Shower kit, intended for use with ovens, incorporating a triple layered hose on a reel and a push-button operated shower handset. The inlet of the shower handset incorporates a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 4.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2012323

Expiry date:

31/12/2025

Size:

10mm spigot connection

Marking:

Fagor logo and model on hose reel cover.

Installation Requirements:

R001 R040

Model:

SWH

Manufacturer:

Fagor Industrial S Coop.

Company Name

Fagor Industrial S Coop.

Address

Barrio Sancholopetegui 22 20560 - Oñati

Phone

+34 943 71 80 30

View All Listings by this Company

‘Concept’ & ‘Advance’ ranges of atmospheric steaming ovens. The products incorporate a retractable triple layered hose on a reel and a push-button operated shower handset. The inlet of the shower handset incorporates a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection The water supply is controlled via a solenoid valve. The retractable hose has its own dedicated supply also controlled via a solenoid valve. The products are supplied with dual layer supply hoses (grey PVC outer layer/black PVC inner layer) with ¾” captive nut end connections, and chrome plated DZR brass ½” BSP (F) x ¾” BSP (M) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet. Maximum working pressure 4.0 bar. Cold supply only.

Section:

1690 Steaming Ovens

WRAS Approval Number:

2110369

Expiry date:

31/10/2026

Note:

Cleaning chemicals and detergents used in the automatic spray washing function must not represent a Fluid Category risk higher than Fluid Category 3. The Fluid Category of risk associated with the retractable hose and self-closing trigger supplied with this appliance can only be determine by the Water Regulations/Byelaws (Scotland) department of the local Water Supplier in the area of installation, which will require a site specific risk assessment. Under Regulation/Byelaw 3 and schedule 2 paragraph 15, the installer must ensure sufficient backflow protection is provided in line with the findings of the risk assessment. R008 applies to the solenoid inlet.

Size:

¾” BSP (M) (to solenoid)

Marking:

Fagor, Serial No., Model No., Ref No., manufacturing date (MM/YY) and other technical information on top panel. Fagor on front casing. Range name on front panel.

Installation Requirements:

R001 R008 R009 R160

Proviso:

Discharge to drain must be via a Type AA, AB or AD air gap or in accordance with EN 1717.

Model:

‘Concept’ & ‘Advance’ range: C-061-E-D, C-061-E-I, CW-061-E-D, CW-061-E-I, A-061-E-D, A-061-E-I, AW-061-E-D, AW-061-E-I, C-101-E-D, C-101-E-I, CW-101-E-I, CW-101-E-D, A-101-E-D, A-101-E-I, AW-101-E-D, AW-101-E-I, C-102-E-D, C-102-E-I, CW-102-E-D, CW-102-E-I, A-102-E-D, A-102-E-I, AW-102-E-D, AW-102-E-I, C-201-E, C-201-E-C, CW-201-E, CW-201-E-C, A-201-E, A-201-E-C, AW-201-E, AW-201-E-C, C-202-E, C-202-E-C, CW-202-E, CW-202-E-C, A-202-E, A-202-E-C, AW-202-E, AW-202-E-C, C-0623-E-D, CW-0623-E-D, A-0623-E-D, AW-0623-E-D, C-061-G-D, C-061-G-I, CW-061-G-D, CW-061-G-I, A-061-G-D, A-061-G-I, AW-061-G-D, AW-061-G-I, C-101-G-D, C-101-G-I, CW-101-G-D, CW-101-G-I, A-101-G-D, A-101-G-I, AW-101-G-D, AW-101-G-I, C-102-G-D, C-102-G-I, CW-102-G-D, CW-102-G-I, A-102-G-D, A-102-G-I, AW-102-G-D, AW-102-G-I, C-201-G, C-201-G-C, CW-201-G, CW-201-G-C, A-201-G, A-201-G-C, AW-201-G, AW-201-G-C, C-202-G, C-202-G-C, CW-202-G, CW-202-G-C, A-202-G, A-202-G-C, AW-202-G, AW-202-G-C, Where: C prefix = Concept models. A prefix = Advance models. E = Electric oven. G = Gas oven. W = Oven with automatic washing system. Numbers denote the capacity of the oven: 0623: 6 trays GN-2/3. 061: 6 trays GN-1/1 - 12 trays GN-1/2. 101: 10 trays GN-1/1 - 20 trays GN-1/2. 102: 10 trays GN-2/1 - 20 trays GN-1/1. 201: 20 trays GN-1/1 - 40 trays GN-1/2. 202: 20 trays GN-2/1 - 40 trays GN-1/1. I = Left door opening. R = Right door opening. C = Model with trolley.

Manufacturer:

Fagor Industrial S Coop.

Company Name

Fagor Industrial S Coop.

Address

Barrio Sancholopetegui 22 20560 - Oñati

Phone

+34 943 71 80 30

View All Listings by this Company