‘SCALA 2’ integrated, self-priming, plastic bodied (compact) mains pressure boosting pump. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240207701

Size:

1” BSPT (M) inlet and outlet.

Marking:

Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, Model, P/N no., Serial no., P/C no., technical info, manufacturing country and data matrix on adhesive label on end of motor housing.

Installation Requirements:

R001 R415

Expiry date:

28/02/2029

Model:

Scala2 Model2 3-45 AKCCDE, Scala2 Model2 3-45 AKCDDE, Scala2 Model2 3-45 AKCGDE.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

`UPM3` range of single stage circulator pumps, with stainless steel or plastic bodies, plastic impellers, ceramic shafts and bearings, EPDM 'O'-rings and seals. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240507701

Size:

Stainless steel body models (N): 1" BSP (M) (retrospectively added June 2024), 1½” BSP (M) & 2” BSP (M). Composite (plastic) body models (CIL3): 1” BSP (M).

Marking:

Grundfos logo, Grundfos and model on top of pump housing. Production number, serial number, and technical information on side of pump housing. Stainless steel models also have a flow arrow on the body.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

UPM3 **1-**2 N ***3 (GFNxx-). UPM3 **1-**2 - CIL3 ***3 (GFNxx-). Model added November 2024: ALPHA SOLAR 25-**2 N 180. Where: UPM3 & ALPHA SOLAR = pump type. For UPM3 these can also be: UPM3 HYBRID, UMP3 DHW, UPM3 K, UPM3 AUTO L UPM3 FLEX AS. **1 = size of inlet/outlet connection: N models – 25 = 1 ½”, 32 = 2”. CIL3 models – 15 = 1”. **2 = maximum head (dm): 20, 40, 50, 60, 70, 75 (all models). 105, 145 (stainless steel body models only). N = stainless steel body. CIL3 = composite (plastic) body. ***3 = port to port length in mm: 130 (all models) or 180 (ALPHA SOLAR 1½” model and 2” N models only).

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of in-line lever operated spherical valves with stainless steel bodies, stainless steel ball and PTFE seats. Maximum working pressure 16.0 bar. Maximum operating pressure 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

240607001

Size:

See model.

Marking:

Grundfos, DN size and PN16 on body.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

328W-6 (Valve cpl. flange integrated 1 1/4"): 1¼” BSP (F) x DN32 flange, 328W-7 (Valve cpl. flange integrated 1 1/2"): 1½” BSP (F) x DN40 flange, 328W-8 (Valve cpl. flange integrated 2"): 2” BSP (F) x DN50 flange.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of integrated water circuits incorporating a plate heat exchanger. The units incorporate a flow sensor, pressure relief valve set at 3.0 bar, and a primary circuit circulation pump. Maximum working pressure secondary circuit 10.0 bar. Maximum working pressure primary circuit 2.5 bar. Maximum operating temperature 70°C. Cold supply only.

Section:

1478 Heater

Section Subtitle:

Combination boilers - accessories and components.

WRAS Approval Number:

240507702

Size:

IWC Std.: Secondary circuit: ½” BSP (M) inlet x ½” BSP (M) outlet. Primary circuit: ¾” BSP (M) inlet x ¾” BSP (M) outlet. IWC Fgr.: Secondary circuit: F4 connection inlet x ½” BSP (M) outlet. Primary circuit: F4 connection inlet x ¾” BSP (M) outlet. IWC Rgr.: Secondary circuit: ½” BSP (M) inlet x F4 connection outlet. Primary circuit: ¾” BSP (M) inlet x ¾” BSP (M) outlet.

Marking:

Flow groups (IWC Fgr.): Grundfos part code, date of manufacture (DD/MM/YY hh:mm:ss), GRUNDFOS and QR code on adhesive label on body. Return groups (IWC Rgr.): Grundfos name and logo on pump. IWC Std.: Complete products will include the markings of the flow and return groups.

Installation Requirements:

R001 R008

Expiry date:

31/05/2029

Model:

IWC Std. UPM3/UPM4/UPS-xx CHB -xx pl xxx-xxxxxxxx The IWC Std. comprises of the following Flow and Return groups (available separately). IWC Fgr xxx-xxxxxxxx. IWC Rgr UPM3/UPM4-xx CHB xxx-xxxxxxxx. Where (as applicable): -xx = Pump max head. -xx pl = Plate heat exchanger number of plates (10-32). xxx-xxxxxxxx = Replaced by letters and/or numbers and do not have any bearing on water contact parts.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

‘Hydro MPC’ range of booster sets incorporating vertical multistage centrifugal pumps, butterfly valves, non-return valves (not suitable for backflow protection), pressure transmitters, pressure gauges, lever operated spherical valves, stainless steel blanking flanges and fibre/NBR gaskets. Maximum working pressure 16.0 bar. Cold water use only. ‘Hydro MPC’ range of booster sets incorporating vertical multistage centrifugal pumps, butterfly valves, non-return valves (not suitable for backflow protection), pressure transmitters, pressure gauges, lever operated spherical valves, stainless steel blanking flanges and fibre/NBR gaskets. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240707001

Note:

Approval doesn’t include pressure vessels.

Size:

Small Booster Sets Systems with 2 to 3 Pumps = 2” BSP (M), Systems with 4 to 6 pumps = 2½” BSP (M). Medium Booster Sets Systems with CRI(E)10 pumps: Systems with 2 to 3 pumps = 2½” BSP (M), Systems with 4 to 5 pumps = DN80 flanges, Systems with 6 pumps = DN100 flanges. Systems with CRI(E)15 and CRI(E)20 pumps: Systems with 2 pumps = DN80 flanges, Systems with 3 to 4 pumps = DN100 flanges, Systems with 5 to 6 pumps = DN150 flanges. Sizes added November 2024: Large Booster Sets Systems with CR(E)32 pumps: Systems with 2 pumps = DN100 flanges, Systems with 3 to 6 pumps = DN150 flanges. Systems with CR(E)45 and CR(E)64 pumps: Systems with 2 pumps = DN150 flanges, Systems with 3 to 6 pumps = DN200 flanges.

Marking:

Grundfos logo, model, serial number, P/N, manufacturing country and technical information on adhesive label on base frame.

Installation Requirements:

R001 R008 R415

Expiry date:

31/07/2029

Model:

Small Booster Sets (PN16): HYDRO MPC-E “X” CRIE3, HYDRO MPC-E “X” CRIE5, HYDRO MPC-F “X” CRI3, HYDRO MPC-F “X” CRI5, HYDRO MPC-S “X” CRI3, HYDRO MPC-S “X” CRI5. Medium Booster Sets (PN16): HYDRO MPC-E “X” CRIE10, HYDRO MPC-E “X” CRIE15, HYDRO MPC-E “X” CRIE20, HYDRO MPC-F “X” CRI10, HYDRO MPC-F “X” CRI15, HYDRO MPC-F “X” CRI20, HYDRO MPC-S “X” CRI10, HYDRO MPC-S “X” CRI15, HYDRO MPC-S “X” CRI20. Models added November 2024: Large Booster Sets (PN16): HYDRO MPC-E “X” CRE32, HYDRO MPC-E “X” CRE45, HYDRO MPC-E “X” CRE64, HYDRO MPC-F “X” CR32, HYDRO MPC-F “X” CR45, HYDRO MPC-F “X” CR64, HYDRO MPC-S “X” CR32, HYDRO MPC-S “X” CR45, HYDRO MPC-S “X” CR64. The “X” preceding CR indicates the number of pumps in the booster set, between 2 and 6 pumps. The number following the pump type designation (e.g.: 32, 45 and 64) indicates the flow rate of the pump in m³/h. Full code example: Hydro MPC-E 2 CRE32-2-U2D-A-A-GHJ Where: Hydro MPC = Product name. -E = System type; All pumps with E-motor or CUE, and can also be -F for Fixed-speed pumps, 1 CUE or -S for Fixed-speed pumps. 2 = Number of pumps, this can be any number between 2 and 6. CRE = Pump type, can also be pumps beginning CR, CRI or CRIE. 3, 5, 10, 15, 20, 32, 45, 64 = flow rate of the pump in m³/h. U2 = Voltage, can also be U1, U3, U4, U5, U6, U7, U8, U9, UA, UB, UC, UD or UX. D = Design, can also be A, B, C, E, F, G, H, I or W. -A = Starting method; E (speed control). -A = Material combination; Stainless steel manifold, base frame and standard valves. -HJ = Options;, H - Dry-running protection, J - Redundant sensor.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company