Section Code 5160 :
Back To Directory Sections'MOLYguard HVG'. Clear silicone lubricant. Apply as per manufacturer's instructions. For use with water up to 85°C.
'SAPPHIRE Endure Bearing Grease'. White coloured grease. For use with water up to 85°C.
'Turmsilon GL 320-G'. White coloured silicone grease/lubricant. For use with water up to 85°C.
'G. Beslux Bessil EH-3'. White coloured silicone grease. For use with water up to 85°C.
'Sanglier Generic Silicone Spray'. Clear, colourless silicone lubricant spray. Apply as per manufacturer's TDS 'issue 1' dated 25/05/2018. For use with water up to 85°C.
'Flomasta Silicone Spray'. Clear, colourless silicone lubricant spray. Apply as per manufacturer's TDS 'issue 1' dated 25/05/2018. For use with water up to 85°C.
'CB SIlicone Lubricant Spray 400ml (F15215)'. Clear, colourless silicone lubricant spray. Apply as per manufacturer's TDS 'issue 1' dated 28/03/2018. For use with water up to 85°C.
'PH040 & PHCB040 SIlicone Spray 400ml'. Clear, colourless silicone lubricant spray. Apply as per manufacturer's TDS 'issue 1' dated 25/05/2018. For use with water up to 85°C.
'Unisilkon L 250 L, Unisilkon L 641 & Syntheso LM 220'. White coloured (opaque) lubricant greases. Apply as per manufacturer's instructions. For use with water up to 85°C.
'EasyJoint SA & EasyJoint SS'. Clear, Silicon Oil liquid lubricant. Apply as per manufacturer's instructions. For use with water up to 85°C
'Easyjoint LS & Easyjoint SS'. Clear, transparent lubricants.Apply as per manufacturer's instructions 'rev. 1' dated 26/01/2016. For use with water up to 23°C.
'Unisilkon TK 002/500'. Colourless lubricating oil. Apply as per manufacturer's data sheet. For use with water up to 60°C.
'TP1'. Factory applied, colourless solid lubricant. Apply as per manufacturer's instructions 'LDAP-005', issue 1, dated 11/11/2016. For use with water up to 85°C.
'Paraliq GTE 703'. White coloured lubricant grease. For use with water up to 85°C.
'Anticorit MKR 27'. Yellow coloured (transparent) oil. Mix oil with de-ionised water (at a temperature of 50°C) in a ratio of 15:85. Cure for 12 hours@25°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.
'EasyJoint SE'. White coloured Silicon Emulsion. Apply as per manufacturer's instructions. For use with water up to 23°C.
'EasyJoint SG'. White (translucent) silicone grease. Apply as per manufacturer's instructions. For use with water up to 85°C.
'Loxeal Olio 1000'. Clear, silicone oil based lubricant. For use with water up to 70°C.
'Berusil SM 2000'. Clear, liquid lubricant. Apply as per manufacturer's instructions. For use with water up to 85°C.
'SG M494'. White coloured (opaque) silicone grease. Apply as per manufacturer's instructions. For use with water up to 85°C.
Page 1 of 6
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.