Eltek SpA Approvals


#1904501

'15.0903.01 & 15.0902.01'. Dark grey coloured, ferrite anisotropic magnets (commonly known as ceramic magnets). For use with water up to 85°C

Section:
5165 Magnetic Material
WRAS Approval Number:
1904501
Expiry date:
30/04/2024
Model:
Manufacturer:
Eltek SpA
Company Name
Eltek SpA
Address
Strada Valenza 5/A 15033 - Casale Monferrato (AL) Italy
Phone
+39 0142 335511

View All Listings by this Company

Print This Approval


#1912524

'TF25SOFT'. Black coloured, extruded PTFE bush component. For use with water up to 85°C.

Section:
5294 Polytetrafluoroethylene (PTFE)
Section Subtitle:
Components.
WRAS Approval Number:
1912524
Expiry date:
31/12/2024
Model:
Manufacturer:
Eltek SpA
Company Name
Eltek SpA
Address
Strada Valenza 5/A 15033 - Casale Monferrato (AL) Italy
Phone
+39 0142 335511

View All Listings by this Company

Print This Approval


#2001001

`Water block` self-closing valves with either a natural (white), blue or grey plastic body and a gear driven volume-controlled operation device. The product incorporates a combined EPDM washer and stainless steel strainer and EPDM ‘O’-rings. The product is designed to stop the flow of water once a preset value (in litres) has been reached. User intervention is then required to reset it. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2335 Valves
Section Subtitle:
Stop, plastic, self-closing.
WRAS Approval Number:
2001001
Expiry date:
31/01/2025
Note:
R008 only applies to the natural (white) body version. The self-closing function once a pre-set value has been reached has not been assessed and is not considered to be covered by the scope of this approval.
Size:
¾” BSP (F) inlet and ¾” BSP (M) outlet
Marking:
Minimum working flow rate, flow arrow, water bloc, Eltek and 100N/cm2
Installation Requirements:
R001 R008
Model:
100041xx Where ‘xx’ denotes the setting notches regulation and packaging type to either a ‘0’ or ‘9’.
Factor:
Eltek SpA
Company Name
Eltek SpA
Address
Strada Valenza 5/A 15033 - Casale Monferrato (AL) Italy
Phone
+39 0142 335511
General Email
salesdept@eltekgroup.it

View All Listings by this Company

Print This Approval


#2001004

`Water block` self-closing valve with magnetic scale inhibitor and grey plastic body and a gear driven volume-controlled operation device. The product incorporates a combined EPDM washer and stainless steel strainer and EPDM ‘O’-rings. The product is designed to stop the flow of water once a pre-set value (in litres) has been reached. User intervention is then required to reset it. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
WRAS Approval Number:
2001004
Expiry date:
31/01/2025
Note:
The self-closing function once a pre-set value has been reached has not been assessed and is not considered to be covered by the scope of this approval.
Size:
¾” BSP (F) inlet and ¾” BSP (M) outlet
Marking:
Eltek, water block, max flow rate and flow arrow on body.
Installation Requirements:
R001 R120 R150 R170 R290
Model:
101179xx The ‘x’ is replaced by a number ‘0’ to ‘9’ which denotes the setting notches regulation and packaging type.
Factor:
Eltek SpA
Company Name
Eltek SpA
Address
Strada Valenza 5/A 15033 - Casale Monferrato (AL) Italy
Phone
+39 0142 335511
General Email
salesdept@eltekgroup.it

View All Listings by this Company

Print This Approval


#2010024

Impeller with plastic body for insertion into specifically dimensioned bores. Maximum operating temperature 70°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2010024
Expiry date:
31/10/2025
Size:
20mm Ø
Marking:
Eltek Group on side of body.
Installation Requirements:
R001 R008
Model:
10102200
Manufacturer:
Eltek SpA
Company Name
Eltek SpA
Address
Strada Valenza 5/A 15033 - Casale Monferrato (AL) Italy
Phone
+39 0142 335511

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.