: 71 283 xxx Logis M32 2-handle kitchen mixer 220 Eco Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD Stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of concealed, thermostatic blending valves (brass body). The flow is controlled via ‘detent’ (push to on push to off) headworks. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2004021

Expiry date:

30/04/2025

Note:

The Hansgrohe iBox 01800180 is not covered by this approval.

Size:

Body for insertion into Hansgrohe iBox 01800180 (not supplied)

Marking:

AXOR on faceplate

Installation Requirements:

R001 R010 R040

Model:

36 707 xxx Axor ShowerSelect 36 715 xxx Axor ShowerSelect 36 723 xxx Axor ShowerSelect Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of shower handsets with chromium plated bodies. The products incorporate a strainer (stainless steel or plastic) at the inlet. All models, except 28 539 xxx, incorporate a plastic flow regulator at the inlet. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

WRAS Approval Number:

2004024

Expiry date:

30/04/2025

Note:

Open outlet use only. Claims of flow rate are made by the manufacturer and not considered part of the listing.

Size:

½” BSP (M).

Marking:

Hansgrohe, Croma and NF logo on body.

Installation Requirements:

R001 R040

Model:

28 535 xxx Hansgrohe Croma 100 Vario hand shower. 28 537 xxx Hansgrohe Croma 100 Vario hand shower EcoSmart 9 l/min. 28 536 xxx Hansgrohe Croma 100 Multi hand shower . 28 538 xxx Hansgrohe Croma 100 Multi hand shower EcoSmart 9 l/min. 28 539 xxx Hansgrohe Croma 100 Classic Multi hand shower. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of overhead shower outlets (various finishes) and concealed installation sets. Models 24 006 400, 24 016 400, 24 017 400, 35 281 xxx and 35 282 xxx incorporate a stainless-steel strainer on the inlet of and a plastic aerator on the shower head outlet. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2004026

Expiry date:

30/04/2025

Note:

Open outlet use only. The concealed installation sets are not approved in their own right.

Size:

½” BSP (M). ¾” BSP x ½” adapter.

Marking:

Hansgrohe on shower plate.

Installation Requirements:

R001 R040

Model:

Models for use with concealed installation set 24 010 180 Hansgrohe Rainmaker Select Basic: 24 006 400 Hansgrohe Rainmaker Select 460. 24 006 600 Hansgrohe Rainmaker Select 460. 24 016 400 Hansgrohe Rainmaker Select 460. 35 281 xxx AXOR ShowerSolutions Overhead shower 460/300. Models for use with concealed installation set 01800180: 24 007 400 Hansgrohe Rainmaker Select 460. 24 007 600 Hansgrohe Rainmaker Select 460. 24 017 400 Hansgrohe Rainmaker Select 460. 35 276 xxx AXOR ShowerSolutions Overhead shower 460/300. 35 282 xxx AXOR ShowerSolutions Overhead shower 460/300. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Thermostatic mixing valve with a brass body (chromium plated) with EPDM ‘O’-rings. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2004339

Expiry date:

30/04/2025

Size:

⅜” captive nut x ⅜” BSP (M)

Marking:

Hansgrohe and date of manufacture (DDD.YYYY) on body

Installation Requirements:

R001 R010 R040

Model:

30 71 62 18

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company