Range of single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members. The spout outlet incorporates a plastic flow straightener. Model B9868AA is supplied with a pop-up waste and a weighted chain. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001079

Expiry date:

31/01/2025

Note:

No testing preformed on the pop-up waste

Size:

Stainless steel braided EDPM lined hose assembly incorporating 15mm compression end connections

Marking:

ISI on rear of tap body + Armitage Shanks on operating member screw caps

Installation Requirements:

R001 R006 R010

Model:

B9867AA Sandringham 21 B9868AA Sandringham 21 B9869AA Sandringham 21

Factor:

Armitage Shanks

Company Name

Armitage Shanks

Address

Old Road (Lodge 1), Armitage, Rugeley

Postcode

WS15 4BT

Phone

+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Concealed, wall mounted, thermostatic blending valve (brass body) with chromium plated trim set incorporating a single sequential headwork controlling flow and temperature with a single lever operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with an optional 15mm compression isolation valve for each inlet. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2003002

Expiry date:

31/03/2025

Size:

15mm Compression.

Marking:

Armitage shanks on operating member.

Installation Requirements:

R001 R010 R040

Model:

A4314MY Thermostatic shower E4705AA Shower elbow

Factor:

Armitage Shanks

Company Name

Armitage Shanks

Address

Old Road (Lodge 1), Armitage, Rugeley

Postcode

WS15 4BT

Phone

+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Two-hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn non rising spindle headworks with single lever operating members. The spout outlet incorporates a metal flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2004009

Expiry date:

30/04/2025

Size:

½” BSP (M)

Marking:

Armitage Shanks on indice

Installation Requirements:

R001 R006 R010

Model:

S8207AA Markwik

Factor:

Armitage Shanks

Company Name

Armitage Shanks

Address

Old Road (Lodge 1), Armitage, Rugeley

Postcode

WS15 4BT

Phone

+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Range of infra-red controlled urinal flush valves and link box, incorporating a stainless-steel strainer, flow straightener. The unit comprises a normally closed solenoid valve and an infra-red sensor. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1307 Flushing Mechanisms

Section Subtitle:

Urinals.

WRAS Approval Number:

2005027

Expiry date:

31/05/2025

Size:

½” BSP Female inlet/outlet

Marking:

Armitage shanks on panel. Flow arrow on body.

Installation Requirements:

R001 R075 R120 R165

Model:

Sensorflow 21 A4188XJ, A4189XJ & A4187XJ

Factor:

Armitage Shanks

Company Name

Armitage Shanks

Address

Old Road (Lodge 1), Armitage, Rugeley

Postcode

WS15 4BT

Phone

+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company