Water Regulations Approval Scheme Ltd

Bituminous Based Products

Section Code 5021 : Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

Back To Directory Sections

WRAS Approval Number: #2202503

‘Inertol BS10’. Factory applied, black coloured bitumen coating. Apply as per manufacturer’s technical data sheet 'no. 786.3' dated 2013-V2'. Cure for 5 hours@23°C or 30 minutes@50°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials listed in this section are not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 2202503
Expiry date:: 28/02/2027
Manufacturer:: Mäder Group

Company Name
Mäder Group
Address
Burschgrundstrasse 10-12, 45894 Gelsenkirchen
Country
Germany

View All Listings by this Company

WRAS Approval Number: #2202508

‘Inertol BS10’. Factory applied, black coloured bitumen coating. Apply and cure as per manufacturer’s instructions 'BF-T06', issue number '03' dated 01.12.2021. For use with water up to 60°C. Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials listed in this section are not approved for use for contact with water that is required to be wholesome on large water retaining structures such as lining of pipes, cisterns or water storage tanks.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 2202508
Expiry date:: 28/02/2027
Manufacturer:: Samsun Makina Sanayi A.S.

Company Name
Samsun Makina Sanayi A.S.
Address
Organize Sanayi Bolgesi, Yasar Dogu Caddesi, No. 33 P.K. 136
Country
55267 Kutlukent,

View All Listings by this Company

WRAS Approval Number: #2205506

'SOLID-02'. Factory applied, black coloured, bituminous coating. Apply as per manufacturer's user instructions 'File No.: SOLID-0069, Vison: SLD-03, Date of issue: 2015-01-01'. Cure for 2 hours @60°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 2205506
Expiry date:: 31/05/2027
Manufacturer:: Shanxi Solid Industrial Co., Ltd.

Company Name
Shanxi Solid Industrial Co., Ltd.
Address
28F, No.8 Changxing South Street, Jinyuan District, Taiyuan, Shanxi
Country
China

View All Listings by this Company

WRAS Approval Number: #2208517

'Endolac 245.30 FGC'. Factory applied, black coloured, bituminous coating. Apply as per manufacturer's technical data sheet dated 04/05/2022. Cure for 7 days@20°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 2208517
Expiry date:: 31/08/2027
Manufacturer:: BS Coatings

Company Name
BS Coatings
Address
Allee Paul Sabatier, BP 88, 27940 Aubevoye
Country
France
Phone
+ 33 32773077

View All Listings by this Company

WRAS Approval Number: #2310528

`9011 modified bitumen anticorrosive coating`. Factory applied, black coloured bituminous coating. Apply as per manufacturers user instructions 'File No.: SDC-0051', 'Vison: A1', dated '2021-03-01'. Cure for 7 days@23°C. For use with water up to 35°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 2310528
Expiry date:: 31/10/2028
Manufacturer:: Suns Pipelines Co. Ltd.

Company Name
Suns Pipelines Co. Ltd.
Address
No. 8 Pangcun Village, Cast Industry District, Gaoping City, Shanxi Province
Country
China

View All Listings by this Company

WRAS Approval Number: #2212572

'PCBIT III HIGHBUILD'. Factory applied, black coloured bituminous coating. Apply as per manufacturer's instructions for use, reference 'PCC/ PC 820' dated 27.11.2023. Cure for 5 minutes@30°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 2212572
Expiry date:: 31/12/2027
Manufacturer:: PC Chanda & Co. PVT Ltd.

Company Name
PC Chanda & Co. PVT Ltd.
Address
Ravi Auto House, 103 Park Street, 6th Floor, Kolkata 700016
Country
India

View All Listings by this Company

WRAS Approval Number: #2205577

'TIANYI SUNS-012'. Factory applied, black coloured, bituminous coating. Apply as per manufacturer's user instructions 'File No.: Tianyi Suns-0024, Version: TYS-03, Date of issue: 2021-05-05'. Cure for 2 hours @60°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 2205577
Expiry date:: 31/05/2027
Manufacturer:: Tianyi Suns Pipe & Fittings Co., Ltd.

Company Name
Tianyi Suns Pipe & Fittings Co., Ltd.
Address
2802, Building B, Yangguangcheng No. 8, Changxingnanjie, Jinyuan District, Taiyuan, Shanxi
Country
China

View All Listings by this Company

WRAS Approval Number: #240255033

'ELECTROCOAT BP 1119'. Factory applied, black coloured Bituminous Paint. Apply as per manufacturer's TDS Document No: 'ECL/ TDS / BP-1119-Bituminous Paint', Issue Date '10-Aug-20', Version No: '01'. Cure for 12 minutes at 45°C, followed by 10 hours at 28°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 240255033
Expiry date:: 28/02/2029
Manufacturer:: Electrosteel Castings Ltd

Company Name
Electrosteel Castings Ltd
Address
30 B.T. Road PO Sukchar, District 24 Parganas (N) West Bengal, Kolkata - 700115
Country
743179

View All Listings by this Company

WRAS Approval Number: #240255047

'JERLAC Bituminous sealer coat black'. Factory applied, black coloured Bitumen coating. Apply as per manufacturer's TDS reference 'BN433', dated '27/07/2023', revision '00'. Cure for 12 hours@30°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 240255047
Expiry date:: 28/02/2029
Manufacturer:: M/S German Polymers and Coatings (PVTE) Limited

Company Name
M/S German Polymers and Coatings (PVTE) Limited
Address
No-18, Onivakkam Village Kumuzhi Panchayat, Chengalpet District, Pin-603202, Tami Nadu
Country
India

View All Listings by this Company