Water Regulations Approval Scheme Ltd

Miscellaneous Fittings

Section Code 1530 :

WRAS Approval Number: #240206001

Range of stainless steel bodied mechanical pump shaft seals. The 491 model comprises of carbon and silicone carbide seal faces and EPDM ‘O’-rings. The 1510 model comprises of carbon and silicone carbide seal faces, EPDM ‘O’-rings and an orange NBR/aramid fibre gasket. Maximum operating temperature 100°C.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 240206001
Expiry date:: 28/02/2029
Size:: 491: 16 - 110mm. 1510: 25 - 120mm.
Marking:: 491: Chesterton on body. 1510: Chesterton on tabs.
Installation Requirements:: R001
Model:: 491 - Chesterton 491 DINS-DINL rotary internal single seal. 1510 - Chesterton 1510 General Duty Single Cartridge Seal with orange NBR/aramid fibre Gasket.
Factor:: Chesterton International GmbH

Company Name
Chesterton International GmbH
Address
Am Lenzenfleck 23, DE-85737 Ismaning
Country
Germany

View All Listings by this Company

WRAS Approval Number: #240202720

Range of self-acting controllers with brass bodies, EPDM O rings and gaskets. Maximum working pressure 16.0 Bar Maximum operating temperature of the secondary circuit is 65˚C and the primary circuit is 99˚C

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 240202720
Expiry date:: 31/03/2029
Size:: Primary ¾” BSP captive nut inlet and ¾” BSP (M) outlet, Secondary ¾” BSP (M) inlet and ¾” BSP captive nut outlet.
Marking:: Danfoss label on body, model number, production date (WW/YY), pressure rating on body.
Model:: PTC2+p IHPT PM2+p.
Manufacturer:: Danfoss A/S

Company Name
Danfoss A/S
Address
Nordborgvej 81 6430 Nordborg
Country
Denmark
Phone
+74 88 22 22

View All Listings by this Company

WRAS Approval Number: #240202721

Range of flow-compensated (thermostatic) temperature controllers incorporating a brass body with EPDM ‘O’-rings and gaskets. The valves incorporate a non-rising spindle headwork for temperature regulation. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 240202721
Expiry date:: 31/03/2029
Size:: ¾" BSP captive nut inlets x ¾” BSP (M) outlets
Marking:: Danfoss logo, PN, sales number and date of manufacture WWYY on body.
Installation Requirements:: R001
Model:: IHPT 2.0 003L3651 (Thermostatic controller IH90 size DN15), IHPT 2.0 003L3653 (Thermostatic controller IH180 size DN15).
Manufacturer:: Danfoss A/S

Company Name
Danfoss A/S
Address
Nordborgvej 81 6430 Nordborg
Country
Denmark
Phone
+74 88 22 22

View All Listings by this Company

WRAS Approval Number: #240402050

Range of concealed rough-in sets with brass bodies, intended for use in conjunction with trim and finish sets. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 240402050
Expiry date:: 30/04/2029
Size:: ½” BSP (F)
Marking:: Axor on adhesive label
Installation Requirements:: R001 R040
Model:: 13 129 180 45 442 180 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company

WRAS Approval Number: #240402065

Range of submersible pressure sensors and hydrostatic transmitters (supplied in lengths up to 1000m). Cold water use only.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 240402065
Expiry date:: 30/04/2029
Size:: Ø22mm or 32mm (see model).
Marking:: VEGA, VEGAWELL 52, model number and other product information on label connected to cable.
Installation Requirements:: R001
Model:: VEGAWELL 52 WL52.XX α A β γ I δ ε ζ X Where: XX :- Approval Blank/without (not applicable to model seeking WRAS approval). α :- Fastening / Material X4 :- Without GE :- Adjustable screw connection for suspension cable G¾ PN3, ISO228-1 / 316L. GC :- Adjustable screw connection for suspension cable G1 PN3, ISO228-1 / 316L. GD :- Adjustable screw connection for suspension cable 1NPT PN3, ASME B1.20.1 / 316L. GA :- Adjustable screw connection for suspension cable G1½ PN3, ISO228-1 / 316L. GB :- Adjustable screw connection for suspension cable 1½NPT PN3, ASME B1.20.1 / 316L. Version / Process temperature A :- Suspension cable PE / -20...+60°C β :- Length of suspension cable K :- 6m PE suspension cable. L :- 12m PE suspension cable. M :- 27m PE suspension cable. T :- Individually selected length PE suspension cable. γ :- Transmitter material / Diameter V :- 316l / 22mm. D :- Duplex (1.4462) / 32mm. Sealing concept / Wetted seal I :- Double / EPDM (A+P 70.10-02) δ :- Measuring rate A :- rel. / 0 … +0.1 bar (0 … + 10kPa). B :- rel. / 0 … +0.2 bar (0 … + 20kPa). C :- rel. / 0 … +0.4 bar (0 … + 40kPa). D :- rel. / 0 … +1.0 bar (0 … + 100kPa). E :- rel. / 0 … +2.5 bar (0 … + 250kPa). F :- rel. / 0 … +5.0 bar (0 … + 500kPa). G :- rel. / 0 … +10 bar (0 … + 1,000kPa). H :- rel. / 0 … +25 bar (0 … + 2,500kPa). ε :- Electronics C :- Two-wire 4…20mA. D :- Two-wire 4…20mA/HART + Four-wire PT100. ζ :- Accuracy class 1 :- 0.2%, 2 :- 0.1%. Transmitter option X :- without.
Manufacturer:: VEGA Grieshaber KG

Company Name
VEGA Grieshaber KG
Address
Am Hohenstein 113 77761 Schiltach
Country
Germany

View All Listings by this Company