Water Regulations Approval Scheme Ltd

Valves

Section Code 2348 : Balancing.

WRAS Approval Number: #2004041

Range of double regulating valves with bronze bodies, DZR brass discs, EPDM `O`-rings and PTFE disc face. The valves incorporate a non-rising spindle headwork regulating the flow and isolation function. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 2004041
Expiry date:: 30/04/2025
Marking:: Crane on cap. Crane, PN, size and flow arrow on body.
Installation Requirements:: R001
Model:: D921 sizes 1/2", 3/4", 1", 1.1/4", 1.1/2", 2" - Sizes 1" to 2" taper threaded to BS EN 10266, 1/2" and 3/4" to ISO 228 Parallel. D921AT (American Thread variant) sizes 1/2", 3/4", 1", 1.1/4", 1.1/2", 2" threaded to ANSI B1.20.1 D921.PF (Press Fit variant) size range 1/2"x15mm, 1/2"x18mm, 3/4"x22mm, 1"x28mm, 1.1/4"x35mm, 1.1/2"x42mm, 2"x54mm. D923 (Low Flow) sizes 1/2"only to ISO 228 Parallel D923AT (Low Flow - American thread) sizes 1/2" only threaded to ANSI B1.20.1. D923.PF (Low flow press fit variant) size range 1/2"x15mm and 1/2"x18mm. D931.PF (Press Fit variant) size range 1/2"x15mm, 1/2"x18mm, 3/4"x22mm, 1"x28mm, 1.1/4"x35mm, 1.1/2"x42mm, 2"x54mm. D931AT- sizes 1/2", 3/4", 1", 1.1/4", 1.1/2", 2" - threaded to ANSI B1.20.1. D933 (low flow) - sizes 1/2" to ISO 228 Parallel. D933.PF (Low flow press fit variant) size range 1/2"x15mm and 1/2"x18mm. D933AT- size 1/2" threaded to ANSI B1.20.1. D934 (ultra-low flow) - sizes 1/2" to ISO 228 Parallel. D934AT - sizes 1/2" - Threaded to ANSI B1.20.1. D934.PF (Ultra Low flow press fit variant) size range 1/2"x15mm and 1/2"x18mm. Press fit variants using BS EN 1057 R250 half hard copper pipe and Geberit Mapress stainless steel pipe.
Factor:: Crane Ltd

Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Phone
01473 277 364
General Email
bwiggins@crane-ltd.co.uk

View All Listings by this Company

WRAS Approval Number: #2005040

Range of manually operated balancing valves (DZR Brass) with a non-rising spindle balancing mechanism, DZR brass discs and EPDM gasket & ‘O’-rings. Maximum working pressure 20.0 bar. Maximum operating temperature 99ºC.

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 2005040
Expiry date:: 31/05/2025
Note:: The only difference between Lowflow ½” & ½” is the orifice of the valve, Lowflow ½” has a 10mm orifice while ½” has a 14mm orifice.
Size:: See model
Marking:: VIR Logo (VIR in a square) on Cap. VIR Logo, Size, Flow Arrow & CR Mark on Body.
Installation Requirements:: R001
Model:: FIG.9525 Lowflow ½”, ½”, ¾” & 1”. (BSP F) FIG.9535 Lowflow ½”, ½”, ¾” & 1”. (BSP F) FIG.9522 Lowflow ½”, ½” & ¾”. (BSP F)
Manufacturer:: Taizhou VIR Valve Manufacturing Co., Ltd

Company Name
Taizhou VIR Valve Manufacturing Co., Ltd
Address
Building 3, 1st Standard Workshop, Yuhuan Xuanmen Industry
Country
Taizhou,

View All Listings by this Company

WRAS Approval Number: #2004315

Range of manually operated balancing valves with DZR brass bodies incorporating a PTFE disc seal, EPDM 'O’-rings and seal. The product also incorporates a spherical valve with EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C. (marking 110ºC)

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 2004315
Expiry date:: 30/04/2025
Size:: See model
Marking:: Caleffi & flow arrow on body. Flow arrow & Caleffi on foam cover.
Installation Requirements:: R001
Model:: 132402: ½" BSP (F). 132512: ¾" BSP (F) 132522: ¾" BSP (F). 132602: 1" BSP (F). 132702: 1¼" BSP (F). 132802: 1½"BSP (F). 132902: 2" BSP (F).
Manufacturer:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Country
Italy
Phone
+39 0322 8491

View All Listings by this Company

WRAS Approval Number: #2010041

Range of double regulating valves with bronze bodies, PTFE disc face and orifice plate, and EPDM rubber ‘O’-rings with thermostatic control elements and a manually adjustable flow control valve. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 2010041
Expiry date:: 31/10/2025
Size:: 1/2", 3/4", 1", 1.1/4", 1.1/2" (all BSP female threaded) Sizes 1/2" and 3/4" to ISO 228 Parallel Sizes 1" to 2" taper threaded to BS EN 10266, Size added April 2022: 2” BSP (F)
Marking:: CRANE, PN, size and flow arrow on body. CRANE on cap. CRANE and MAX/WRAS temperature on adhesive label on cap.
Installation Requirements:: R001
Model:: D931 (1/2” to 2”)
Manufacturer:: Crane Ltd

Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Phone
01473 277 364

View All Listings by this Company

WRAS Approval Number: #2012318

Range of manually operated balancing valves incorporating bronze bodies, non-rising spindle balancing mechanism, EPDM washer & ‘O’-rings with either a metal or rubber seat. Maximum working pressure 25.0 bar. Maximum operating temperature 85ºC.

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 2012318
Expiry date:: 31/12/2025
Size:: See model
Marking:: Ningbo Huacheng logo, model no, flow arrow, size, PN, date of manufacture (MMYY).
Installation Requirements:: R001
Model:: L101 Metal seated: ½”, ¾” BSP (M) inlet/outlet connection. Rubber seated: 1”, 11/4”, 11/2” & 2” BSP (M) inlet/outlet connection.
Factor:: Ningbo Huacheng Valve Co Ltd

Company Name
Ningbo Huacheng Valve Co Ltd
Address
103# East Road of the Station Huangtan Town Ninghai County,Ningbo City, ZHEJIANG Provice, China

View All Listings by this Company

WRAS Approval Number: #2104002

Range of one way and two way manually operated needle valves incorporating brushed stainless steel bodies, rising spindle balancing mechanism and EPDM ‘O’-rings with a metal seat. Maximum working pressure 25.0 bar. Cold water use only.

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 2104002
Expiry date:: 30/04/2026
Size:: ⅜” BSP (F) X ⅜” BSP (M)
Marking:: ACMO + model on adhesive label on body.
Installation Requirements:: R001
Model:: NV/OW/304/3/8” NV/TW/304/3/8”
Factor:: AC.MO SRL

Company Name
AC.MO SRL
Address
Via T. Da Modena 28, 31056 Roncade (TV)
Country
Italy

View All Listings by this Company

WRAS Approval Number: #2103336

‘Series 116’ range of automatic thermal balancing valves (DZR Brass) with non-rising spindle headwork, brass disc and EPDM seals. Some models can be supplied with a thermometer (see model). The outlet of the 116144, 116154, 116244 & 116254 models (added January 2024) incorporate a check valve cartridge, verified by test (suitable for backflow protection against fluid category 2). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 2103336
Expiry date:: 31/03/2026
Size:: See model
Marking:: Caleffi, CR, flow arrow and PN rating on body.
Installation Requirements:: R001
Model:: Series 116 balancing valves: 116140: ½” BSP (F). 116150: ¾” BSP (F). 116160: 1” BSP (F). 116170: 1 ¼” BSP (F). 116240: ½” BSP (F). 116250: ¾” BSP (F). 116260: 1” BSP (F). 116270: 1 ¼” BSP (F). 116415: 15mm compression. 116420: 22mm compression. 116440: ½” BSP (F). 116441: ½” BSP (F) with thermometer. 116450: ¾” BSP (F). Model added January 2024: 116451: ¾” BSP (F) with thermometer. 116144: ½” BSP (M). 116154: ¾” BSP (M). 116244: ½” BSP (M) with thermometer. 116254: ¾” BSP (M) with thermometer.
Manufacturer:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Country
Italy
Phone
+39 0322 8491

View All Listings by this Company

WRAS Approval Number: #2001379

Range of either fixed or variable balancing valves with DZR brass bodies EPDM rubber ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 2001379
Expiry date:: 31/01/2025
Size:: see model
Marking:: SHIELD, FLOW ARROW
Installation Requirements:: R001
Model:: SD- 9787: ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (F).
Factor:: SHIELD FIRE SAFETY & SECURITY LTD

Company Name
SHIELD FIRE SAFETY & SECURITY LTD
Address
Unit 3, Endeavour Drive Basildon- Essex
Postcode
SS14 3WF
Country
United Kingdom
Phone
+44 (0) 1708 377731
General Email
info@shieldglobal.com

View All Listings by this Company

WRAS Approval Number: #1909426

‘Boss’ range of regulating valves with brass bodies, PTFE sliding washer, EPDM rubber ‘O’-rings and two test ports. Models are available with different flow rates depending on variant. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 1909426
Expiry date:: 30/09/2024
Size:: See model
Marking:: BOSS VENTURI ON OPERATING MEMBER DN, DR, PN & FLOW ARROW ON BODY
Installation Requirements:: R001
Model:: ‘Boss’ range of regulating valves: BOSS 900SUL 15 Venturi ULF 1/2“UL BOSS 900SL DN15 Venturi Low FxF 1/2“SL BOSS 900SS DN15 Venturi FxF 1/2“SS BOSS 900SL DN20 Venturi FxF 3/4”SL BOSS 900SS DN20 Venturi FxF 3/4”SS BOSS 900SS DN25 Venturi FxF 1”SS BOSS 900SH DN32 Venturi FxF 1¼" SH BOSS 900SH DN40 Venturi FxF 1 ½"SH BOSS 900SH DN50 Venturi FxF 2”SH Where UL = ultra low flow, SL = low flow, SS = standard flow, SH high flow.
Factor:: BSS Industrial

Company Name
BSS Industrial
Address
BOSS Court 7 Barton Close Grove Park
Postcode
LE19 1SJ
Country
United Kingdom

View All Listings by this Company

WRAS Approval Number: #2012372

Section:: 2348 Valves
Section Subtitle:: Balancing.
WRAS Approval Number:: 2012372
Expiry date:: 31/12/2025
Size:: See model
Marking:: FIVC LOGO, SIZE & PN ON BODY FIVC LOGO & WRAS ON OPERATING MEMBER
Installation Requirements:: R001
Model:: 2L104 FSBXXXO25GF21 Metal seated: ½”, ¾” BSP (M) inlet/outlet connection. Rubber seated: 1”, 11/4”, 11/2” & 2” BSP (M) inlet/outlet connection.
Factor:: FlowCon International Valve Company (FIVC)

Company Name
FlowCon International Valve Company (FIVC)
Address
Trafikcenter Alle 17, DK-4200 Slagelse, Denmark
Phone
+45 2912 4363
General Email
mt@flowconivc.com

View All Listings by this Company