Range of commercial washing machines with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with three ¾” x ¾” BSP (F) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet prior to a HDPE inlet hose with ¾” x ¾” captive nut end connections. Maximum working pressure 5.7 Bar. Maximum operating temperature 60°C.

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2106021

Expiry date:

30/06/2026

Note:

This appliance incorporates a Fluid Category 5 backflow prevention device. The double check valve assemblies supplied with this product must be installed on all available inlets to maintain the validity of the WRAS approval. No detergents, softeners or other products are to be placed within the dispenser compartment that represent a risk greater than Fluid Category 3.

Size:

¾” BSP (F) (to double check valve assembly)

Marking:

Alliance Laundry logo, model, serial number, product info on label on back panel. Alliance laundry logo, model, serial number on label inside of door.

Installation Requirements:

R001 R160 R574

Model:

UCEXXX, SCEXXX, HCEXXX, ICEXXX & PCEXXX XXX denotes the drum capacity and can be replaced with the following digits representing lb’s: 020, 030, 040, 060, 080 & 100.

Factor:

Alliance Laundry CE s.r.o

Company Name

Alliance Laundry CE s.r.o

Address

Místecká 1116, 742 58 Príbor

Country

Czech Republic

Phone

+420 556 768 885

View All Listings by this Company

Range of commercial front loading washing machines with flow controlled by solenoid valve and discharged via a type AD air gap arrangement (verified by test - suitable for backflow protection against fluid category 5). The product is supplied with a single check valve assembly (suitable for backflow protection against Fluid Category 2) and PEX lined rubber inlet connections hoses. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2201070

Expiry date:

31/01/2027

Size:

¾” BSP captive nut (to inlet hoses)

Marking:

Alliance CE & company details, model and other information on adhesive label on body

Installation Requirements:

R001

Model:

WM75***** C & WM85***** C RANGE OF WASHING MACHINES

Factor:

Alliance Laundry CE s.r.o

Company Name

Alliance Laundry CE s.r.o

Address

Místecká 1116, 742 58 Príbor

Country

Czech Republic

Phone

+420 556 768 885

View All Listings by this Company

Range of commercial, front loading washing machines with flow controlled by a solenoid valve and discharged via type AB air gap assembly (verified by test, suitable for backflow protection against fluid category 5). The inlets incorporate a stainless-steel strainer. Maximum working pressure 6 Bar Maximum operating temperature 85°C

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2210061

Expiry date:

31/10/2027

Size:

Hot inlet - EPDM lined flexible hose assembly with 3/4" BSP captive nut end connections Cold inlet - PVC lined flexible hose assembly with 3/4" BSP captive nut end connections.

Marking:

Girbau on control panel, Girbau, model, operating info on label on rear panel.

Installation Requirements:

R001 R160

Model:

HS7009/23 E, HS70009/23 H HS7013/30 E, HS7013/30 H, HS7013/30 V HS7018/45 E, HS7018/45 H, HS7018/45 V HS7024/60 E, HS7024/60 H, HS7024/60 V HS7028/70 E, HS7028/70 H, HS7028/70 V HS7032/80 E, HS7032/80 H, HS7032/80 V

Manufacturer:

Girbau S.A.

Company Name

Girbau S.A.

Address

Carretera de Manlleu, KM 1, 08500 VIC (Barcelona)

Country

Spain

View All Listings by this Company

Range of front loading commercial washing machines with flow controlled by solenoid valves and discharged via a type `AD` airgap (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with a dual layer composite supply hose (blue outer/black inner). Maximum working pressure 5.0 bar. Cold water use only

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2306319

Expiry date:

30/06/2028

Size:

¾” BSP(M)

Marking:

IMESA badge on front casing; IMESA, address, Model No., serial No & other tech info on data adhesive label on back of machine.

Installation Requirements:

R001 R150

Model:

S11… LM11 High spin washing 11 Kg max capacity S14… LM14 High spin washing 14 Kg max capacity S18… LM18 High spin washing 18 Kg max capacity S23… LM23 High spin washing 23 Kg max capacity S26… LM26 High spin washing 26 Kg max capacity S32… LM32 High spin washing 32 Kg max capacity R11.. RC11 Low spin washing 11 Kg max capacity R14… RC14 Low spin washing 14 Kg max capacity R18… RC18 Low spin washing 18 Kg max capacity R23… RC23 Low spin washing 23 Kg max capacity R30… RC30 Low spin washing 30 Kg max capacity R40… RC40 Low spin washing 40 Kg max capacity H18… D2W18 Aseptic barrier washing machine 18 Kg capacity H23… D2W23 Aseptic barrier washing machine 23 Kg capacity

Manufacturer:

Imesa S.p.A.

Company Name

Imesa S.p.A.

Address

Via Degli Olmi 22 31040 Cessalto (YV) Italy

View All Listings by this Company

Range of front loading commercial washing machines with flow controlled by solenoid valve and discharged via type AB air gap assembly. Maximum working pressure 6.0 Bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2306046

Expiry date:

30/06/2028

Size:

Cold inlet, PVC lined flexible hose assembly with 3/4" BSP captive nut end connections. Hot inlet, EPDM lined nylon braided flexible hose assembly with 3/4" BSP captive nut end connections.

Marking:

Girbau logo and model on front, Girbau logo, model, weight, CE, serial number, and other technical information on adhesive label on rear of body

Installation Requirements:

R001 R009 R160

Model:

HS-6008 LC-E HS-6008 LC-H HS-6008 LP-E HS-6008 LP-H HS-6008 CC-E HS-6008 CC-H HS-6013 IC-E HS-6013 IC-H HS-6013 IC-V HS-6013 LC-E HS-6013 LC-H HS-6013 LC-V HS-6013 CC-E HS-6013 CC-H HS-6013 CC-V HS-6017 IC-E HS-6017 IC-H HS-6017 IC-V HS-6017 LC-E HS-6017 LC-H HS-6017 LC-V HS-6017 CC-E HS-6017 CC-H HS-6017 CC-V HS-6024 IC-E HS-6024 IC-H HS-6024 IC-V HS-6024 LC-E HS-6024 LC-H HS-6024 LC-V HS-6024 CC-E HS-6024 CC-H HS-6024 CC-V HS-6028 IC-E HS-6028 IC-H HS-6028 IC-V HS-6028 LC-E HS-6028 LC-H HS-6028 LC-V HS-6028 CC-E HS-6028 CC-H HS-6028 CC-V HS-6032 IC-E HS-6032 IC-H HS-6032 IC-V HS-6032 LC-E HS-6032 LC-H HS-6032 LC-V HS-6032 CC-E HS-6032 CC-H HS-6032 CC-V RMS610 LC-E RMS610 LC-H RMS610 LP-E RMS610 LP-H RMS610 CC-E RMS610 CC-H RMS613 LC-E RMS613 LC-H RMS613 LC-V RMS613 LP-E RMS613 LP-H RMS613 LP-V RMS613 CC-E RMS613 CC-H RMS613 CC-V RMG613 LC-E RMG613 LC-H RMG613 LC-V RMG613 LP-E RMG613 LP-H RMG613 LP-V RMG613 CC-E RMG613 CC-H RMG613 CC-V RMS617 LC-E RMS617 LC-H RMS617 LC-V RMS617 LP-E RMS617 LP-H RMS617 LP-V RMS617 CC-E RMS617 CC-H RMS617 CC-V RMG617 LC-E RMG617 LC-H RMG617 LC-V RMG617 LP-E RMG617 LP-H RMG617 LP-V RMG617 CC-E RMG617 CC-H RMG617 CC-V RMS623 LC-E RMS623 LC-H RMS623 LC-V RMS623 LP-E RMS623 LP-H RMS623 LP-V RMS623 CC-E RMS623 CC-H RMS623 CC-V RMG623 LC-E RMG623 LC-H RMG623 LC-V RMG623 LP-E RMG623 LP-H RMG623 LP-V RMG623 CC-E RMG623 CC-H RMG623 CC-V RMS628 LC-E RMS628 LC-H RMS628 LC-V RMS628 LP-E RMS628 LP-H RMS628 LP-V RMS628 CC-E RMS628 CC-H RMS628 CC-V RMG628 LC-E RMG628 LC-H RMG628 LC-V RMG628 LP-E RMG628 LP-H RMG628 LP-V RMG628 CC-E RMG628 CC-H RMG628 CC-V Model number breakdown: HS = High Speed, Soft mounted washing machines. RMG = Medium Speed, Hard mounted washing machines. RMS = Low Speed, Hard mounted washing machines. 6XX & 6XXX = Girbau’s 6th Generation of Washer-Extractors Clothes capacity: 6008=8kg, 6013=13kg, 6017=17kg, 6024=24kg, 6028=28kg, 6032=32kg, 610=10kg, 613=13kg, 617=17kg, 623=23kg, 628=28kg. Control system: IC = Inteli Control, LC = Logi Control, LP=Logi Pro Control, CC = Coin Control Heating system: E = electrical, H = hot water, V = steam Please note that the “water configuration” of each machine depends on its capacity and its control type (LC, LP, CC, IC). It doesn’t depend on the kind of heating system (E, H, V). Thus, all models listed above are included in one of following three possible configurations of its water system: 1) Machines with 8kg and 10 kg of capacity. 2) Machines with capacity between 13kg and 32kg, whose controls are LC or LP or CC. 3) Machines with capacity between 13kg and 32kg, whose controls are IC.

Manufacturer:

Girbau S.A.

Company Name

Girbau S.A.

Address

Carretera de Manlleu, KM 1, 08500 VIC (Barcelona)

Country

Spain

View All Listings by this Company

Range of commercial washing machines with flow controlled by solenoid valves and discharged via type AB air gap assembly (verified by test - suitable for backflow protection against fluid category 5). The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5 Bar. Maximum operating temperature 60°C.

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

240102709

Expiry date:

31/01/2029

Size:

Stainless steel braided silicone lined flexible hose assemblies with 3/4" BSP captive nut end connections.

Marking:

Renzacci on front panel, Renzacci, model, product info on data plate on rear panel

Installation Requirements:

R001 R160

Model:

HS9, HS11, HS13, HS18, HS24, HS28, HS35 LX16, LX16 E-SPEED, LX22, LX22 E-SPEED, LX35, LX35 E-SPEED SX11, SX11 E-SPEED, SX14, SX14 E-SPEED, SX16, SX16 E-SPEED, SX22, SX22 E-SPEED, SX35, SX35 E-SPEED WB25, WB35 LX55, LX55 E-SPEED HS, LX, LX E-SPEED, SX, SX E-SPEED models are single door with front loading WB models are double door barrier with side loading.

Manufacturer:

Renzacci SPA – Industria Lavatrici

Company Name

Renzacci SPA – Industria Lavatrici

Address

Via Morandi, 13 - 06012 Citta Di Castello PG Italy

View All Listings by this Company