Range of press fittings incorporating copper or copper alloy bodies and EPDM O’-rings for use with copper tube to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010316

Size:

See model.

Marking:

Conex logo >B< on body

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

Copper alloy: PIR4090G; - Threaded Elbow PIR4090G040400 – ½” x ½” BSP (M) PIR4090G060600 – ¾” x ¾” BSP (M) PIR4092G; - Press Elbow PIR4092G040400 – ½” x ½” BSP (M) PIR4092G060600 – ¾” x ¾” BSP (M) PIR4243G; - Male Adaptor PIR4243G040400 – ½” x ½” BSP (M) PIR4243G040600 – ½” x ¾” BSP (M) PIR4243G060400 – ¾” x ½” BSP (M) PIR4243G060600 – ¾” x ¾” BSP (M) PIR4243G080600 – 1” x ¾” BSP (M) PIR4243G080800 – 1” x 1” BSP (M) PIR4471G; - Female Wallplate Elbow PIR4471G040400 – ½” x ½” BSP (M) PIR4471G060600 – ¾” – ¾” BSP (M) PIR4473G; - Male Wall plate Elbow PIR4473G040400 – ½” BSP (M) PIR4270G; - Female Adaptor PIR4270G040400 – ½” x ½” BSP (M) PIR4270G060600 – ¾” x ¾” BSP (M) PIR4270G080800 – 1” x 1” BSP (M Copper: PIR5040; - 45° Street Elbow PIR5040 040000 – ½” BSP (M) PIR5040 060000 – ¾” BSP (M) PIR5040 080000 – 1” BSP (M) PIR5001; - 90° Street Bend PIR5001 040000 – ½” BSP (M) PIR5001 060000 – ¾” BSP (M) PIR5001 080000 – 1” BSP (M) PIR5240; - Reducing Coupler PIR5240 060400 – ¾” x ½” BSP (M) PIR5240 080400 – 1” x ½” BSP (M) PIR5240 080600 – 1” x ¾” BSP (M) PIR5130; - Tee Reduced PIR5130 060604 – ¾” x ¾” x ½” BSP (M) PIR5002; - 90° Bend PIR5002 040000 – ½” BSP (M) PIR5002 060000 – ¾” BSP (M) PIR5002 080000 – 1” V PIR5041; - 45° Elbow PIR5041 040000 – ½” BSP (M) PIR5041 060000 – ¾” BSP (M) PIR5041 080000 – 1” BSP (M) PIR5130; - Equal Tee PIR5130 040000 – ½” BSP (M) PIR5130 060000 – ¾” BSP (M) PIR5130 080000 – 1” BSP (M) PIR5270; - Coupler PIR5270 040000 – ½” BSP (M) PIR5270 060000 – ¾” BSP (M) PIR5270 080000 – 1” BSP (M) PIR5301; – Stop End PIR5301 040000 – ½” BSP (M) PIR5301 060000 – ¾” BSP (M) PIR5301 080000 – 1” BSP (M) PIR5130RB; - Tee Reduced Branch PIR5130 060406 – ¾” x ½” x ¾” BSP (M) PIR5130 080408 – 1” x ½” x 1” BSP (M) PIR5130 080608 – 1” x ¾” x 1” BSP (M) PIR5275; - Slip Coupler PIR5275 040000 – ½” BSP (M) PIR5275 060000 – ¾” BSP (M) PIR5275 080000 – 1” BSP (M) PIR5243; - Fitting Reducer PIR5243 060400 – ¾” x ½” BSP (M) PIR5243 080400 – 1” x ½” BSP (M) PIR5243 080600 – 1” x ¾” BSP (M) PIR5130REB - Tee Reduced End & Branch PIR5130 060404 – ¾” x ½” x ½” BSP (M) Models added February 2021: PIR5130 080806 – 1” X 1” X ¾” BSP (M) PIR5130 040604 – ½” X ¾” X ½” BSP (M) PIR5130 060806 – ¾“ X 1” X ¾” BSP (M) PIR5130 040804 – ½” X 1” X ½” BSP (M) PIR5130 080404 – 1” X ½” X ½” BSP (M) PIR5130 080604 – 1” X ¾” X ½” BSP (M) PIR5130 080406 – 1” X ½” X ¾” BSP (M)

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

IBP Atcosa SL

Company Name

IBP Atcosa SL

Address

General Email

View All Listings by this Company

Range of gate valves incorporating bronze bodies and wedges with PTFE seals. The valves are operated via a non-rising spindle with a hand wheel operating member. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

2010392

Size:

½” BSP (F) - 2” BSP (F).

Marking:

Size and PN20 on body. Conex Universal Ltd, PN20, MODEL, WRAS and other technical information on operating member.

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

2121

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Size:

1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)

Marking:

CONEX, size, pressure rating and flow arrow on body. WRAS, PRESSURE, PN ON DATAPLATE ON BODY

Installation Requirements:

R001

Expiry date:

31/08/2025

Model:

1804 `Y`-PATTERNED STRAINERS

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of crimp fittings with a bronze body incorporating EPDM O-rings. For use with copper pipe manufactured to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106010

Size:

See model.

Marking:

Conex Universal Limited logo: >B<, WRAS and size on fitting body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

HZ Valve adaptor: HZC625101: 15mm crimp joint X ½” BSP (M). HZC625102: 22mm crimp joint X ¾” BSP (M). HZC625103: 28mm crimp joint X 1” BSP (M). HZC625104: 35mm crimp joint X 1 ¼” BSP (M). HZC625105: 42mm crimp joint X 1 ½” BSP (M). HZC625106: 54mm crimp joint X 2” BSP (M).

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

IBP Instalfittings sp ZOO

Company Name

IBP Instalfittings sp ZOO

Address

General Email

View All Listings by this Company

Range of press fittings incorporating stainless steel bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2105311

Size:

See model

Marking:

PS24 fittings marked <A> (manufacturers logo) and size PS26 fittings marked >B< (manufacturers logo) and size Tube marking: <A> Press Inox = 304 >B< Press Inox = 316

Installation Requirements:

R001

Expiry date:

31/05/2026

Model:

PS24001 – 90˚Street Elbow PS24001 0150000 – 15MM PS24001 0180000 – 18MM PS24001 0220000 – 22MM PS24001 0280000 – 28MM PS24001 0350000 – 35MM PS24001 0420000 – 42MM PS24001 0540000 – 54MM PS24002 - 90˚Elbow PS24002 0150000 – 15MM PS24002 0180000 – 18MM PS24002 0220000 – 22MM PS24002 0280000 – 28MM PS24002 0350000 – 35MM PS24002 0420000 – 42MM PS24002 0540000 – 54MM PS24002G – CxFi 90˚ Swivel Connector PS24002G0150400 – 15 X ½” PS24002G0180400 – 18 X ½” PS24002G0220600 – 22 X ¾” PS24002G0280800 – 28 X 1” PS24002G0351000 – 35 X 1-1/4” PS24002G0421200 – 42 X 1-1/2” PS24002G0541600 – 54 X 2” PS24040 – 45˚ Obtuse Street Elbow PS24040 0150000 – 15MM PS24040 0180000 – 18MM PS24040 0220000 – 22MM PS24040 0280000 – 28MM PS24040 0350000 – 35MM PS24040 0420000 – 42MM PS24040 0540000 – 54MM PS24041 – 45˚Obtuse Elbow PS24041 0150000 – 15MM PS24041 0180000 – 18MM PS24041 0220000 – 22MM PS24041 0280000 – 28MM PS24041 0350000 – 35MM PS24041 0420000 – 42MM PS24041 0540000 – 54MM PS24092G – CxMi 90˚ Elbow PS24092G0150400 – 15 X ½” PS24092G0180400 – 18 X ½” PS24092G0220600 – 22 X ¾” PS24092G0280800 – 28 X 1” PS24092G0351000 – 35 X 1-1/4” PS24092G0421200 – 42 X 1-1/2” PS24092G0541600 – 54 X 2” PS24292 – Plug End PS24292 0150000 – 15MM PS24292 0220000 – 22MM PS24292 0280000 – 28MM PS24292 0350000 – 35MM PS24292 0420000 – 42MM PS24292 0540000 – 54MM PS24130 – Equal Tee PS24130 0151515 – 15MM PS24130 0181818 – 18MM PS24130 0222222 – 22MM PS24130 0282828 – 28MM PS24130 0353535 – 35MM PS24130 0424242 – 42MM PS24130 0545454 – 54MM PS24130RB – Reduced Branch Tee PS24130 0181518 – 18 X 15 X 18 PS24130 0221522 – 22 X 15 X 22 PS24130 0221822 – 22 X 18 X 22 PS24130 0281528 – 28 X 15 X 28 PS24130 0281828 – 28 X 18 X 28 PS24130 0282228 – 28 X 22 X 28 PS24130 0351535 – 35 X 15 X 35 PS24130 0351835 – 35 X 18 X 35 PS24130 0352235 – 35 X 22 X 35 PS24130 0352835 – 35 X 28 X 35 PS24130 0421542 – 42 X 15 X 42 PS24130 0422242 – 42 X 22 X 42 PS24130 0422842 – 42 X 28 X 42 PS24130 0423542 – 42 X 35 X 42 PS24130 0541554 – 54 X 15 X 54 PS24130 0542254 – 54 X 22 X 54 PS24130 0542854 – 54 X 28 X 54 PS24130 0543554 – 54 X 35 X 54 PS24130 0544254 – 54 X 42 X 54 PS24130G – C x C x Fi Branch Tee PS24130G0150415 – 15 X ½” X 15 PS24130G0180418 – 18 X ½” X 18 PS24130G0180618 – 18 X ¾” X 18 PS24130G0220422 – 22 X ½” X 22 PS24130G0220622 – 22 X ¾” X 22 PS24130G – C x C x Fi Branch Tee(CONT) PS24130G0280428 – 28 X ½” X 28 PS24130G0280628 – 28 X ¾” X 28 PS24130G0280828 – 28 X 1” X 35 PS24130G0350435 – 35 X ½” X 35 PS24130G0350635 – 35 X ¾” X 35 PS24130G0350835 – 35 X 1” X 35 PS24130G0351035 – 35 X 1/1-4” X 35 PS24130G0420442 – 42 X ½” X 42 PS24130G0420642 – 42 X ¾” X 42 PS24130G0420842 – 42 X 1”X 42 PS24130G0421242 – 42 X 1-1/2” X 42 PS24130G0540454 – 54 X ½” X 54 PS24130G0540654 – 54 X ¾” X 54 PS24130G0540854 – 54 X 1” X 54 PS24130G0541654 – 54 X 2” X 54 PS24133G – CxCxMi Branch Tee PS24133G0150315 – 15 X 3/8” X 15 PS24133G0150415 - 15 X ½” X 15 PS24133G0220622 – 22 X ¾” X 22 PS24133G0280828 – 28 X 1” X 28 PS24133G0351035 – 35 X 1-1/4” X 35 PS24230B – Wallplate Adaptor PS24230B0150000 – 15MM PS24230B0180000 – 18MM PS24230B0220000 – 22MM PS24230B0280000 – 28MM PS24230B0350000 – 35MM PS24230B0420000 – 42MM PS24355 – CxFi Flat Seal Face PS24355 0150400 – 15 X ½” PS24355 0180600 – 18 X ¾” PS24355 0220600 – 22 X ¾” PS24355 0220800 – 22 X 1” PS24355 0280800 – 28 X 1” PS24355 0351000 – 35 X 1-1/4” PS24355 0421200 – 42 X 1-1/2” PS24355 0541600 – 54 X 2” PS24243 – Fitting Reducer PS24243 0181500 – 18 X 15MM PS24243 0221500 – 22 X 15MM PS24243 0221800 – 22 X 18MM PS24243 0281500 – 28 X 15MM PS24243 0281800 – 28 X 18MM PS24243 0282200 – 28 X 22MM PS24243 0351500 – 35 X 15MM PS24243 0351800 – 35 X 18MM PS24243 0352200 – 35 X 22MM PS24243 0352800 – 35 X 28MM PS24243 0421500 – 42 X 15MM PS24243 – Fitting Reducer (CONT) PS24243 0422200 – 42 X 22MM PS24243 0422800 – 42 X 28MM PS24243 0423500 – 42 X 35MM PS24243 0541500 – 54 X 15MM PS24343 0542200 – 54 X 22MM PS24243 0542800 – 54 X 28MM PS24243 0543500 – 54 X 35MM PS24243 0544200 – 54 X 42MM PS24243G – CxMi Coupler PS24243G0150300 – 15 X 3/8” PS24243G0150400 – 15 X ½” PS24243G0150600 – 15 X ¾” PS24243G0180400 – 18 X ½” PS24243G0180600 – 18 X ¾” PS24243G0220400 – 22 X ½” PS24243G0220600 – 22 X ¾” PS24243G0220800 – 22 X 1” PS24243G0280600 – 28 X ¾” PS24243G0280800 – 28 X 1” PS24243G0281000 – 28 X 1-1/4” PS24243G0350800 – 35 X 1” PS24243G0351000 – 35 X 1-1/4” PS24243G0351200 – 35 X 1-1/2” PS24243G0421000 – 42 X 1-1/4” PS24243G0421200 – 42 X 1-1/2” PS24243G0541200 – 54 X 1-1/2” PS24243G0541600 – 54 X 2” PS24270 – Coupler PS24270 0150000 – 15MM PS24270 0180000 – 18MM PS24270 0220000 – 22MM PS24270 0280000 – 28MM PS24270 0350000 – 35MM PS24270 0420000 – 42MM PS24270 0540000 – 54MM PS24270G – CxFi Coupler PS24270G0150300 – 15 X 3/8” PS24270G0150400 – 15 X ½” PS24270G0150600 – 15 X ¾” PS24270G0180400 – 18 X ½” PS24270G0180600 – 18 X ¾” PS24270G0220400 – 22 X ½” PS24270G0220600 – 22 X ¾” PS24270G0220800 – 22 X 1” PS24270G0280600 - 28 X ¾” PS24270G0280800 – 28 X 1” PS24270G0281000 – 28 X 1-1/4” PS24270G0350800 – 35 X 1” PS24270G0351000 – 35 X 1-1/4” PS24270G0351200 – 35 X 1-1/2” PS24270G0421000 – 42 X 1-1/4” PS24270G0421200 – 42 X 1-1/2” PS24270G0541200 – 54 X 1-1/2” PS24270G0541600 – 54 X 2” PS24275 – Slip Coupler PS24275 0150000 – 15MM PS24275 0180000 – 18MM PS24275 0220000 – 22MM PS24275 0280000 – 28MM PS24275 0350000 – 35MM PS24275 0420000 – 42MM PS24275 0540000 – 54MM PS24301 – Cap End PS24301 0150000 – 15MM PS24301 0180000 – 18MM PS24301 0220000 – 22MM PS24301 0280000 – 28MM PS24301 0350000 – 35MM PS24301 0420000 – 42MM PS24301 0540000 – 54MM PS24340G – Female Thread Union PS24340G0150400 – 15 X ½” PS24340G0150600 – 15 X ¾” PS24340G0180400 – 18 X ½” PS24340G0220600 – 22 X ¾” PS24340G0220800 – 22 X 1” PS24340G0280800 – 28 X 1” PS24340G0281000 – 28 X 1-1/4” PS24340G0351000 – 35 X 1-1/4” PS24340G0421200 – 42 X 1-1/2” PS24340G0541600 – 54 X 2” PS24341G – Male Thread Union PS24341G0150400 – 15 X ½” PS24341G0150600 – 15 X ¾” PS24341G0180400 – 18 X ½” PS24341G0220600 – 22 X ¾” PS24341G0220800 – 22 X 1” PS24341G0280800 – 28 X 1” PS24341G0281000 – 28 X 1-1/4” PS24341G0351000 – 35 X 1-1/4” PS24341G0421200 – 42 X 1-1/2” PS24341G0541600 – 54 X 2” PS24356 – CxFi Union Spigot PS24356 0150400 – 15 X ½” PS24356 0150600 – 15 X ¾” PS24356 0220600 – 22 X ¾” PS24356 0220800 – 22 X 1” PS24356 0280800 – 28 X 1” PS24356 0281000 –28 X 1-1/4” PS24356 0351000 – 35 X 1-1/4” PS24356 0351200 – 35 X 1-1/2” PS24356 0421200 – 42 X 1-1/2” PS24356 0421600 – 42 X 2” PS24356 0541600 – 54 X 2” PS24471G - Wallplate Elbow PS24471G0150400 – 15 X ½” PS24471G0180400 – 18 X ½” PS24471G0220600 – 22 X ¾” PS26243 – Fitting Reducer (CONT) PS26243 0422200 – 42 X 22MM PS26243 0422800 – 42 X 28MM PS26243 0423500 – 42 X 35MM PS26243 0541500 – 54 X 15MM PS26343 0542200 – 54 X 22MM PS26243 0542800 – 54 X 28MM PS26243 0543500 – 54 X 35MM PS26243 0544200 – 54 X 42MM PS26243G – CxMi Coupler PS26243G0150300 – 15 X 3/8” PS26243G0150400 – 15 X ½” PS26243G0150600 – 15 X ¾” PS26243G0180400 – 18 X ½” PS26243G0180600 – 18 X ¾” PS26243G0220400 – 22 X ½” PS26243G0220600 – 22 X ¾” PS26243G0220800 – 22 X 1” PS26243G0280600 – 28 X ¾” PS26243G0280800 – 28 X 1” PS26243G0281000 – 28 X 1-1/4” PS26243G0350800 – 35 X 1” PS26243G0351000 – 35 X 1-1/4” PS26243G0351200 – 35 X 1-1/2” PS26243G0421000 – 42 X 1-1/4” PS26243G0421200 – 42 X 1-1/2” PS26243G0541200 – 54 X 1-1/2” PS26243G0541600 – 54 X 2” PS26270 – Coupler PS26270 0150000 – 15MM PS26270 0180000 – 18MM PS26270 0220000 – 22MM PS26270 0280000 – 28MM PS26270 0350000 – 35MM PS26270 0420000 – 42MM PS26270 0540000 – 54MM PS26270G – CxFi Coupler PS26270G0150300 – 15 X 3/8” PS26270G0150400 – 15 X ½” PS26270G0150600 – 15 X ¾” PS26270G0180400 – 18 X ½” PS26270G0180600 – 18 X ¾” PS26270G0220400 – 22 X ½” PS26270G0220600 – 22 X ¾” PS26270G0220800 – 22 X 1” PS26270G0280600 - 28 X ¾” PS26270G0280800 – 28 X 1” PS26270G0281000 – 28 X 1-1/4” PS26270G0350800 – 35 X 1” PS26270G0351000 – 35 X 1-1/4” PS26270G0351200 – 35 X 1-1/2” PS26270G0421000 – 42 X 1-1/4” PS26270G0421200 – 42 X 1-1/2” PS26270G0541200 – 54 X 1-1/2” PS26270G0541600 – 54 X 2” PS26275 – Slip Coupler PS26275 0150000 – 15MM PS26275 0180000 – 18MM PS26275 0220000 – 22MM PS26275 0280000 – 28MM PS26275 0350000 – 35MM PS26275 0420000 – 42MM PS26275 0540000 – 54MM PS26301 – Cap End PS26301 0150000 – 15MM PS26301 0180000 – 18MM PS26301 0220000 – 22MM PS26301 0280000 – 28MM PS26301 0350000 – 35MM PS26301 0420000 – 42MM PS26301 0540000 – 54MM PS26340G – Female Thread Union PS26340G0150400 – 15 X ½” PS26340G0150600 – 15 X ¾” PS26340G0180400 – 18 X ½” PS26340G0220600 – 22 X ¾” PS26340G0220800 – 22 X 1” PS26340G0280800 – 28 X 1” PS26340G0281000 – 28 X 1-1/4” PS26340G0351000 – 35 X 1-1/4” PS26340G0421200 – 42 X 1-1/2” PS26340G0541600 – 54 X 2” PS26341G – Male Thread Union PS26341G0150400 – 15 X ½” PS26341G0150600 – 15 X ¾” PS26341G0180400 – 18 X ½” PS26341G0220600 – 22 X ¾” PS26341G0220800 – 22 X 1” PS26341G0281000 – 28 X 1” PS26341G0281000 – 28 X 1-1/4” PS26341G0351000 – 35 X 1-1/4” PS26341G0421200 – 42 X 1-1/2” PS26341G0541600 – 54 X 2” PS26356 – CxFi Union Spigot PS26356 0150400 – 15 X ½” PS26356 0150600 – 15 X ¾” PS26356 0220600 – 22 X ¾” PS26356 0220800 – 22 X 1” PS26356 0280800 – 28 X 1” PS26356 0281000 –28 X 1-1/4” PS26356 0351000 – 35 X 1-1/4” PS26356 0351200 – 35 X 1-1/2” PS26356 0421200 – 42 X 1-1/2” PS26356 0421600 – 42 X 2” PS26356 0541600 – 54 X 2” PS26471G – Wallplate Elbow PS26471G0150400 – 15 X ½” PS26471G0180400 – 18 X ½” PS26471G0220600 – 22 X ¾” >A< Press Inox Tube 304 STAINLESS STEEL PSTUBE-304-15 15x1.0x6M PSTUBE-304-15T 15x0.6x6M TW PSTUBE-304-18 18x1.0x6M PSTUBE-304-18T 18x0.7x6M TW PSTUBE-304-22 22x1.2x6M PSTUBE-304-22T 22x0.7x6M TW PSTUBE-304-28 28x1.2x6M PSTUBE-304-28T 28x0.8x6M TW PSTUBE-304-35 35x1.5x6M PSTUBE-304-35T 35x1.0x6M TW PSTUBE-304-42 42x1.5x6M PSTUBE-304-42T 42x1.2x6M TW PSTUBE-304-54 54x1.5x6M PSTUBE-304-54T 54x1.2x6M TW >B< Press Inox Tube 316 STAINLESS STEEL PSTUBE-316-15 15x1.0x6M PSTUBE-316-18 18x1.0x6M PSTUBE-316-22 22x1.2x6M PSTUBE-316-28 28x1.2x6M PSTUBE-316-35 35x1.5x6M PSTUBE-316-42 42x1.5x6M PSTUBE-316-54 54x1.5x6M PS24 Fittings = 304 Fittings & PS26 Fittings = 316 PS24 Fittings = 304 Fittings, to be used with stainless steel 304 tube, compatible with stainless steel tube as per EN 10312 and EN 10.217-7 PS26 Fittings = 316 fittings, to be used with stainless steel 316 tube, compatible with stainless steel tube as per EN 10312 and EN 10.217-7

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

Ningbo IDC International Trading Co. Ltd.

Company Name

Ningbo IDC International Trading Co. Ltd.

Address

Floor 43, Building A, International Trade Center, Ningbo Chamber of Commerce, No. 558 of Taikangzhong Road, Yinzhou District, Ningbo

General Email

View All Listings by this Company