Grohe AG Approvals


#2309326

Range of deck mounted single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headwork, and single lever operating member. The spout outlet incorporates a plastic flow straightener and supplied with a flow regulator. Model 23.112 is supplied with a lever type pop-up waste (not tested). Maximum working pressure 10 bar. Maximum working temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2309326
Size:
Stainless steel braided PE-X lined flexible inlet hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Grohe on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/09/2028
Model:
Allure Brilliant ½” L-Size Range: 23.109.xxx - including pop-up waste set, 23.112.xxx – without pop-up waste set. XXX defines different available coloured finishes. 000 = chrome DC0 = supersteel AL0 = Brushed Hard Graphite A00 = Hard Graphite
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#240502011

Three hole, single outlet (swivel) combination tap assembly (brass body - various finishes), incorporating quarter turn ceramic disc headworks with dome type operating members. The spout outlets incorporate a plastic aerator. The product is supplied with stainless steel braided PEX lined flexible hose assemblies, for use between the valves and spout. Also supplied with a lever type pop up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
0660 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240502011
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP (M).
Marking:
GROHE SPA on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2029
Model:
20.595.xxx. Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit BE0 – polished nickel DL0 – brushed warm sunset EN0 – brushed nickel GN0 – brushed cool sunrise GL0 – cool sunrise
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2310301

Range of deck mounted single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork and a single lever operating member. The spout outlets incorporate a plastic aerator and some of the models are supplied with lever type pop-up wastes.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2310301
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies with 3/8” captive nut end connections.
Marking:
Grohe Spa on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2028
Model:
23.076 000 – Allure L size (without pop-up waste), 32.249 000 – Allure XL (with pop-up waste).
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2311345

Range of wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headworks, dome type operating member and an self-cancelling to the shower outlet. The temperature is controlled independently via a thermostatic cartridge, with manual override button. The spout outlets incorporate plastic aerators and the inlets incorporating stainless steel strainers. Both inlets and shower outlet incorporate approved check valve cartridges, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Shower hose and handset are not supplied with products. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2311345
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” x ¾” BSP (M) off-set union (34.567) or 3/4” BSP (F).
Marking:
Grohe on body.
Installation Requirements:
R001 R020
Expiry date:
30/11/2028
Model:
34.567 GROHTHERM 800, 34.568 GROHTHERM 800.

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2311346

Range of wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headworks, single lever operating member and an self-cancelling to the shower outlet. The spout outlets incorporate plastic aerators. Shower outlets incorporate approved check valve cartridges, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Shower hose and handset are not supplied with products. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2311346
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” x ½” offset unions
Marking:
Grohe, Design & Engineering, Grohe Germany etched on Lever & Rear of body.
Installation Requirements:
R001 R020
Expiry date:
30/11/2028
Model:
23.726.003 – EUROSTYLE, 32.286.001 - WAVE 2015, 33.591.XX3 – EUROSTYLE. XX indicates a different surface finish, like following 00 = chrome LS = moon white

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 25 of 29

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.