Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Section Code 2410 : Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed. It should also be noted that there is a likelihood of some materials being leached into the water, which together with materials already in the water at source, could exceed the maximum limits set in the EC Directive on Water Quality and therefore it is recommended that before putting such units into service where the water may be ingested, advice should first be sought from the Water Undertaker.
Back To Directory Sections
WRAS Approval Number: #1907392
Instinct range of magnetic scale inhibitors consisting of central magnets surrounded by knitted copper wire mesh within an acetal or copper body. Connection is via a push fit connection or compression.
Maximum working pressure 8.0 bar.
Maximum operating temperature 40°C.
- Section:
- 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
- WRAS Approval Number:
- 1907392
- Expiry date:
- 31/07/2024
- Marking:
- INSTINCT BY SCALEMASTER & SERIAL NO ON ADHESIVE LABEL ON BODY
- Installation Requirements:
- R001 R120 R150 R170 R290
- Model:
-
15mm Compression Magnetic Instinct - 403328
22mm Compression Magnetic Instinct- 403335
- Factor:
- Plumbing & Heating Group
Company Name
Plumbing & Heating Group
Address
C/O Tippers Builders Merchants,
Europa Way,
Lichfield
Postcode
WS14 9TZ
View All Listings by this Company
WRAS Approval Number: #1907393
Entity range of magnetic scale inhibitors consisting of central magnets surrounded by knitted copper wire mesh within an acetal or copper body. Connection is via a push fit connection or compression.
Maximum working pressure 8.0 bar.
Maximum operating temperature 40°C.
- Section:
- 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
- WRAS Approval Number:
- 1907393
- Expiry date:
- 31/07/2024
- Marking:
- ENTITY & SERIAL NO ON ADHESIVE LABEL ON BODY
- Installation Requirements:
- R001 R120 R150 R170 R290
- Model:
-
15mm Compression Magnetic Entity 403519
22mm Compression Magnetic Entity 403526
- Factor:
- PHIL- PLUMBING AND HEATING INVESTMENTS LIMITED
Company Name
PHIL- PLUMBING AND HEATING INVESTMENTS LIMITED
Address
Quayside 2A
Wilderspool Park
Greenails Avenue
Stockton Heath
Postcode
WA4 6HL
View All Listings by this Company
WRAS Approval Number: #1909116
WRAS Approval Number: #2005025
Range of water conditioners incorporating Ball valves. TurboMAG models Simplex, Duplex Skid, Duplex Wall and Quadplex Skid incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum working pressure 10.0 bar.
- Section:
- 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
- WRAS Approval Number:
- 2005025
- Expiry date:
- 31/05/2025
- Note:
- Cold water use only.
- Size:
- See model
- Marking:
- Hydotec, model, size, pressure and operating info on label on body.
- Installation Requirements:
- R001 R120 R170 R290
- Model:
-
TurboMAG Simplex - 1" BSP (M)
TurboMAG Duplex Skid - 1.5" BSP (M)
TurboMAG Duplex Wall - 1.5" BSP (M)
TurboMAG Quadplex Skid - 2" BSP (M)
TurboMAG Quadplex Vessel - DN50 Flanged.
- Factor:
- Hydrotec International Water Treatment Limited
Company Name
Hydrotec International Water Treatment Limited
Address
38 Main Street
Swords Country
Dublin
Country
Ireland
View All Listings by this Company
WRAS Approval Number: #2006054
Range of water conditioners with stainless steel or brass/copper alloy.
Maximum working pressure 10.0 bar. Maximum operating temperature 100ºC.
- Section:
- 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
- WRAS Approval Number:
- 2006054
- Expiry date:
- 30/06/2025
- Marking:
- Suprion, model, serial number, flow arrow and other product info on label on body
- Installation Requirements:
- R001 R120 R150 R170 R290
- Model:
-
Model type A (Brass and copper alloy)
JS-12E15: 15mm compression x 15mm compression.
JS-75E22: 22mm compression x 22mm compression.
EH-12F: ½” BSP (M) x ½” BSP (M).
EH-75E22: 22mm compression x 22mm compression.
Model type B (Fibre glass and copper alloy)
JS-75: ¾” BSP (F) x ¾” BSP (F).
JS-100: 1” BSP (F) x 1” BSP (F).
JS-125: 1 ¼” BSP (F) x 1 ¼” BSP (F).
JS-150: 1 ½” BSP (F) x 1 ½” BSP (F).
EH-75: ¾” BSP (F) x ¾” BSP (F).
EH-100: 1” BSP (F) x 1” BSP (F).
EH-125: 1 ¼” BSP (F) x 1 ¼” BSP (F).
EH-150 : 1 ½” BSP (F) x 1 ½” BSP (F).
Model type C (Fibre glass and steel)
JS-250: 2 ½” BSP (F) x 2 ½” BSP (F).
JS-400: 4” BSP (F) x 4” BSP (F).
EH-250: 2 ½” BSP (F) x 2 ½” BSP (F).
EH-400: 4” BSP (F) x 4” BSP (F).
- Factor:
- Ion Water Products Ltd
Company Name
Ion Water Products Ltd
Address
Terminus Road
Chichester
West Sussex
Postcode
PO19 8DW
View All Listings by this Company - Manufacturer:
- Sunward Co Ltd
Company Name
Sunward Co Ltd
View All Listings by this Company
Back To Directory Sections Page 3 of 14