Arrow Valves Ltd Approvals


#1904325

Stand pipe arrangement incorporating an inline spherical valve, Y-pattern strainer connected to a RPZ valve via flexible stainless steel braided hose with a spherical valve at the outlet which requires a key to operate. The product is encased within a steel housing. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
1904325
Expiry date:
30/04/2024
Note:
When IRN R430 is applied and the product is insulated, the insulation must not hamper the visibility of the discharge from the relief port.
Size:
20mm, 25mm, 32mm compression.
Marking:
Arrow Valves Ltd logo, model no., contact and website information on adhesive label on post.
Installation Requirements:
R001 R415 R425 R430
Model:
SPBA15X20, SPBA15X25, SPBA20X25, SPBA20X32. Where the first number refers to the outlet: ½” (15) or ¾” (20), and the second number is the coupling size in mm that accepts the supply pipe (MDPE - not supplied).
Manufacturer:
Arrow Valves Ltd
Company Name
Arrow Valves Ltd
Address
York House Northbridge Road Berkhamsted Hertfordshire
Postcode
HP4 1TA
Phone
01442 823 123

View All Listings by this Company

Print This Approval


#1906374

Range of single check valve assemblies with DZR brass Tee shaped bodies. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
1906374
Expiry date:
30/06/2024
Size:
See model
Marking:
EB15FM235 & EB15MF235 models: Barberi Rubinetterie Industrali s.r.l logo (‘B’ within a hexagon), flow arrow & CR mark on body. EB20FM235 & EB20MF235 models: www.arrowvalves.co.uk, flow arrow & CR mark on body
Installation Requirements:
R001
Model:
EB15FM235: ½” BSP (F) x ½” BSP (M). EB15MF235: ½” BSP (M) x ½” BSP (F). EB20FM235: ¾” BSP (F) x ¾” BSP (M). EB20MF235: ¾” BSP (M) x ¾” BSP (F).
Factor:
Arrow Valves Ltd
Company Name
Arrow Valves Ltd
Address
York House Northbridge Road Berkhamsted Hertfordshire
Postcode
HP4 1TA
Phone
01442 823 123
General Email
enquiries@arrowvalves.co.uk

View All Listings by this Company

Print This Approval


#2004800

Range of below ground hose union taps within a chamber incorporating a brass spherical valves, hose connector and MDPE couplings. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2004800
Expiry date:
30/04/2025
Size:
see model
Marking:
Arrow Valves on adhesive label on top of body
Installation Requirements:
R001 R090
Model:
HUBG 15mm x 20mm HUBG 15mm x 25mm HUBG 20mm x 25mm HUBG 20mm x 32mm
Manufacturer:
Arrow Valves Ltd
Company Name
Arrow Valves Ltd
Address
York House Northbridge Road Berkhamsted Hertfordshire
Postcode
HP4 1TA
Phone
01442 823 123

View All Listings by this Company

Print This Approval


#2003373

‘Boost a Break’ range of break tank and booster sets incorporating a solenoid valve controlling the flow, polypropylene tank and pump having a single check valve cartridge at the inlet (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection). The pump sets have various flow rates and pressures depending in installation requirements. The tank incorporates a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 10.0 bar. Cold water use only.

Section:
0009 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 - Type AB - Air gap with weir overflow.
WRAS Approval Number:
2003373
Expiry date:
31/03/2025
Note:
Non wholesome water use only.
Size:
Stainless steel braided EPDM lined flexible hose with 1 ¼” captive nut end connections.
Marking:
Arrow valves, model, serial no, Boost a Break & other technical information, www.arrowvalves.co.uk on control unit.
Installation Requirements:
R001 R415 R574
Model:
Single Pump, Single filling Solenoid BTAB3-5 - 2.0 bar BTAB3-7 - 3.0 bar BTAB3-10 - 4.0 bar BTAB1-5 - 5.0 bar BTAB1-6 - 6.0 bar BTAB1-7 - 7.0 bar BTAB1-8 - 8.0 bar BTAB1-9 - 9.0 bar BTAB1-10 - 10.0 bar BTAB5-4 - 1.5 bar Single Pump, two filling solenoids BTAB5-8 - 3.0 bar BTAB5-10 - 4.0 bar BTAB2-5 - 5.0 bar BTAB5-16 - 6.0 bar BTAB2-7 - 7.0 bar BTAB2-8 - 8.0 bar Dual pump, 24 litre break tank (up to 2.0 lt/s) BTAB3-7S - 3.0 bar BTAB3-10S - 4.0 bar BTAB3-5A - 2.0 bar BTAB5-4S - 1.5 bar BTAB5-8S - 3.0 bar BTAB3-7A - 3.0 bar BTAB3-10A - 4.0 bar Dual pump, 100 litre break tank (3.0 lt/s) BTAB5-8A - 3.0 bar Models added May 2020: BTAB700 2.0 bar BTAB900 3.0 bar BTAB1200 4.0 bar BTAB4-2 1.0 bar BTAB4-3 2.0 bar BTAB4-4 3.0 bar
Manufacturer:
Arrow Valves Ltd
Company Name
Arrow Valves Ltd
Address
York House Northbridge Road Berkhamsted Hertfordshire
Postcode
HP4 1TA
Phone
01442 823 123

View All Listings by this Company

Print This Approval


#2006320

In-wall concealed, manually accessible and operated hose connector incorporating a brass body, quarter turn ceramic disc headwork and operated by removable key. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
2006320
Expiry date:
30/06/2025
Size:
15mm copper tail
Marking:
Product name (Conceal-A-Tap) and manufacturers logo on s/s disc.
Installation Requirements:
R001 R040
Model:
Conceal-A-Tap HUC15
Manufacturer:
Arrow Valves Ltd
Company Name
Arrow Valves Ltd
Address
York House Northbridge Road Berkhamsted Hertfordshire
Postcode
HP4 1TA
Phone
01442 823 123

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.