A.u.K. Müller GmbH & Co. KG Approvals

#2307325

Solenoid valve with a plastic body, EPDM diaphragm and ‘O’-rings. The inlet incorporates a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2307325
Size:
M32.
Marking:
A.u.K. Müller, A.u.K. Müller logo, size, pressure, date of manufacture (WW/YY) and other technical information on adhesive label on the body.
Installation Requirements:
R001 R008
Expiry date:
31/07/2028
Model:
50.007.805 (monostable) & 50.007.805 (bistable/latching).
Approval Holder:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company
Manufacturer:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

Print This Approval

#2311340

Range of plastic solenoid valves with an EPDM diaphragm and ‘O’-rings. The inlets incorporate a stainless-steel strainer (except for push fit inlet models). Push fit connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C. BS6920 70°C.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2311340
Size:
see model
Marking:
A. u. K. Müller GmbH & Co. KG logo and flow arrow on body. AuK Muller, model number, date of manufacture (MM/YY) and other technical informatrion on adhesive label on body.
Installation Requirements:
R001
Expiry date:
30/11/2028
Model:
51.005.125.xxx. Where xxx denotes inlet and outlet, and is replaced with: 001 = Inlet: Plug Ø 14,8mm and clamp x Outlet: Nozzle Ø 8,4mm with 1 ‘O’-ring. 002 = Inlet: Flange 11.07mm x Outlet: 6mm push fit. 003 = Inlet: Flange 11.07mm x Outlet: 8mm push fit. 004 = Inlet and outlet: 8mm push fit. 005 = Inlet and outlet: 6mm push fit. 006 = Inlet: Plug Ø 14,8mm and clamp/Outlet: Nozzle Ø 8,4mm with 2 ‘O’-rings. 008 = Inlet: Flange 11.07mm x Outlet: Nozzle Ø 8,4mm with 1 ‘O’-ring. 011 = Inlet: Plug Ø 14,8mm and clamp x Outlet: Nozzle Ø 8,4mm with 2 ‘O’-rings. 012 = Inlet: Flange 11.07mm x Outlet: Nozzle Ø 8,4mm with 2 ‘O’-rings. 022 = Inlet: Plug Ø 14,8mm and clamp x Outlet: 8mm push fit.
Approval Holder:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company
Manufacturer:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

Print This Approval

#2311363

Solenoid valve with a plastic body, EPDM diaphragm and ‘O’-rings. Maximum working pressure 8.0 bar. Can only be used with water at 70°C. BS6920 70°C.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
2311363
Size:
31 mm diameter (Push-in connector).
Marking:
A.u.K. Müller, model, voltage, power, orifice size, pressure rating article number, WRAS Approved Product logo and date of manufacture WW/YY on adhesive label on body.
Installation Requirements:
R001 R008
Expiry date:
30/11/2028
Model:
50.007.800.
Approval Holder:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company
Manufacturer:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

Print This Approval

#241004727

Range of monostable/normally closed pilot operated solenoid valves mounted in plastic bodies. Valve bodies can also be mounted together in multiples. Push-fit connections to be used with PTFE tube. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
241004727
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
4mm or 6mm Pushfit.
Marking:
A. u. K. Müller GmbH & Co. KG and logo, type, 6V, DN and pressure rating on adhesive label on body. A. u. K. Müller GmbH & Co. KG logo, CE and date clock month & year moulded on body.
Installation Requirements:
R001 R008
Expiry date:
31/10/2029
Model:
19.Y1Y2.Z1Z2Z3 - Miniature valve Y1 = Function (1 = Distribution / 2 = Collection) Y2 = Pilot valve orifice size in mm (0,5- 1,2) Z1 = number of connected housing units Z2 = inlet connection; 1 = Nozzle (tube) / 2 = nozzle (push-fit) / 3 = Push-Fit (4mm) / 4 = Push-Fit (6mm) / 9 = Combination of multiple housings with Inlet 1-4 Z3 = outlet type; 1 = Nozzle (tube) / 2 = nozzle (push-fit) / 3 = Push-Fit (4mm) / 4 = Push-Fit (6mm) / 9 = Combination of multiple housings with Inlet 1-4
Manufacturer:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Phone
+49 211 7391 0

View All Listings by this Company

Print This Approval

#250104703

Range of pumps with plastic bodies. Maximum working pressures: 41.007.400 model: 0.28 bar, 41.008.400 model: 0.38 bar. Maximum operating temperature 96°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250104703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
41.007.400: Ø12mm inlet/Ø9mm outlet. 41.008.400: Ø12mm inlet/Ø10mm outlet.
Marking:
A.u.K. Müller, model type, production date (WW/YY) and technical information on adhesive label on body.
Installation Requirements:
R001
Expiry date:
31/01/2030
Model:
41.007.400, 41.008.400.
Approval Holder:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company
Manufacturer:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

Print This Approval

#250404711

Range of normally closed (NC), solenoid valves with plastic bodies and EPDM diaphragm. Models with push-fit connections are for use with copper pipe (manufactured to EN 1057) and PTFE pipe. The products incorporate a plastic or stainless steel filter on the inlet, (except for models with swivel nut, push-fit and nozzle inlets, as well as the 44.007.126 and 01.021.126 models) . The 44.007.126 model incorporates a Y-pattern stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperatures: Cold water use only, 65°C or 90°C for models marked with ℗ - Please consult model section for further details.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
250404711
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
AuK Muller, type (model), voltage, maximum water temperature (Tm 23°C, 65°C or 90°C as appropriate), date of manufacture WW/YY on adhesive label on coil. AuK Muller logo, flow arrow, pressure rating and model moulded on body. Models suitable for 90°C are also marked with a ℗ on the base of the body.
Installation Requirements:
R001 R008
Expiry date:
30/04/2030
Model:
Cold water use only models: 01.007.115: Inlet: G 3/8” (M), 01.021.126: Inlet: G 1” (M). 65°C models: 01.007.111: Inlet: G 1/2” (M); G 3/8”(M); G 3/4” (M), 01.007.115: Inlet: G 3/4” (M), 01.007.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Push-Fit; Ø 8 Push-Fit, 44.007.126: Inlet: G 1/2” (M); G 3/4” (M), 29.007.215: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M), 01.010.115: Inlet: G 3/4" (M), 01.010.125: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Nozzle; 3/8” Push-Fit; G 3/4” (F) ; 3/4-11,5 NH (F); G 1/2” (F), 01.010.215: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.216: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.315: Inlet: G 3/4” (M), 01.010.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.415: Inlet: G 3/4” (M), 01.010.425: Inlet: G 3/4” (M), 29.010.226: Inlet: G 3/4” (M), 29.010.326: Inlet: G 3/4” (M), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); 3/4-11,5 NH (M), 01.013.215: Inlet: G 3/4” (M), 01.013.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.017.126: Inlet: G 3/4” (M, 15.017.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 15.017.425: Inlet: G 3/4” (M); 3/4-11,5 NH (M). 90°C models (marked with a ℗): 01.010.115: Inlet: G 1/2” (M); G 3/4 (M), 01.010.125: Inlet: G 3/4” (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F); G 1/2” (F), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F), 01.017.115: Inlet: G 3/4” (M), 01.017.126: Inlet: G 3/4” (M); 3/4-11,5 NH (M).
Approval Holder:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company
Manufacturer:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

Print This Approval

#250404715

Ranges of solenoid valves with plastic bodies and stainless steel strainer. Models with female connections incorporate a stainless steel threaded connector. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
250404715
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/8” BSP (M), 3/8” BSP (F), ½” BSP (M,) ½” BSP (F).
Marking:
AuK Muller logo, flow arrow, type and date clock (MM/YY) moulded on body. AuK Muller & logo, type, voltage, DN, pressure rating, B – (Bistable) and date of manufacture (WW/YY) on adhesive label on body.
Installation Requirements:
R001 R008
Expiry date:
30/04/2030
Model:
50.005.126
Approval Holder:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

Print This Approval

#250804705

Range of normally closed (monostable) and pulse controlled/latching (bistable) solenoid valves with plastic bodies and integral stainless steel strainers. 50.005.101 model can also be supplied with an integral plastic strainer. To be installed in specifically dimensioned bodies. The 50.005.101 model can be supplied with or without a brass adaptor. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C. 50.009.101 Bistable is for cold water use only.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
250804705
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
A.u.K. Müller logo and date MM/YY moulded on body. A.u.K. Müller, size, pressure and technical information on adhesive label on body.
Installation Requirements:
R001 R008
Expiry date:
31/08/2030
Model:
50.005.101 Monostable: M22x2. thread on valve housing, 50.005.101 Bistable: M22x2. thread on valve housing. 50.009.101 Monostable: M29x1.5 thread on valve housing, 50.009.101 Bistable: M29x1.5 thread on valve housing.
Approval Holder:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

Print This Approval

#251104703

Range of bistable solenoid valves incorporating a plastic body, EPDM diaphragm and ‘O’-rings. The 51.005.101 model incorporates a stainless-steel strainer on the inlet. Maximum operating pressures: 51.005.100: 5.0 bar, 51.005.101: 10.0 bar. Maximum operating temperature 70°C.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
251104703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
51.005.100: Ø 11.02mm, 51.005.101: Ø 17.1mm.
Marking:
A.u.K.Müller, model, voltage, size, pressure rating and date of manufacture (WW/YY) on adhesive label on body. A.u.K.Müller GmbH & Co. KG logo on body.
Installation Requirements:
R001 R008
Expiry date:
30/11/2030
Model:
51.005.100 (2/2-way solenoid valve, DN5; bistable), 51.005.101 (2/2-way solenoid valve, DN5; bistable).
Approval Holder:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

Print This Approval

#251104704

Pulse controlled/latching (bistable) solenoid valves with a plastic body and integral stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2240 Valves
Section Subtitle:
Solenoid, plastic.
WRAS Approval Number:
251104704
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
M 22x2.
Marking:
A.u.K.Müller, TYP, voltage, DN, pressure, date of manufacture (WW/YY) and B on adhesive label on body. A.u.K.Müller GmbH & Co. KG logo on body.
Installation Requirements:
R001 R008
Expiry date:
30/11/2030
Model:
50.005.100 (2/2-way solenoid valve, DN5; bistable)
Approval Holder:
A.u.K. Müller GmbH & Co. KG
Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 2 of 3

© WRAS 2026 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.