Section Code 5360 : Ethylene Propylene Diene Monomer (EPDM) - components.
Back To Directory Sections'EPDM 5518 Seal 3G'. Black coloured, compression moulded, EPDM rubber seal. Shore hardness 58. Tested in-radius size 1.92mm. For use with water up to 23°C.
'EPDM EJ820-70 type 1 and type 2 seals'. Black coloured, injection moulded EPDM rubber seals. Shore hardness 70. The Type 2 seal has an in-radius of 0.77mm and the Type 1 seal has an in-radius of 3.77mm. For use with water up to 85°C.
'EP11/7/4 BLK'. Black coloured, injection moulded EPDM rubber `O` rings & gaskets. Shore hardness 70. The ‘O’-rings have a tested in-radius size of 1.5mm. The gaskets have a tested in-radius size of 1.4mm. For use with water up to 85°C.
'ME0940 'O' rings'. Black coloured, injection moulded EPDM rubber 'O' rings. Shore hardness between 40 & 90. Tested in-radii sizes between 1.0mm & 4.91mm. For use with water up to 85°C.
'EP7/3/7 BLK O-rings & gaskets'. Black coloured, injection moulded EPDM 'O' rings and gaskets. Shore hardness 75. The gaskets have an in-radius size of 1.0mm. The 'O' rings have an in-radius size of 1.3mm. For use with water up to 85°C.
'Corirubber 4070 gaskets'. Black coloured, compression moulded EPDM rubber gaskets. Shore hardness 70. Tested in-radius size between 1.56mm & 3.95mm. For use with water up to 60°C.
'E23 type 1 and type 2 seals'. Black coloured, injection moulded EPDM rubber seals. Shore hardness 70. The Type 2 seal has an in-radius of 0.77mm and the Type 1 seal has an in-radius of 3.77mm. For use with water up to 85°C.
'85 EPDM 282'. Black coloured, injection moulded EPDM 'O' rings & gaskets. Shore hardness 85. The ‘O’ rings have a tested in-radius size of 1.39mm and the gaskets have a tested in-radius size of 0.78mm. For use with water up to 85°C
‘Timo 3-60 ‘O’ rings and gaskets’. Black coloured, injection moulded EPDM ‘O’ rings and gaskets. Shore hardness 60. Tested in-radius size between 0.50mm & 2.67mm. For use with water up to 85°C.
'EP11/8/3 BLK'. Black coloured, injection moulded EPDM 'O' rings. Shore hardness 80. Tested in-radius size 1.3mm. For use with water up to 85°C.
'EPDM 9611 'O' rings'. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 60. Tested in-radii sizes between 0.48mm & 2.0mm. Between October 2019 and 12th June 2022, the ‘O’ rings are for use with water up to 23°C. Between 13th June 2022 and 31st October 2024, the ‘O’ rings are for use with water up to 85°C.
'EPDM 9710 'O' rings'. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 75. Between June 2019 and 12th June 2022, the 'O' ring with an in-radius size of 3.5mm is for use with water up to 23°C. Between June 2019 and 12th June 2022, the 'O' rings with an in-radius size of 0.5mm and 2.0mm are for use with water up to 60°C. Between 13th June 2022 and 30th June 2024, the 'O' rings with an in-radius size of 0.5mm and 2.0mm are for use with water up to 85°C.
'560AL Water Seal'. Black coloured, injection moulded EPDM seal. Shore hardness 70. Tested in-radius size 2.12mm. For use with water up to 23°C.
'GJ-yzxj-V100'. Black coloured, compression moulded EPDM valve seat. Shore hardness 70. Tested in-radius 8.00mm. For use with water up to 23°C.
'EP60/1 BLK'. Black coloured, compression moulded EPDM diaphragm seal. Shore hardness 60. Tested in-radius size 0.75mm. For use with water up to 85°C.
'E9053AA 'O' rings'. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 90. Tested in-radii sizes between 0.5mm and 3.5mm. For use with water up to 85°C. When processing an application for WRAS Product Approval incorporating these components, the in-radius tolerance rule cannot be applied, i.e. the ‘O’ rings with an in-radius size of between 0.5mm and 3.5mm are the only components covered by the scope of this approval.
'Drincable 800'. Blue coloured, extruded, cylindrical shaped EPDM cable. The EPDM outer sheath is the water contact part and has a shore hardness of 50 and tested in-radius size of between 0.6mm & 1.8mm. For use with water up to 23°C.
'EP50/1 BLK'. Black coloured, injection moulded EPDM 'O' rings. Shore hardness 50. Tested in-radius 1.7mm. For use with water up to 85°C.
'100A & 12A'. Black coloured, vacuum compression moulded EPDM gaskets. Shore hardness 70. 100A has a tested in-radius size of 4.0mm. 12A has a tested in-radius size of 1.11mm. For use with water up to 85°C.
'EP70 Black EPDM Diaphragm Seals'. Black coloured, compression moulded EPDM diaphragm seals. Shore hardness 70. Tested in-radius size 1,0mm. For use with water up to 85°C.
'EPDM-100T-70 Gasket'. Black coloured, compression moulded EPDM rubber gasket. Shore hardness 70. Tested in-radius size 2.1mm. For use with water up to 85°C.
'EP1/1/5 BLK EPDM Diaphragm'. Black coloured, compression moulded EPDM diaphragm. Shore hardness 70. Tested in-radius size 0.65mm. For use with water up to 85°C.
'TIMO 3-70 'O' rings and gaskets'. Black coloured, injection moulded EPDM 'O' rings and gaskets. Shore hardness 70. Tested in-radius size between 0.50mm & 2.67mm. For use with water up to 85°C.
'TIMO 5-70 Gaskets & ‘O’ rings'. Black coloured, injection moulded EPDM gaskets & ‘O’ rings. Shore hardness 70. Tested in-radius size between 0.50mm & 2.66mm. For use with water up to 85°C.
'EP60/1 BLK 'O' rings'. Black coloured, injection moulded EPDM 'O' rings. Shore hardness 60. Tested in-radius size 1.77mm. For use with water up to 85°C.
'EP60PF - EP80PF 'O' rings, gaskets & seals'. Black coloured, compression moulded EPDM 'O' rings, gaskets & seals. Shore hardness between 60 & 80. Tested in-radius size between 0.75mm & 2.66m. For use with water up to 85°C.
'BV10, BV12, BV10-U, BV11, BV12-U, BV13, BV14, BV38W, BV49W, BV203_204, BV223_224, BV241_242, BV251_252 & BV232 valve seats'. Black coloured, compression moulded EPDM valve seats. Shore hardness 70. Tested in-radius 8.00mm. For use with water up to 23°C.
‘EP4118F, EP4518F, EP5118F, EP5518F, EP6118F, EP6518F, EP6512F (also known as EP6512P), E7008F, EP7118F, EP7518F, EP8018F, EP8118F, EP8518F & EP9118F’. Range of black coloured, compression moulded, EPDM ‘O’ rings and gaskets. Shore hardness between 40 & 90. ‘O’ rings with tested in-radii sizes of between 0.25mm & 5.00mm. Gaskets with tested in-radii sizes of between 0.25mm & 7.50mm. For use with water up to 85°C.
'EP80/2 BLK 'O'-rings'. Black coloured, injection moulded EPDM 'O' rings. Tested in-radius size 1.5mm. For use with water up to 85°C.
'E44'. Black coloured, injection moulded EPDM sealing ring. Shore hardness 70. Tested in-radius size 1.5mm. For use with water up to 85°C.
'01/U80EP'. Black coloured, injection moulded EPDM 'O' rings and gaskets. Shore hardness 80. Tested in-radii sizes between 1.00mm & 2.5mm. For use with water up to 85°C.
EP80/2 BLK 'O' rings & gaskets. Black coloured, injection moulded EPDM 'O' rings & gaskets. Shore hardness 80. Tested in-radius size 1.5mm. . For use with water up to 85°C.
'09-557'. Black coloured, compression moulded EPDM 'strip'. Shore hardness 80. Tested in-radius size 2.0mm. For use with water up to 85°C.
‘EP4118F, EP4518F, EP5118F, EP5518F, EP6118F, EP6518F, EP6512F (also known as EP6512P), E7008F, EP7118F, EP7518F, EP8018F, EP8118F, EP8518F & EP9118F’. Range of black coloured, compression moulded, EPDM ‘O’ rings and gaskets. Shore hardness between 40 & 90. ‘O’ rings with tested in-radii sizes of between 0.25mm & 5.00mm. Gaskets with tested in-radii sizes of between 0.25mm & 7.50mm. For use with water up to 85°C.
`B1-4773`. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 70. Tested in-radius size 1.5mm. For use with water up to 85°C.
`70 EP 111 p`. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 70. Tested in-radius size 1.5mm. For use with water up to 85°C.
'51M7531'. Black coloured, injection moulded EPDM rubber 'O'-ring. Shore hardness 75. Tested in-radius 1.5mm. For use with water up to 85°C.
'TWK7528'. Black coloured, injection moulded EPDM rubber 'O'-ring. Shore hardness 75. Tested in-radius 1.5mm. For use with water up to 85°C.
'GJ-yzxj-V40 EPDM valve seat'. Black coloured, compression moulded EPDM valve seat. Shore hardness 70. Tested in-radius size 3.5mm. For use with water up to 85°C.
'EPDM4570‐70/Jinan Hongde Gasket'. Black coloured, compression moulded gaskets. Shore hardness 70. Tested in-radius 2.0mm. For use with water up to 85°C.
'Qmonix® 558CH'. Black coloured, transfer moulded, EPDM 'O' rings. Shore hardness 70. Tested in-radius size 0.85mm. For use with water up to 85°C.
‘PX70N-0201 washers, ‘O’ rings, bushes gaskets & discs’. Black coloured, injection moulded EPDM components with a shore hardness of 70. The washers have a tested in-radius size of 3.0mm. The ‘O’ rings have a tested in-radius size of 3.5mm. The bushes gaskets have a tested in-radius size of 2.0mm. The discs have a tested in-radius size of 2.65mm. All are for use with water up to 85°C.
`EP1/1/5 BLK 'O' rings, seals & gaskets'. Black coloured, injection moulded EPDM 'O' rings, seals & gaskets. Shore hardness 70. The 'O' rings & gaskets have a tested in-radius size of 1.5mm. The seals have a tested in-radius size of 0.8mm. For use with water up to 85°C.
'EP10/7/7 BLK gaskets & 'O' rings'. Injection moulded, black coloured EPDM gaskets & 'O' rings. Shore hardness 70. The gaskets have an in-radius size of 0.75mm and for use with water up to 85°C. The ‘O’ rings have an in-radius size of 1.5mm and between 1st July 2021 and 21st September 2021, the ‘O’ rings were for use with water up to 23°C. Between 22nd September 2021 and 28th February 2026, the ‘O’ rings are for use with water up to 85°C.
'EUW-70'. Black coloured, injection moulded EPDM diaphragm. Shore hardness 70. Tested in-radius size 0.95mm. For use with water up to 60°C.
'60EP124p'. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 60. Tested in-radius size 1.5mm. For use with water up to 85°C.
'EP6008'. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 60. Tested in-radius size 0.8mm. For use with water up to 85°C.
'5594903 'O' rings'. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 90. Tested in-radii sizes between 0.5mm and 3.5mm. For use with water up to 85°C. When processing an application for WRAS Product Approval incorporating these components, the in-radius tolerance rule cannot be applied, i.e. the ‘O’ rings with an in-radius size of between 0.5mm and 3.5mm are the only components covered by the scope of this approval.
`EP2/9/10 BLK 'O' rings`. Black coloured, injection moulded EPDM 'O' rings. Shore hardness 70. Tested in-radius size 1.2mm. For use with water up to 85°C.
`EP11/01/13 BLK 'O' rings & seals`. Black coloured, injection moulded 'O' rings & seals. Shore hardness 60. The 'O' rings have a tested in-radius size of 1.8mm. The seals have a tested in-radius size of 0.75mm. For use with water up to 85°C.
Page 1 of 3
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
