Aqualisa Products Ltd. Approvals


#2301085

Range of shower handsets with a chromium plated plastic body.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2301085
Note:
Open outlet use only.
Size:
½” BSP (M).
Marking:
Aqualisa on handset
Installation Requirements:
R001 R040
Expiry date:
31/01/2028
Model:
ACY2005 MIAN SQUARE SHOWER HANDSET

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2305047

Deck mounted, two hole, fixed, thermostatic bath/shower mixer valve (chromium plated brass body) incorporating a manual diverter with a single lever operating member controlling the flow between the bath and shower outlets. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge, however, it has not been fully tested to demonstrate it provides adequate backflow protection. The spout outlet incorporates a flow straightener. Supplied with hose and handset. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
2305047
Size:
¾” BSP (M).
Marking:
Aqualisa logo on body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2028
Model:
300BSM
Product Images

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2305049

Range of wall mounted outlet brackets, (brass bodies - various finishes).Open outlet use only.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2305049
Size:
½” BSP (M)
Marking:
AQUALISA on faceplate on model 706436, ELISA on faceplate on all other models.
Installation Requirements:
R001 R040
Expiry date:
31/05/2028
Model:
706352 706353 706354 706355 706436
Product Images

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company
Manufacturer:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2304357

Range of two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass bodies) incorporating quarter turn ceramic disc headworks with dome type operating members and a manually operated diverter to the shower outlet. The spout outlets incorporate plastic flow straighteners. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
2304357
Size:
¾” BSP (M)
Marking:
Aqualisa on body
Installation Requirements:
R001 R005 R020
Expiry date:
30/04/2028
Model:
CT.BSMT.CH Aqualisa Central Chrome Bath Shower Mixer Tap

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2211360

Two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating member and a manual diverter to shower outlet. The spout outlets incorporates a plastic flow straightener and a NBR washer with a stainless steel strainer. The product is also supplied with a shower hose, handset and metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
2211360
Size:
¾” BSP (M).
Marking:
Aqualisa on tap body.
Installation Requirements:
R001 R006 R020
Expiry date:
30/11/2027
Model:
CB.BSMT.20 Bath Shower Mixer Tap LP/HP Chrome

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2207083

Range of wall mounted thermostatic shower valves (chrome plated brass). Flow is controlled by a ceramic disc diverter cartridge, using dome type operating members. Temperature is controlled independently via a thermostatic cartridge using a dome type operating member which also incorporates a manual override button. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2207083
Note:
This approval does not include a shower hose or handset
Size:
¾” x ½” BSP (M) offset unions
Marking:
Aqualisa on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2027
Model:
Midas 220 Column Valve body

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2306074

Range of overhead shower outlets with brass or stainless-steel bodies (various finishes - see model), with NBR ‘O’-rings. The inlet incorporates a stainless-steel strainer.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2306074
Note:
Open outlet use only.
Size:
½” BSP (F).
Marking:
Elisa on Connector
Installation Requirements:
R001 R040
Expiry date:
30/06/2028
Model:
706760 Chrome (12” circle stainless steel shower head), 706339 Matt Black (12” circle stainless steel shower head), 706340 Brushed Black (12” circle stainless steel shower head), 706341 Chrome (12” square stainless steel shower head), 706342 Matt Black (12” square stainless steel shower head), 706343 Brushed Black (12” square stainless steel shower head),

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2306075

Range of overhead shower outlets with brass or stainless-steel bodies (various finishes - see model), with NBR ‘O’-rings. The inlet incorporates a stainless-steel strainer.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2306075
Note:
Open outlet use only.
Size:
½” BSP (F).
Marking:
Elisa on Connector
Installation Requirements:
R001 R040
Expiry date:
30/06/2028
Model:
706344 Chrome (16” circle stainless steel shower head), 706345 Matt Black (16” circle stainless steel shower head), 706346 Brushed Brass (16” circle stainless steel shower head), 706347 Chrome (16” square stainless steel shower head), 706348 Matt Black (16” square stainless steel shower head), 706349 Brushed Black (16” square stainless steel shower head),

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2105326

Range of overhead shower outlets (chrome plated plastic bodies). Inlets incorporate a strainer. Maximum operating temperature 85°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2105326
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
Aqualisa on body
Installation Requirements:
R001 R040
Expiry date:
31/05/2026
Model:
707553 200mm Fixed Head Chrome Square

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2304362

Wall mounted, concealed, thermostatic shower valve incorporating ceramic disc diverter headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge, with dome operating members that also incorporate a manual override button. The inlets incorporate a stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2304362
Size:
15mm compression
Marking:
Aqualisa on valve body and faceplate.
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2028
Model:
SDCV.002

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 7 of 13

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.