Dutypoint ‘VMV’ range of cold water supply booster sets, incorporating 2 to 8 pumps with a modular stainless steel manifold system. VMV2, VMV3 and VMV4 pump sets are available with DN80 to DN150 manifolds depending on application. VMV5, VMV6, VMV7 and VMV8 pump sets are available with DN150 to DN200 manifolds, depending on application. The product incorporates gate valves on the suction and discharge manifolds, and non-return valves, expansion vessels, isolation valves, a pressure gauge and transducers on the discharge manifold. Maximum working pressure 16.0 bar. Cold water supply only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

1905080

Expiry date:

31/05/2024

Size:

Flanged manifold connections on suction and discharge manifolds Sizes 80mm to 200mm

Marking:

Dutypoint, model number and technical information on adhesive label on control box.

Installation Requirements:

R001 R415

Model:

VMV(i)-(ii)-(iii)(iv) Where: (i) = Number of pumps 2-8 (ii) = Nominal Flow Rate (l/sec) (iii) = Pump/Inverter Manufacturer denoted by the letter V or H, (iv) = Motor size (kWx10) As an example: VMV2-15-V110 Number of pumps = 2 Nominal flowrate (l/sec) = 15 Pump inverter manufacturer = V for Vasco, H for Hydrovar Motor size (kW x 10)

Manufacturer:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Olympus Park, Quedgeley Gloucestershire

Postcode

GL2 4DH

View All Listings by this Company

`Monsoon` range of universal single & twin, shower booster pumps with brass bodies, brass impellers and nitrile seals. Pumps incorporate an anti-surge device, flow switch and a pressure vessel. The outlets incorporate isolation valves, plastic strainers and approved single check valve cartridges however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection. Models 46414, 46498, 46413, 46505, 46411, and 46412: maximum working pressure 6.0 bar Model 46410: maximum working pressure 3.0 bar. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

1906076

Expiry date:

30/06/2024

Note:

Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.

Size:

Stainless steel braided EPDM lined hoses with 22mm push fit female inlet/outlet connections incorporating Isolation valve. ROI Models - Stainless steel braided EPDM lined hoses with 21mm push fit female inlet/outlet connections incorporating Isolation valve. EXP Models - Stainless steel braided, EPDM lined hoses with ¾” captive nut x ¾” BSP (F) connections

Marking:

Stuart Turner on adhesive label.

Installation Requirements:

R001 R120 R415

Model:

Monsoon U1.5 bar Twin 46505 Monsoon U2.0 bar Single 46498 Monsoon U2.0 bar Twin 46480 Monsoon U4.5 bar Single 46414 Monsoon U3.0 bar Single 46413 Monsoon U4.55 bar Twin 46412 Monsoon U4.0 bar Twin 46411 Monsoon U3.0 bar Twin 46410 Monsoon U3.0 bar Twin 44427 Monsoon U2.0 bar Twin 44426 Monsoon U2.0 bar Single 44425 Monsoon U2.0 bar Twin, OEM 44340 Monsoon U1.5 bar Twin, 44753 Monsoon U1.5 bar Twin 46505ROI Monsoon U2.0 bar Single 46498ROI Monsoon U2.0 bar Twin 46480ROI Monsoon U4.5 bar Single 46414ROI Monsoon U3.0 bar Single 46413ROI Monsoon U4.5 bar Twin 46412ROI Monsoon U4.0 bar Twin 46411ROI Monsoon U3.0 bar Twin 46410ROI Monsoon U1.5 bar Twin 46505EXP Monsoon U2.0 bar Single 46498EXP Monsoon U2.0 bar Twin 46480EXP Monsoon U4.5 bar Single 46414EXP Monsoon U3.0 bar Single 46413EXP Monsoon U4.5 bar Twin 46412EXP Monsoon U4.0 bar Twin 46411EXP Monsoon U3.0 bar Twin 46410EXP

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley on Thames Oxon

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

View All Listings by this Company

Range of multistage centrifugal pumps with stainless steel bodies and impellers. Maximum working pressure 25.0 bar. Maximum operating temperature 100ºC.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

1906092

Expiry date:

30/06/2024

Marking:

KQ on body. KQ, model, date of manufacture (YYYY/MM) & Shanghai Kaiquan Pumps on data label.

Installation Requirements:

R001 R415

Model:

KQDQ40-10C – DN40 flanged inlet and outlet. KQDQ50-12C – DN50 flanged inlet and outlet. KQDQ50-15C – DN50 flanged inlet and outlet. KQDQ50-20C – DN50 flanged inlet and outlet. KQDQ65-32C – DN65 flanged inlet and outlet.

Manufacturer:

Shanghai Kaiquan Pump (Group) Co. Ltd.

Company Name

Shanghai Kaiquan Pump (Group) Co. Ltd.

Address

View All Listings by this Company

Range of multistage close coupled centrifugal pumps incorporating 304 or 316 stainless steel cased bodies and impellers. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

1906314

Expiry date:

30/06/2024

Size:

1” BSP (F) - 3” BSP (F). DN50 - DN80 flange.

Marking:

Calpeda, model, and other technical information on adhesive label on motor housing.

Installation Requirements:

R001 R415

Model:

MXH Series: (304 stainless models) MXH/MXHM 202, 203, 204, 205, 206. MXH/MXHM 402, 403, 404, 405, 406. MXH/MXHM 802, 803, 804, 805. MXH/MXHM 1602, 1603, 1604, 1605, 1606. MXH/MXH-F 2001, 2002, 2003, 2004, 2005. MXH/MXH-F 3201, 3202, 3203, 3204. MXH/MXH-F 4801, 4802, 4803. (316 stainless models) MXHL/MXHLM 202, 203, 204, 205, 206. MXHL/MXHLM 402, 403, 404, 405, 406. MXHL/MXHLM 802, 803, 804, 805. A letter may be added at the end of the pump model to identify the current motor model fitted to the pump e.g. MXH203* where * can be E, /A, /B, /C etc. Example MXH203/A, MXH204/B etc.

Manufacturer:

Calpeda S.p.A

Company Name

Calpeda S.p.A

Address

Via Roggia Di Mezzo 39 36050 Montoro Vicentino Vicenza

Country

Italy

View All Listings by this Company

Range of multi-stage pumps with stainless steel bodies (PVMX models) or black coated cast iron bodies (PVM models), stainless steel impellers, EPDM gaskets and seals. Maximum working pressure: Cast iron body round or oval flange: DN25-32 = 25.0 bar, DN40 = 16.0 bar. Stainless steel body round flange: DN40-50 = 16.0 bar (PVMX-10 (stages 1-16), PVMX-15 (stages 1-10), PVMX-20 (stages 1-10). DN25-50 = 25.0 bar (PVMX-1 (stages 2-36), PVMX-3 (stages 2-36), PVMX-5 (stages 2-36), PVMX-10 (stages 17-22), PVMX-15 (stages 12-17), PVMX-20 (stages 12-17). DN65 = 16.0 bar (PVMX-32 (stages (1-1)-7), 30.0 bar (PVMX-32 (stages (8-2)-14). Stainless steel body Victaulic connection: DN32 = 25.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

1906096

Expiry date:

30/06/2024

Size:

(Number in brackets denotes Nominal Flow m³/h) PVM F Range Size: Round Flange available in sizes DN25 & DN32 (01, 03 & 05), DN40 (10). PVM A Range Size: Oval Flange available in sizes DN25 & DN32 (01, 03 & 05), DN40 (10). PVMX F Range Size: Round Flange available in sizes DN25 & DN32 (01, 03 & 05), DN40 (10), DN50 (15 & 20), DN65 (32). PVMX V Range Size: Victaulic Connection available in size R1¼ DN32 (01, 03 & 05).

Marking:

Pentair Logo, model, PN, maximum temperatures and product information on adhesive label on body. Flow arrow on body.

Installation Requirements:

R001 R415

Model:

PVM F Range – Cast Iron Body, Round Flanges. PVM A Range – Cast Iron Body, Oval Flanges. PVMX F Range – Stainless Steel Body, Round Flanges. PVMX V Range – Stainless Steel Body, Victaulic Connections. Key: NAME x-y(-z) C P M Frq (Model Code for Key, explained below) NAME = Model (PVM or PVMX) x = Nominal Flow m³/h y = Number of Stages z = Reduced Diameter Stages (Part of total if any, supressed if 0) C = Connection Type (F = Round Flanges, A = Oval Flanges, V = Victaulic Connections) P = Phases (T or 3/400/690 or 3x230/400 = Three Phase, M or 1x230 = Single Phase) M = Motor Efficiency (IE1, IE2 or IE3) Frq = Frequency (50 = 50Hz, 6- = 60Hz) E.g. PVMX-15-4-F-T-IE2-50

Factor:

Pentair International S.a.r.l.

Company Name

Pentair International S.a.r.l.

Address

Avenue de Sévelin 20, CH - 1004 Lausanne

Country

Switzerland

View All Listings by this Company