Range of end feed copper fittings for use with copper tube to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208820

Expiry date:

31/08/2027

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Model:

659811 JET REDUCER 67X28mm, 659812 JET REDUCER 67X35mm, 659813 JET REDUCER 67X42mm, 659814 JET REDUCER 67X54mm, 659815 JET REDUCER 76X35mm, 659816 JET REDUCER 76X42mm, 659817 JET REDUCER 76X54mm, 659818 JET REDUCER 76X67mm, 659819 JET REDUCER 108X42mm, 659820 JET REDUCER 108X54mm, 659821 JET REDUCER 108X67mm, 659822 JET REDUCER 108X76mm 659833 JET STRAIGHT COUPLING 67mm, 659834 JET STRAIGHT COUPLING 76mm, 659835 JET STRAIGHT COUPLING 108mm, 659838 JET REDUCED TEE 67X67X28mm, 659839 JET REDUCED TEE 67X67X35mm, 659840 JET REDUCED TEE 67X67X42mm, 659841 JET REDUCED TEE 67X67X54mm, 659842 JET REDUCED TEE 76X76X28mm, 659843 JET REDUCED TEE 76X76X35mm, 659844 JET REDUCED TEE 76X76X42mm, 659845 JET REDUCED TEE 76X76X54mm, 659846 JET REDUCED TEE 108X108X35mm, 659847 JET REDUCED TEE 108X108X54mm, 659848 JET REDUCED TEE 108X108X76mm, 659853 JET EQUAL TEE 67mm, 659854 JET EQUAL TEE 76mm, 659855 JET EQUAL TEE 108mm 659858 JET STOP END 67mm, 659859 JET STOP END 76mm, 659860 JET STOP END 108mm 659863 JET 90D ELBOW 67mm, 659864 JET 90D ELBOW 76mm, 659865 JET 90D ELBOW 108mm, 659868 JET 45D ELBOW 67mm, 659869 JET 45D ELBOW 76mm, 659870 JET45D ELBOW 108mm, 659927 JET 45D STREET ELBOW 67mm, 659928 JET 45D STREET ELBOW 76mm, 659929 JET 90D LONG RADIUS BEND 67mm, 659930 JET 90D LONG RADIUS BEND 76mm, 659931 JET 90D LONG RADIUS BEND 108mm 659873 * JET BRAZING FEMALE IRON ADAPTOR 76X3 659874 * JET BRAZING FEMALE IRON ADAPTOR 108X4 659875 * JET BRAZING MALE IRON ADAPTOR 67X2.1/2 659876 * JET BRAZING MALE IRON ADAPTOR 76X3 659877 * JET BRAZING MALE IRON ADAPTOR 108X4 659926 * JET BRAZING FEM IRON ADAPTOR 67X21.1/2

Factor:

Wolseley UK

Company Name

Wolseley UK

Address

K2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Phone

01926 705792

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co Ltd

Company Name

Zhejiang Hailiang Co Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Range of end feed brass fittings for use with copper tube (manufactured to EN 1057). Incorporates an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211827

Expiry date:

30/11/2027

Size:

End feed: 15mm-54mm

Marking:

Lawton Tubes Logo & Size on body.

Installation Requirements:

R001

Model:

N3015 CORE 15MM X 1/2" MALE ADAPTOR BRASS N3022 CORE 22MM X 3/4" MALE ADAPTOR BRASS

Factor:

The Lawton Tube Company Ltd.

Company Name

The Lawton Tube Company Ltd.

Address

Torrington Avenue, Tile Hill, Coventry

Postcode

CV4 9AB

Phone

+44 24 7646 6203 or 024 7646 6203

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. The HLDPMFWT and HLDPMFZT models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208822

Expiry date:

31/08/2027

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

Lawton Tubes Log & size on body.

Installation Requirements:

R001

Model:

N12015 CORE 15MM X 90 DEGREE ELBOW EF N12022 CORE 22MM X 90 DEGREE ELBOW EF N24015 CORE 15MM EQUAL TEE EF N1015 CORE 15MM COUPLER EF N1022 CORE 22MM COUPLER EF N12028 CORE 28MM X 90 DEGREE ELBOW EF N6022015 CORE 22MM X 15MM FITTING REDUCER EF N24022 CORE 22MM EQUAL TEE EF N25022015 CORE 22MM X 22MM X 15MM REDUCER TEE EF N12S015 CORE 15MM X 90 DEGREE STREET ELBOW EF N1028 CORE 28MM COUPLER EF N61015 CORE 15MM END CAP EF N6028022 CORE 28MM X 22MM FITTING REDUCER EF N26022015022 CORE 22MM X 15MM X 22MM REDUCER TEE EF N12035 CORE 35MM X 90 DEGREE ELBOW EF N12S022 CORE 22MM X 90 DEGREE STREET ELBOW EF

Factor:

Lawton Tube Company Limited.

Company Name

Lawton Tube Company Limited.

Address

Torrington Avenue Tile Hill Coventry

Postcode

CV4 9AB

View All Listings by this Company

Range of end feed copper solder fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112370

Expiry date:

31/12/2026

Size:

see models

Marking:

Valtech on body.

Installation Requirements:

R001

Model:

CSF28 90°Elbow Close Ruff C×C (8,10,12,15,22,28,35,42,54mm) CSF29 90°Street Elbow Close Ruff Ftg×C (8,10,12,15,22,28,35,42,54mm) CSF38 Reducing 90° Elbow C×C ( 22×15, 28×22, 28×15) CSF30 45°Elbow C×C(8,10,12,15,22,28,35,42,54mm) CSF39 45°Elbow FTG×C(8,10,12,15,22,28,35,42,54mm) CSF31 Equal Tee C×C×C(8,10,12,15,22,28,35,42,54mm) CSF32 Reducing TEE C×C×C (15×15×10, 15×15×12, 15×15×22, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28×15×28, 28×15×22,28×15×15, 35×35×28, 35×35×22, 35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42,54×54×35, 54×54×28, 54×54×22, 54×54×15) CSF23 Equal Coupling C×C (8,10,12,15,22,28,35,42,54mm) CSF25 Reducing Coupling C×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF26 Fitting Reducer Ftg×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF27 Tube Cap (8,10,12,15,22,28,35,42,54mm) CSF33 Cross Over Coupling C×C(15,22mm) CSF40 Partial Cross Over Ftg×C (15,22mm) CSF34 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF35 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF07 90°Elbow Close Ruff C×C (6,8,10,12,15,22,28,35,42,54mm) CSF08 90°Street Elbow Close Ruff Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF41 Reducing 90° Elbow C×C (12×10, 12×8, 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28,42x22,54×42, 54×35, 54×28) CSF10 45°Elbow C×C(6,8,10,12,15,22,28,35,42,54mm) CSF11 45°Elbow FTG×C(6,8,10,12,15,22,28,35,42,54mm) CSF42 90°Elbow Long Turn C×C 6,8,10,12,15,22,28,35,42,54mm) CSF43 90°Street Elbow Long Turn Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF13 Equal Tee C×C×C(6,8,10,12,15,22,28,35,42,54mm) CSF45 Reducing TEE C×C×C (6x6x8, 8×8×6, 10×10×15, 12×12×10, 12×12×8, 12×10×10, 12×8×8, 15×15×22, 15×15×12,15×15×10, 15x15x8, 15×12×15, 15×12×12, 15×12×10, 15×12×8, 15x10x15, 15x10x10, 22×22×28, 22×22×15, 22×22×12, 22×15×22,22×15×15, 22×15×12,28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28x15x28, 28x15x22, 28×15×15,35×35×28, 35×35×22, 35×35×15,35×28×35, 35×28×28, 35×28×22, 35×22×35, 35×22×28, 35×22×22, 35×15×35, 42×42×35,42×42×28, 42×42×22, 2x42x15, 42×35×42, 42×28×42, 42×22×42, 54×54×42, 54×54×35, 54×54×28, 54×54×22,54×54×15,54×42×54, 54×35×54) CSF01 Equal Coupling C×C (6,8,10,12,15,22,28,35,42,54mm) CSF04 Reducing Coupling C×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF05 Fitting Reducer Ftg×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15,28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF16 Tube Cap (6,8,10,12,15,22,28,35,42,54mm) CSF46 Return Bend C×C(6,8,10,12,15,22,28,35,42,54mm) CSF14 Cross Over Coupling C×C(15,22mm) CSF15 Partial Cross Over Ftg×C (15,22mm) CSF21 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF19 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”)

Factor:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of copper end feed solder fittings for use with copper tube (EN1057). For above and below ground use. Maximum working pressure for sizes 8mm to 54mm is 25.0 bar. Maximum working pressure for sizes above 54mm is 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309041

Expiry date:

30/09/2028

Size:

See models

Marking:

Size and Howhi’s logo on fitting body

Installation Requirements:

R001

Model:

Coupling (rolled stop): 100EN08AB - 8mm, 100EN10AB - 10mm, 100EN12AB - 12mm, 100EN15AB - 15mm, 100EN22AB - 22mm, 100EN28AB - 28mm, 100EN35AB - 35mm, 100EN42AB - 42mm, 100EN54AB - 54mm, 100EN67AB - 67mm, 100EN76AB - 76mm 100EN108AB - 108mm. Reducing Coupling: 101EN1008AB - 10 x 8mm, 101EN1210AB - 12 x 10mm, 101EN1508AB - 15 x 8mm, 101EN1510AB - 15 x 10mm, 101EN1512AB - 15 x 12mm, 101EN2215AB - 22 x 15mm, 101EN2815AB - 28 x 15mm, 101EN2822AB - 28 x 22mm, 101EN3522AB - 35 x 22mm, 101EN3528AB - 35 x 28mm, 101EN4222AB - 42 x 22mm, 101EN4235AB - 42 x 35mm, 101EN4228AB - 42 x 28mm, 101EN5428AB - 54 x 28mm, 101EN5435AB - 54 x 35mm, 101EN5442AB - 54 x 42mm, 101WE1512AB - 15mm x ½”, 101WE2221AB - 22mm x ¾” 101WE2825AB - 28mm x 1”. Fitting Reducer (M/F): 102EN1008AB - 10 x 8mm, 102EN1208AB - 12 x 8mm, 102EN1210AB - 12 x 10mm, 102EN1508AB - 15 x 8mm, 102EN1510AB - 15 x 10mm, 102EN1512AB - 15 x 12mm, 102EN2210AB - 22 x 10mm, 102EN2212AB - 22 x 12mm, 102EN2215AB - 22 x 15mm, 102EN2812AB - 28 x 12mm, 102EN2815AB - 28 x 15mm, 102EN2822AB - 28 x 22mm, 102EN3515AB - 35 x 15mm, 102EN3522AB - 35 x 22mm, 102EN3528AB - 35 x 28mm, 102EN4215AB - 42 x 15mm, 102EN4222AB - 42 x 22mm, 102EN4228AB - 42 x 28mm, 102EN4235AB - 42 x 35mm, 102EN5415AB - 54 x 15mm, 102EN5422AB - 54 x 22mm, 102EN5428AB - 54 x 28mm, 102EN5435AB - 54 x 35mm, 102EN5442AB - 54 x 42mm, 102EN6728AB - 67 x 28mm, 102EN6735AB - 67 x 35mm, 102EN6742AB - 67 x 42mm, 102EN6754AB - 67 x 54mm, 102EN7628AB - 76 x 28mm, 102EN7635AB - 76 x 35mm, 102EN7642AB - 76 x 42mm, 102EN7654AB - 76 x 54mm, 102EN7667AB - 76 x 67mm 102EN10854AB - 108 x 54mm. 90° ELBOW: 103EN08AB - 8mm, 103EN10AB - 10mm, 103EN12AB - 12mm, 103EN15AB - 15mm, 103EN22AB - 22mm, 103EN28AB - 28mm, 103EN35AB - 35mm, 103EN42AB - 42mm, 103EN54AB - 54mm, 103EN67AB - 67mm, 103EN76AB - 76mm & 103EN108AB - 108mm. 90° Street Elbow (M/F) 104EN08AB - 8mm, 104EN10AB - 10mm, 104EN12AB - 12mm, 104EN15AB - 15mm, 104EN22AB - 22mm, 104EN28AB - 28mm, 104EN35AB - 35mm, 104EN42AB - 42mm, 104EN54AB - 54mm, 104EN67AB - 67mm, 104EN76AB - 76mm 104EN108AB - 108mm. 90° Elbow (Long Radius): 105EN10AB - 10mm, 105EN12AB - 12mm, 105EN15AB - 15mm, 105EN18AB - 18mm, 105EN22AB - 22mm, 105EN28AB - 28mm, 105EN35AB - 35mm, 105EN42AB - 42mm, 105EN54AB - 54mm. 90° Street Elbow Long Turn (M/F): 106EN06AB - 6mm, 106EN08AB - 8mm, 106EN10AB - 10mm, 106EN12AB - 12mm, 106EN28AB - 28mm, 106EN35AB - 35mm, 106EN42AB - 42mm 106EN54AB - 54mm 45° Elbow: 107EN08AB - 8mm, 107EN10AB - 10mm, 107EN15AB - 15mm, 107EN22AB - 22mm, 107EN28AB - 28mm, 107EN35AB - 35mm, 107EN42AB - 42mm, 107EN54AB - 54mm, 107EN67AB - 67mm, 107EN76AB - 76mm 107EN108AB - 108mm. 45° Elbow (M/F): 108EN08AB - 8mm, 108EN10AB - 10mm, 108EN15AB - 15mm, 108EN22AB - 22mm, 108EN28AB - 28mm, 108EN35AB - 35mm, 108EN42AB - 42mm 108EN54AB - 54mm. Slip Coupling: 111EN15AB - 15mm, 111EN22AB - 22mm, 111EN28AB - 28mm, 111EN35AB - 35mm, 111EN42AB - 42mm 111EN54AB - 54mm. Equal Tee: 112EN08AB - 8mm, 112EN10AB - 10mm, 112EN12AB - 12mm, 112EN15AB - 15mm, 112EN22AB - 22mm, 112EN28AB - 28mm, 112EN35AB - 35mm, 112EN42AB - 42mm, 112EN54AB - 54mm, 112EN67AB - 67mm, 112EN76AB - 76mm & 112EN108AB - 108mm. Reducing Tee: 113EN080806AB - 8 x 8 x 6mm, 113EN101008AB - 10 x 10 x 8mm, 113EN121208AB - 12 x 12 x 8mm, 113EN121210AB - 12 x 12 x 10mm, 113EN151508AB - 15 x 15 x 8mm, 113EN151510AB - 15 x 15 x 10mm, 113EN151512AB - 15 x 15 x 12mm, 113EN222210AB - 22 x 22 x 10mm, 113EN222215AB - 22 x 22 x 15mm, 113EN282815AB - 28 x 28 x 15mm, 113EN282822AB - 28 x 28 x 22mm, 113EN353515AB - 35 x 35 x 15mm, 113EN353522AB - 35 x 35 x 22mm, 113EN353528AB - 35 x 35 x 28mm & 113EN424215AB - 42 x 42 x 15mm. Reducing Tee: 113EN424222AB - 42 x 42 x 22mm, 113EN424228AB - 42 x 42 x 28mm, 113EN424235AB - 42 x 42 x 35mm, 113EN545415AB - 54 x 54 x 15mm, 113EN545422AB - 54 x 54 x 22mm, 113EN545428AB - 54 x 54 x 28mm, 113EN545435AB - 54 x 54 x 35mm, 113EN545442AB - 54 x 54 x 42mm, 113EN676728AB - 67 x 67 x 28mm, 113EN676735AB - 67 x 67 x 35mm, 113EN676742AB - 67 x 67 x 42mm, 113EN676754AB - 67 x 67 x 54mm, 113EN767628AB - 76 x 76 x 28mm, 113EN767635AB - 76 x 76 x 35mm, 113EN767642AB - 76 x 76 x 42mm, 113EN767654AB - 76 x 76 x 54mm, 113EN767667AB - 76 x 76 x 67mm, 113EN10810854AB - 108 x 108 x 54mm, 113EN10810867AB - 108 x 108 x 67mm, 113EN10810876AB - 108 x 108 x 76mm, 114EN151010AB - 15 x 10 x 10mm, 114EN151015AB - 15 x 10 x 15mm, 114EN221515AB - 22 x 15 x 15mm, 114EN221522AB - 22 x 15 x 22mm, 114EN281515AB - 28 x 15 x 15mm, 114EN281522AB - 28 x 15 x 22mm, 114EN281528AB - 28 x 15 x 28mm, 114EN282215AB - 28 x 22 x 15mm, 114EN282222AB - 28 x 22 x 22mm, 114EN282228AB - 28 x 22 x 28mm, 114EN352222AB - 35 x 22 x 22mm, 114EN352235AB - 35 x 22 x 35mm, 114EN352815AB - 35 x 28 x 15mm, 114EN352822AB - 35 x 28 x 22mm, 114EN352828AB - 35 x 28 x 28mm, 114EN352835AB - 35 x 28 x 35mm, 114EN422828AB - 42 x 28 x 28mm, 114EN544242AB - 54 x 42 x 42mm, 114EN675467AB - 67 x 54 x 67mm, 115EN121215AB - 12 x 12 x 15mm, 115EN151522AB - 15 x 15 x 22mm, 115EN222228AB - 22 x 22 x 28mm 115EN282835AB - 28 x 28 x 35mm. Reducing 90° Elbow (short): 121EN2215AB - 22 x 15mm. Stop End: 137EN08AB - 8mm, 137EN10AB - 10mm, 137EN15AB - 15mm, 137EN22AB - 22mm, 137EN28AB - 28mm, 137EN35AB - 35mm, 137EN42AB - 42mm, 137EN54AB - 54mm, 137EN67AB - 67mm, 137EN76AB - 76mm 137EN108AB - 108mm. Full Crossover: 138EN15AB - 15mm 138EN22AB - 22mm. Partial Crossover (M/F): 148EN15AB - 15mm 148EN22AB - 22mm.

Manufacturer:

Zhuji City Howhi Air Conditioners Made Co Ltd

Company Name

Zhuji City Howhi Air Conditioners Made Co Ltd

Address

Donggong Village, Yangmeiqiao Community, Diankou Diankou Town, Zhuji City, Shaoxing City, Zhejiang Province, China

View All Listings by this Company