Range of commercial conveyor type dishwashers with the flow controlled by a solenoid valve and discharged via three type AB air gaps (pre-wash, rinse and wash) (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with a brass bodied ‘Y’-pattern strainer, brass adaptors ¾”x¾” (M)x(M) and (F)x(F) and dual layer PVC inlet hoes(s) (grey outer/black inner) and EPDM washers. The DR*11**** model has two solenoids and requires three inlet hoses and also includes a brass tee-piece to connect them ¾”x¾”x¾” (M). Maximum working pressure 6.0 bar. Maximum operating temperature 60ºC.

Section:

2390 Washing Machines

Section Subtitle:

Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2103015

Expiry date:

31/03/2026

Note:

This appliance incorporates a Fluid category 5 backflow prevention device.

Size:

¾” BSP (F) to ‘Y’-pattern strainer.

Marking:

Electrolux Professional SpA and product info on adhesive label on body.

Installation Requirements:

R001 R574

Model:

DR*10**** and DR*11**** Conveyor Dishwasher machine with AB airgaps Family type description: DR = Dual Rinse rack type dishwasher. 1st "*" = Length; 0 = 44", 1 = 66", 3 = 79". 2nd "*" = Rinsing type; 0 Line pressure (out of scope), 1= Air gap. 3rd "*" = Energy saving device; 0 = none, 1 = ESD. 4th "*" = Heaters power; 0 = 22kW, 1 = 24kW, 2 = 26kW, 3 = 29kW, 4 = 40kW, 5 = 20kW, 6 = 25kW, 7 = 39kW. 5th "*" = Heating type; 0 = electric. 6th "*"= PW Heating contemporaneity; 0 = no, 1 = 7kW. 7th "*" = Drying module; 0 = none, 1 = short, 2 = large, 3 = corner.

Manufacturer:

Electrolux Professional SpA

Company Name

Electrolux Professional SpA

Address

Via Segaluzza 30 33170 Pordenone Italy

View All Listings by this Company

Appliance inlet group assembly comprising of EPDM gaskets, a plastic bodied Y-pattern strainer, ¾” BSP (F) x ½” BSP (F) brass adaptor, a chrome plated DZR brass bodied double check valve assembly (suitable for backflow protection against Fluid Categry3), a ½” BSP (F) x ¾” BSP (M) brass adaptor, a dual layer hose with a PVC outer (grey) and PVC liner (black), a solenoid valve which incorporates a plastic strainer and a flow regulator within the inlet. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2107008

Expiry date:

31/07/2026

Size:

¾” BSP (F)

Marking:

Electrolux Professional S.p.a, models and WRAS approval number on label on hose.

Installation Requirements:

R001 R008

Model:

ED_DcV01

Manufacturer:

Electrolux Professional SpA

Company Name

Electrolux Professional SpA

Address

Via Segaluzza 30 33170 Pordenone Italy

View All Listings by this Company