Arrow Valves Ltd Approvals


WRAS Approval Number: 1707367

Range of pressurisation units with flow controlled by a float operated valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Inlets incorporate stainless steel strainers, flow restrictors and spherical isolation valves. Maximum working pressure10.0 bar. For cold water use only.

  • Section: 1610 Pumps
  • Section Subtitle: Wholesome water use.
  • WRAS Approval Number: 1707367
  • Expiry date: 31/07/2022
  • Note: To supply non-wholesome water systems only
  • Size: 15mm compression 22mm compression
  • Marking: Arrow valves, model number, serial number and other tech info on Casing
  • Installation Requirements R001 R150 R574
  • Model
    Midi-fill Digital MFD15. Midi-fill Digital MFD22. Dose & Fill DF15. Dose & Fill DF22.
  • Manufacturer: Arrow Valves Ltd
    Company Name
    Arrow Valves Ltd
    Address
    York House Northbridge Road Berkhamsted
    Postcode
    HP4 1TA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705332

Break tank and booster set with flow controlled by a float operated valve that discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The inlet incorporates a stainless steel strainer, flow restrictor and a spherical isolation valve. Maximum working pressure10.0 bar. For cold water use only.

  • Section: 0009 Backflow Prevention Devices
  • Section Subtitle: SCHEDULE 2 - Section 6.2 - Type AB - Air gap with weir overflow.
  • WRAS Approval Number: 1705332
  • Expiry date: 31/05/2022
  • Note: This product has a fluid category 5 backflow prevention device built in. The water in the break tank is not considered wholesome.
  • Size: 15mm compression inlet.
  • Marking: Arrow Valves, Model number, Serial number and other tech info on casing.
  • Installation Requirements R001 R415 R574
  • Model
    BTMIDI-1, BTMIDI-2A.& BTMIDI-3A
  • Manufacturer: Arrow Valves Ltd
    Company Name
    Arrow Valves Ltd
    Address
    York House Northbridge Road Berkhamsted
    Postcode
    HP4 1TA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711048

Automated valve with a chromium plated brass body. The valve is designed to close in the event of excess flow of water to stop the flow in the event of a leak. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 1530 Miscellaneous Fittings
  • WRAS Approval Number: 1711048
  • Expiry date: 30/11/2022
  • Note: The regulator’s specification does not currently specify a suitable test to verify the effectiveness of this device as a shut-off valve, and therefore this product has not been assessed for this function.
  • Size: ¾” BSP (F) Inlet x ¾” BSP (M) Outlet
  • Marking: Name of manufacture (OMB) on body
  • Installation Requirements R001
  • Model
    AWS20FM - Automatic Waterstop Valve.
  • Factor: Arrow Valves Ltd
    Company Name
    Arrow Valves Ltd
    Address
    York House Northbridge Road Berkhamsted
    Postcode
    HP4 1TA
    View All Listings by this Company
  • Manufacturer: OMB Saleri S.p.A
    Company Name
    OMB Saleri S.p.A
    Address
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1801303

Type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5) incorporating a float operated valve controlling the flow & flexible connection hose (with isolation valve). Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 0009 Backflow Prevention Devices
  • Section Subtitle: SCHEDULE 2 - Section 6.2 - Type AB - Air gap with weir overflow.
  • WRAS Approval Number: 1801303
  • Expiry date: 31/01/2023
  • Size: 15mm push fit connection
  • Marking: Arrow logo, product code and manufacturers contact details on adhesive label on drip tray.
  • Installation Requirements R001 R390 R574
  • Model
    AB18
  • Manufacturer: Arrow Valves Ltd
    Company Name
    Arrow Valves Ltd
    Address
    York House Northbridge Road Berkhamsted
    Postcode
    HP4 1TA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1805034

‘Eco3T’ reduced pressure zone valve with DZR brass body. The valve incorporates two spring loaded check valves with stainless steel springs and NBR seals. The zone between the check valves incorporates a relief valve with a stainless steel spring and EPDM seat and test ports. Maximum working pressure 10 Bar. Maximum operating temperature 65°C

  • Section: 0016 Backflow Prevention Devices
  • Section Subtitle: SCHEDULE 2 -Section 6.2 Type BA - Verifiable backflow preventer with reduced pressure zone.
  • WRAS Approval Number: 1805034
  • Expiry date: 31/05/2023
  • Note: This product contains approved check valve cartridges, therefore the minimum test requirement for number two check valve is 0.005 bar in accordance with section 7.2.2 c of the AIM-08-01: https://www.wras.co.uk/downloads/public_area/publications/general/aim_rpz_issue_1_final_version_feb_08_180108.pdf/. The product includes an air break to drain.
  • Size: ½” BSP (M) inlet/outlet
  • Marking: Brandoni, Brandoni S.p.A logo, flow arrow, size, European product standard, acoustic group, pressure, model, DR, serial number on body.
  • Installation Requirements R001 R120 R415 R425
  • Model
    ECO3T.015.EN.UK
  • Factor: Arrow Valves Ltd
    Company Name
    Arrow Valves Ltd
    Address
    York House Northbridge Road Berkhamsted
    Postcode
    HP4 1TA
    View All Listings by this Company
  • Manufacturer: Brandoni S.p.A.
    Company Name
    Brandoni S.p.A.
    Address
    Via Novara, 199 28078 Romagnano Sesia (No) Italy
    Phone
    0039 0163 828 111
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804333

Range of bypass valve assemblies with DZR brass bodies, incorporating EPDM `O` rings and lever operated spherical valves. Between the two circuits a double check valve (suitable for backflow prevention against Fluid Category 3) is installed. Maximum working pressure 10.0 bar. Cold water supply only.

  • Section: 1530 Miscellaneous Fittings
  • WRAS Approval Number: 1804333
  • Expiry date: 30/04/2023
  • Size: see model
  • Marking: Arrow valves, flow arrow, size and other technical information on valve body
  • Installation Requirements R001 R415
  • Model
    Compression models: BPV22C, BPV28C, BPV35C, BPV42C & BPV54C. BSP (F) models: BPV20FP, BPV25FP, BPV32FP, BPV40FP & BPV50FP.
  • Manufacturer: Arrow Valves Ltd
    Company Name
    Arrow Valves Ltd
    Address
    York House Northbridge Road Berkhamsted
    Postcode
    HP4 1TA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812353

Range of pressurisation units with the flow controlled by a solenoid valve which is actuated via a pressure activated switch. The product incorporates a type BA, reduced pressure zone valve (suitable for backflow protection against Fluid Category 4). The inlets incorporate a Y-patterned strainer, pressure reducing valve (pre-set at 2.0 bar) and spherical valves. Maximum working pressure 10.0 bar. For cold water use only.

  • Section: 2345 Valves
  • Section Subtitle: Special combination assemblies.
  • WRAS Approval Number: 1812353
  • Expiry date: 31/12/2023
  • Note: This product contains approved check valve cartridges, therefore the minimum test requirement for number two check valve is 0.005 bar in accordance with section 7.2.2 c of the AIM-08-01: https://www.wras.co.uk/downloads/public_area/publications/general/aim_rpz_issue_1_final_version_feb_08_180108.pdf/. The product includes an air break to drain.
  • Size: Stainless steel braided EPDM lined hose assembly incorporating either 15mm (AFS15) or 22mm (AFS22) push-fit end connections.
  • Marking: Product name, Arrow Valves, logo and website on cabinet door.
  • Installation Requirements R001 R120 R415 R425
  • Model
    AFS15 & AFS22.
  • Manufacturer: Arrow Valves Ltd
    Company Name
    Arrow Valves Ltd
    Address
    York House Northbridge Road Berkhamsted
    Postcode
    HP4 1TA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812365

Range of double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass or chromium plated DZR brass body. Models ED15FM235BK, ED15FM235BL & ED15MM235 Incorporate a flow restrictor. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

  • Section: 0034 Backflow Prevention Devices
  • Section Subtitle: SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
  • WRAS Approval Number: 1812365
  • Expiry date: 31/12/2023
  • Size: ½” BSP & ¾” BSP (M).
  • Marking: Arrowvalves.co.uk, KIWA, ED235 and flow arrow on body.
  • Installation Requirements R001
  • Model
    ED15FM235, ED15MF235, ED15MM235, ED20FM235 & ED20MF235.
  • Manufacturer: Arrow Valves Ltd
    Company Name
    Arrow Valves Ltd
    Address
    York House Northbridge Road Berkhamsted
    Postcode
    HP4 1TA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1812363

Pent-A-Boost booster set incorporating a single stage pump set assembly and break cistern (incorporating an AF air gap arrangement) fed via a double check valve suitable for fluid category 3. Inlet level sensors control the water supply via solenoid valves with inline strainers fitted. The unit also incorporates an expansion vessel. Maximum working pressure 10 bar. Cold water use only.

  • Section: 1610 Pumps
  • Section Subtitle: Wholesome water use.
  • WRAS Approval Number: 1812363
  • Expiry date: 31/12/2023
  • Size: 1 ¼” BSP(M) x 1 ¼” BSP (M)
  • Marking: Arrow valves & Logo, Pent-A-Boost & Product Code on booster box.
  • Installation Requirements R001
  • Model
    Pent-A-Boost - BTAF5-8
  • Factor: Arrow Valves Ltd
    Company Name
    Arrow Valves Ltd
    Address
    York House Northbridge Road Berkhamsted
    Postcode
    HP4 1TA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904325

Stand pipe arrangement incorporating an inline spherical valve, Y-pattern strainer connected to a RPZ valve via flexible stainless steel braided hose with a spherical valve at the outlet which requires a key to operate. The product is encased within a steel housing. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 2260 Valves
  • Section Subtitle: Spherical, metal.
  • WRAS Approval Number: 1904325
  • Expiry date: 30/04/2024
  • Note: When IRN R430 is applied and the product is insulated, the insulation must not hamper the visibility of the discharge from the relief port.
  • Size: 20mm, 25mm, 32mm compression.
  • Marking: Arrow Valves Ltd logo, model no., contact and website information on adhesive label on post.
  • Installation Requirements R001 R415 R425 R430
  • Model
    SPBA15X20, SPBA15X25, SPBA20X25, SPBA20X32. Where the first number refers to the outlet: ½” (15) or ¾” (20), and the second number is the coupling size in mm that accepts the supply pipe (MDPE - not supplied).
  • Manufacturer: Arrow Valves Ltd
    Company Name
    Arrow Valves Ltd
    Address
    York House Northbridge Road Berkhamsted
    Postcode
    HP4 1TA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1906374

Range of single check valve assemblies with DZR brass Tee shaped bodies. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C

  • Section: 0030 Backflow Prevention Devices
  • Section Subtitle: SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
  • WRAS Approval Number: 1906374
  • Expiry date: 30/06/2024
  • Size: See model
  • Marking: EB15FM235 & EB15MF235 models: Barberi Rubinetterie Industrali s.r.l logo (‘B’ within a hexagon), flow arrow & CR mark on body. EB20FM235 & EB20MF235 models: www.arrowvalves.co.uk, flow arrow & CR mark on body
  • Installation Requirements R001
  • Model
    EB15FM235: ½” BSP (F) x ½” BSP (M). EB15MF235: ½” BSP (M) x ½” BSP (F). EB20FM235: ¾” BSP (F) x ¾” BSP (M). EB20MF235: ¾” BSP (M) x ¾” BSP (F).
  • Factor: Arrow Valves Ltd
    Company Name
    Arrow Valves Ltd
    Address
    York House Northbridge Road Berkhamsted
    Postcode
    HP4 1TA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2004800

Range of below ground hose union taps within a chamber incorporating a brass spherical valves, hose connector and MDPE couplings. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C

  • Section: 1530 Miscellaneous Fittings
  • WRAS Approval Number: 2004800
  • Expiry date: 30/04/2025
  • Size: see model
  • Marking: Arrow Valves on adhesive label on top of body
  • Installation Requirements R001 R090
  • Model
    HUBG 15mm x 20mm HUBG 15mm x 25mm HUBG 20mm x 25mm HUBG 20mm x 32mm
  • Manufacturer: Arrow Valves Ltd
    Company Name
    Arrow Valves Ltd
    Address
    York House Northbridge Road Berkhamsted
    Postcode
    HP4 1TA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2003373

‘Boost a Break’ range of break tank and booster sets incorporating a solenoid valve controlling the flow, polypropylene tank and pump having a single check valve cartridge at the inlet (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection). The pump sets have various flow rates and pressures depending in installation requirements. The tank incorporates a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 0009 Backflow Prevention Devices
  • Section Subtitle: SCHEDULE 2 - Section 6.2 - Type AB - Air gap with weir overflow.
  • WRAS Approval Number: 2003373
  • Expiry date: 31/03/2025
  • Note: Non wholesome water use only.
  • Size: Stainless steel braided EPDM lined flexible hose with 1 ¼” captive nut end connections.
  • Marking: Arrow valves, model, serial no, Boost a Break & other technical information, www.arrowvalves.co.uk on control unit.
  • Installation Requirements R001 R415 R574
  • Model
    Single Pump, Single filling Solenoid BTAB3-5 - 2.0 bar BTAB3-7 - 3.0 bar BTAB3-10 - 4.0 bar BTAB1-5 - 5.0 bar BTAB1-6 - 6.0 bar BTAB1-7 - 7.0 bar BTAB1-8 - 8.0 bar BTAB1-9 - 9.0 bar BTAB1-10 - 10.0 bar BTAB5-4 - 1.5 bar Single Pump, two filling solenoids BTAB5-8 - 3.0 bar BTAB5-10 - 4.0 bar BTAB2-5 - 5.0 bar BTAB5-16 - 6.0 bar BTAB2-7 - 7.0 bar BTAB2-8 - 8.0 bar Dual pump, 24 litre break tank (up to 2.0 lt/s) BTAB3-7S - 3.0 bar BTAB3-10S - 4.0 bar BTAB3-5A - 2.0 bar BTAB5-4S - 1.5 bar BTAB5-8S - 3.0 bar BTAB3-7A - 3.0 bar BTAB3-10A - 4.0 bar Dual pump, 100 litre break tank (3.0 lt/s) BTAB5-8A - 3.0 bar Models added May 2020: BTAB700 2.0 bar BTAB900 3.0 bar BTAB1200 4.0 bar BTAB4-2 1.0 bar BTAB4-3 2.0 bar BTAB4-4 3.0 bar
  • Manufacturer: Arrow Valves Ltd
    Company Name
    Arrow Valves Ltd
    Address
    York House Northbridge Road Berkhamsted
    Postcode
    HP4 1TA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2006320

In-wall concealed, manually accessible and operated hose connector incorporating a brass body, quarter turn ceramic disc headwork and operated by removable key. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 1535 Miscellaneous
  • Section Subtitle: Tap accessories.
  • WRAS Approval Number: 2006320
  • Expiry date: 30/06/2025
  • Size: 15mm copper tail
  • Marking: Product name (Conceal-A-Tap) and manufacturers logo on s/s disc.
  • Installation Requirements R001 R040
  • Model
    Conceal-A-Tap HUC15
  • Manufacturer: Arrow Valves Ltd
    Company Name
    Arrow Valves Ltd
    Address
    York House Northbridge Road Berkhamsted
    Postcode
    HP4 1TA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2005341

Pent-A-Boost domestic break tank and booster set incorporating a single or dual pump stage pump set assembly and break cistern (incorporating an AG air gap arrangement). Inlet level sensors control the water supply via solenoid valves with inline strainers fitted (see manufacturers data sheet for optional arrangements). The unit also incorporates an expansion vessel. Flow from the break tank is via a single check valve suitable for fluid category 2 to a booster pump arrangement (see manufacturers data sheet for optional arrangements). Maximum working pressure 10 bar. Cold water use only.

  • Section: 1610 Pumps
  • Section Subtitle: Wholesome water use.
  • WRAS Approval Number: 2005341
  • Expiry date: 31/05/2025
  • Size: See model
  • Marking: Pent-a-boost, arrow valves, contact details, serial no, product code and other technical information on control box.
  • Installation Requirements R001 R415
  • Model
    Single Pump, Single Filling Solenoid - Inlet ¾” BSP (F) S/S Hose captive nut x ¾” BSP (F) S/S Hose captive nut: BTAF3-5 BTAF3-7 BTAF3-10 BTAF1-5 BTAF1-6 BTAF1-7 BTAF1-8 BTAF1-9 BTAF1-10 Single Pump, Two Filling Solenoids – Inlet 1 ¼” x 1” Reducing nipple: BTAF5-4 BTAF5-10 BTAF2-5 BTAF5-16 BTAF2-7 BTAF2-8 Dual Pump, 24 Litre Break Tank (up to 2.0 Lt/s) – Inlet 1 ¼” x 1” Reducing Nipple: BTAF3-7S BTAF3-10S BTAF5-4S BTAF5-8S BTAF3-5A BTAF3-7A BTAF3-10A Dual Pump, 100 Litre Break Tank (3.0 Lt/s) – Inlet 1” FxF Elbow: BTAF5-8A
  • Manufacturer: Arrow Valves Ltd
    Company Name
    Arrow Valves Ltd
    Address
    York House Northbridge Road Berkhamsted
    Postcode
    HP4 1TA
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 2105320

Standpipe assembly break tank with a Type ‘AB’ air gap (verified by test – suitable for backflow protection against fluid category 5) mounted to the top of the standpipe body. The tank is filled via a compact float valve and has two screened weir slots. Water is then supplied by gravity from the break tank to the hose outlet below. Flow is activated via a spherical valve located behind a lockable panel. In addition to the isolation valve, the product incorporates a single check valve assembly (suitable for backflow protection against Fluid Category 2) prior to the spherical valve and an in-line ‘Y’ pattern strainer after it. The spherical valve includes a drain plug to allow for draining. Insulation is provided up to the drain point. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 0009 Backflow Prevention Devices
  • Section Subtitle: SCHEDULE 2 - Section 6.2 - Type AB - Air gap with weir overflow.
  • WRAS Approval Number: 2105320
  • Expiry date: 31/05/2026
  • Note: The MDPE pipe manufactured to BS EN 12201-2:2011 noted under size is not supplied or included under the scope of this approval.
  • Size: 20mm, 25mm or 32mm compression (for use with MDPE pipe manufactured to BS EN 12201-2:2011 only).
  • Marking: Arrow valve, product code, manuafcturers website and tel no. on adhesive label on front cover.
  • Installation Requirements R001 R415 R430 R511
  • Model
    SPFC5X20, SPFC5X25, SPFC5X32.
  • Manufacturer: Arrow Valves Ltd
    Company Name
    Arrow Valves Ltd
    Address
    York House Northbridge Road Berkhamsted
    Postcode
    HP4 1TA
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1