Section Code 5160 :
Back To Directory Sections'MOLYguard HVG'. Clear silicone lubricant. Apply as per manufacturer's instructions. For use with water up to 85°C.
'SAPPHIRE Endure Bearing Grease'. White coloured grease. For use with water up to 85°C.
'Turmsilon GL 320-G'. White coloured silicone grease/lubricant. For use with water up to 85°C.
'G. Beslux Bessil EH-3'. White coloured silicone grease. For use with water up to 85°C.
'Sanglier Generic Silicone Spray'. Clear, colourless silicone lubricant spray. Apply as per manufacturer's TDS 'issue 1' dated 25/05/2018. For use with water up to 85°C.
'Flomasta Silicone Spray'. Clear, colourless silicone lubricant spray. Apply as per manufacturer's TDS 'issue 1' dated 25/05/2018. For use with water up to 85°C.
'CB SIlicone Lubricant Spray 400ml (F15215)'. Clear, colourless silicone lubricant spray. Apply as per manufacturer's TDS 'issue 1' dated 28/03/2018. For use with water up to 85°C.
'PH040 & PHCB040 SIlicone Spray 400ml'. Clear, colourless silicone lubricant spray. Apply as per manufacturer's TDS 'issue 1' dated 25/05/2018. For use with water up to 85°C.
'Unisilkon L 250 L, Unisilkon L 641 & Syntheso LM 220'. White coloured (opaque) lubricant greases. Apply as per manufacturer's instructions. For use with water up to 85°C.
'EasyJoint SA & EasyJoint SS'. Clear, Silicon Oil liquid lubricant. Apply as per manufacturer's instructions. For use with water up to 85°C
'Easyjoint LS & Easyjoint SS'. Clear, transparent lubricants.Apply as per manufacturer's instructions 'rev. 1' dated 26/01/2016. For use with water up to 23°C.
'Unisilkon TK 002/500'. Colourless lubricating oil. Apply as per manufacturer's data sheet. For use with water up to 60°C.
'TP1'. Factory applied, colourless solid lubricant. Apply as per manufacturer's instructions 'LDAP-005', issue 1, dated 11/11/2016. For use with water up to 85°C.
'Paraliq GTE 703'. White coloured lubricant grease. For use with water up to 85°C.
'Anticorit MKR 27'. Yellow coloured (transparent) oil. Mix oil with de-ionised water (at a temperature of 50°C) in a ratio of 15:85. Cure for 12 hours@25°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.
'EasyJoint SE'. White coloured Silicon Emulsion. Apply as per manufacturer's instructions. For use with water up to 23°C.
'EasyJoint SG'. White (translucent) silicone grease. Apply as per manufacturer's instructions. For use with water up to 85°C.
'Loxeal Olio 1000'. Clear, silicone oil based lubricant. For use with water up to 70°C.
'Berusil SM 2000'. Clear, liquid lubricant. Apply as per manufacturer's instructions. For use with water up to 85°C.
'SG M494'. White coloured (opaque) silicone grease. Apply as per manufacturer's instructions. For use with water up to 85°C.
`Silicone Valve Grease - 0250/0077`. Unpigmented (colourless), translucent silicone grease. For use with water up to 85°C.
'Silicompound FCA 125'. White coloured, silicone paste. For use with water up to 65°C.
'Berulub Sihaf 2'. White coloured lubricant. Apply as per manufacturer's instructions. No cure required. For use with water up to 85°C.
'Cassida Grease MD 2'. White coloured (opaque), silicone grease. Apply as per manufacturer's instructions. For use with water up to 85°C.
'Molykote® G-5511'. White coloured (opaque), silicone based grease. Apply as per manufacturer's instructions. For use with water up to 85°C.
'Great Wall Water Pipeline Joint Lubricant (Si)'. Clear, translucent silicone base lubricant. Apply as per manufacturer's instructions. No cure required. For use with water up to 85°C.
'SH Special Seal grease'. Opaque, white coloured silicone grease. Apply as per manufacturer's instructions. No cure required. For use with water up to 65°C.
'Greasil 4000'. White coloured silicone grease. For use with water up to 85°C.
'Bessil F-50 Silicone oil'. Clear, colourless liquid intended to be used as a lubricant. Apply as per manufacturer's instructions. For use with water up to 85°C.
'Bessil F-10000'. Transparent, unpigmented silicone lubricant. Apply as per manufacturer's instructions. For use with water up to 85°C.
'BBF 3.02'. Clear, uncoloured lubricating oil. For use with water up to 85°C.
'G.Beslux Bessil EH-00 Silicone Paste'. White coloured, opaque silicone grease/paste. For use with water up to 85°C.
'G.A Bessil 25 Lubricating Grease'. Uncoloured (translucent) silicone oil/grease. For use with water up to 85°C.
'Tecnite SC 250 W Lubricating Grease'. Uncoloured (translucent) silicone oil/grease. For use with water up to 85°C.
'IKV Tribostar SSI 1203TF/IKV Tribofood SSI 1203TF'. Translucent, white coloured silicone greases. Apply as per manufacturer's instructions. For use with water up to 85°C.
'Grasso L. 100 Lubricating Grease'. White coloured grease. Apply as per manufacturer's instructions. For use with water up to 85°C.
'Bluesil Paste 408'. White coloured, translucent silicone paste lubricant. Apply as per manufacturer's instructions. For use with water up to 85°C.
'Krytox™ Oils; GPL 104, 143AB, VPF 1525, VPF 1531, AUT 1045, GPL 105, GPL 106, 143AC, 143AD & GPL 107'. Clear (colourless), perfluoropolyether oils. 'Krytox™ Greases; GPL 204, 240AB, AUT 2045, GPL 205, GPL 206, 240AC, 240AD & GPL 207'. White coloured, Polytetrafluoroethylene thickened perfluoropolyether greases. All are suitable for use with water up to 85°C.
'RP380s & RP361'. Off-white coloured (opaque) silicone greases. Apply as per manufacturer's instructions. For use with water up to 65°C.
'FS Sill Tech Grease'. Off-white coloured (opaque) silicone grease. Apply as per manufacturer's instructions. For use with water up to 65°C.
'REGZ40 & REGZ41'. White coloured silicone greases. For use with water up to 85°C.
'SAGITTA VP 763 Silicone Grease'. White coloured, opaque silicone grease. Apply as per manufacturer's instructions. For use with water up to 85°C.
`Griffon P-20` Lubricant. White coloured lubricant in the form of a paste. Apply as per manufacturer's instructions. No cure required. For use with water up to 23°C.
'IKV Tribostar STF 2501 & Addisil WTG 1'. Translucent, white coloured silicone greases. Apply as per manufacturer's instructions. For use with water up to 85°C.
'Arvina SG3'. White coloured (opaque), silicone oil based lubricant. Apply as per manufacturer's technical date sheet. For use with water up to 85°C.
'Addisil WTG 1'. Translucent, white coloured silicone greases. Apply as per manufacturer's instructions. For use with water up to 85°C.
`Ruby Veg Soft Soap/EasyJoint Uni`. Translucent, amber coloured, soya oil lubricant. Apply as per manufacturer's technical datasheet 'revision 2' dated '22/09/21'. For use with water up to 23°C.
'Super Lube'. Colourless (transparent) lubricant. Apply as per manufacturer's instructions. For use with water up to 65°C.
'ELBESIL BM'. Clear, silicone lubricant. For use with water up to 85°C.
`BK Standard Lubricant`. Clear (colourless), translucent, soap based lubricant paste. For use with water up to 60°C.
Page 1 of 3
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.