Range of end feed copper solder fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112302

Expiry date:

31/12/2026

Size:

see models

Marking:

Hengshen logo (HS) and size on body.

Installation Requirements:

R001

Model:

End feed fittings: 5090 (90°Elbow Close Ruff CxC) 6,8,10,12,15,22,28,35,42,54mm 5092 (90°Street Elbow Close Ruff) 6,8,10,12,15,22,28,35,42,54mm 5090R (Reducing 90° Elbow C×C) 12×10, 12×8, 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28,42x22,54×42, 54×35, 54×28; 5041 (45°Elbow C×C) 6,8,10,12,15,22,28,35,42,54mm 5040 (45°Elbow FTG×C) 6,8,10,12,15,22,28,35,42,54mm 5002A (90°Elbow Long TurnC×C) 6,8,10,12,15,22,28,35,42,54mm 5001A (90°Street Elbow Long Turn Ftg×C) 6,8,10,12,15,22,28,35,42,54mm 5130 (Equal Tee C×C×C) 6,8,10,12,15,22,28,35,42,54mm 5130R (Reducing TEE C×C×C) 6x6x8, 8×8×6, 10×10×15, 12×12×10, 12×12×8, 12×10×10, 12×8×8, 15×15×22, 15×15×12, 15×15×10, 15x15x8, 15×12×15, 15×12×12, 15×12×10, 15×12×8, 15x10x15, 15x10x10, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 22×15×12, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28x15x28, 28x15x22, 28×15×15, 35×35×28, 35×35×22, 35×35×15, 35×28×35, 35×28×28, 35×28×22, 35×22×35, 35×22×28, 35×22×22, 35×15×35, 42×42×35, 42×42×28, 42×42×22, 42x42x15, 42×35×42, 42×28×42, 42×22×42, 54×54×42, 54×54×35, 54×54×28, 54×54×22, 54×54×15,54×42×54, 54×35×54 5270 (Equal Coupling C×C) 6,8,10,12,15,22,28,35,42,54mm 5240 (Reducing Coupling C×C) 8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15 5243 (Fitting Reducer Ftg×C) 8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15 5301 (Tube Cap) 6,8,10,12,15,22,28,35,42,54mm 5060 (Return Bend C×C) 6,8,10,12,15,22,28,35,42,54mm 5085 (Cross Over Coupling C×C) 15, 22mm 5086 (Partial Cross Over Ftg×C) 15, 22mm 5062 (Straight Tap Connector C×FI) 15×1/2”, 15×3/4”, 22×3/4”, 22×1",28×1" 5063 (Bent Tap Connector C×FI) 15×1/2”, 15×3/4”, 22×3/4”, 22×1",28×1" Solder ring fittings: SR5090 (90°Elbow Close Ruff C×C) 8,10,12,15,22,28,35,42,54mm SR5092 (90°Street Elbow Close Ruff Ftg×C) 15,22,28mm SR5090R (Reducing 90° Elbow C×C) 22×15, 28×22, 28×15 SR5041 (45°Elbow C×C) 8,10,12,15,22,28,35,42,54mm SR5040 (45°Elbow FTG×C) 15,22,28mm SR5130 (Equal Tee C×C×C) 8,10,12,15,22,28,35,42,54mm SR5130R (Reducing TEE C×C×C) 15×15×10, 15×15×12, 15×15×22, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28×15×28, 28×15×22,28×15×15, 35×35×28, 35×35×22, 35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42,54×54×35, 54×54×28, 54×54×22, 54×54×15 SR5270 (Equal Coupling C×C) 8,10,12,15,22,28,35,42,54mm SR5240 (Reducing Coupling C×C) 10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15 SR5243 (Fitting Reducer Ftg×C) 10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15 SR5301 (Tube Cap) 8,10,12,15,22,28,35,42,54mm SR5085 (Cross Over Coupling C×C) 15,22mm SR5086 (Partial Cross Over Ftg×C) 15,22mm SR5062 (Straight Tap Connector C×FI) 15×1/2”, 15×3/4”, 22×3/4” SR5063 (Bent Tap Connector C×FI) 15×1/2”, 15×3/4”, 22×3/4

Factor:

Ningbo Hengsheng Pipe Fitting Co Ltd

Company Name

Ningbo Hengsheng Pipe Fitting Co Ltd

Address

No. 28 West Jinshui Road, Ninghai, Zhejiang

Country

China

Phone

0086-574-65338995

General Email

sales@hengshen.com

View All Listings by this Company

‘Endex’ range of brass and copper end feed fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2202701

Expiry date:

28/02/2027

Marking:

Endex (brand of Pegler Yorkshire Ltd.) and size on body

Installation Requirements:

R001

Model:

Endex range consisting of: N1 STRAIGHT COUPLING: 6mm to 54mm N1IM ADAPTOR COUPLING: 15mm x ½” to 28mm x 1” N1R REDUCING COUPLING: 8mm x 6mm to 54mm x 42mm N1SLIP STRAIGHT COUPLING SLIP: 15mm to 54mm N2 STRAIGHT FEMALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N3 STRAIGHT MALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N6 REDUCER: 8mm x 6mm to 54mm x 42mm N7 FEMALE ADAPTOR: 15mm x ½” to 54mm x 2” N8 MALE ADAPTOR: 15mm x ½” to 54mm x 2” N9 ADAPTOR: ½” x 15mm to ¾” x 22mm N11 UNION COUPLING CONE FACE: 15mm to 54mm N12 ELBOW: 8mm to 54mm N12R REDUCING ELBOW: 22mm x 15mm N12S STREET ELBOW: 10mm to 54mm N13 MALE ELBOW: 15mm x 1/2” to 28mm x 1” N14 FEMALE ELBOW: 15mm x ½” to 35mm x 1.1/4” N15 BACKPLATE ELBOW: 15mm x ½” to 22mm x ¾” N18 SLOW BEND: 10mm to 54mm N18S SLOW STREET BEND: 10mm to 54mm N21 OBTUSE ELBOW 45°: 12mm to 54mm N21S OBTUSE STREET ELBOW 45°: 15mm to 54mm N22 PARTIAL CROSSOVER: 15mm to 22mm N23 FULL CROSSOVER: 15mm to 22mm N24 EQUAL TEE: 6mm to 54mm N25 TEE REDUCED BRANCH: 15mm x 15mm x 10mm to 54mm x 54mm x 42mm N26 TEE ONE END REDUCED: 18mm x 15mm x 18mm to 54mm x 42mm x 54mm N27 TEE ONE END AND BRANCH REDUCED: 15mm x 12mm x 12mm to 54mm x 42mm x 42mm N28 TEE BOTH ENDS REDUCED: 10mm x 10mm x 12mm to 35mm x 35mm x 42mm N29 FEMALE TEE: 15mm x ½” x 15mm N29R FEMALE TEE: 22mm x ½” x 22mm to 28mm x ½” x 28mm N30 FEMALE TEE: 15mm x 15mm x ½” to 28mm x 28mm x 1” N30R FEMALE TEE: 22mm x 22mm x ½” to 35mm x 35mm x ½” N50 CROSS: 15mm to 22mm N61: 8mm to 54mm N61AV STOP END: 15mm N62 STRAIGHT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N63 BENT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N64 BENT UNION ADAPTOR: 15mm x ¾” N65 BENT MALE UNION CONNECTOR: 15mm x ½” to 28mm x 1” N68 STRAIGHT UNION ADAPTOR: 15mm x ¾” to 28mm x 1¼” N68FF FLAT FACED UNION ADAPTOR: 22mm x ¾” N68 METER UNION: 22mm x ¾” N69 STRAIGHT MALE UNION CONNECTOR: 15mm x ½” to 54mm x 2”

Factor:

Pegler Yorkshire Group Ltd

Company Name

Pegler Yorkshire Group Ltd

Address

Haigh Park Road Stourton Leeds

Postcode

LS10 1RT

Phone

+44 (0) 113 2701104

General Email

uk.sales@pegleryorkshire.co.uk

View All Listings by this Company

Center Brand range of brass and copper end feed fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2202702

Expiry date:

28/02/2027

Marking:

CB (brand of Wolseley) and size on body

Installation Requirements:

R001

Model:

Center Brand range consisting of: N1 STRAIGHT COUPLING: 6mm to 54mm N1IM ADAPTOR COUPLING: 15mm x ½” to 28mm x 1” N1R REDUCING COUPLING: 8mm x 6mm to 54mm x 42mm N1SLIP STRAIGHT COUPLING SLIP: 15mm to 54mm N2 STRAIGHT FEMALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N3 STRAIGHT MALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N6 REDUCER: 8mm x 6mm to 54mm x 42mm N7 FEMALE ADAPTOR: 15mm x ½” to 54mm x 2” N8 MALE ADAPTOR: 15mm x ½” to 54mm x 2” N9 ADAPTOR: ½” x 15mm to ¾” x 22mm N11 UNION COUPLING CONE FACE: 15mm to 54mm N12 ELBOW: 8mm to 54mm N12R REDUCING ELBOW: 22mm x 15mm N12S STREET ELBOW: 10mm to 54mm N13 MALE ELBOW: 15mm x 1/2” to 28mm x 1” N14 FEMALE ELBOW: 15mm x ½” to 35mm x 1.1/4” N15 BACKPLATE ELBOW: 15mm x ½” to 22mm x ¾” N18 SLOW BEND: 10mm to 54mm N18S SLOW STREET BEND: 10mm to 54mm N21 OBTUSE ELBOW 45°: 12mm to 54mm N21S OBTUSE STREET ELBOW 45°: 15mm to 54mm N22 PARTIAL CROSSOVER: 15mm to 22mm N23 FULL CROSSOVER: 15mm to 22mm N24 EQUAL TEE: 6mm to 54mm N25 TEE REDUCED BRANCH: 15mm x 15mm x 10mm to 54mm x 54mm x 42mm N26 TEE ONE END REDUCED: 18mm x 15mm x 18mm to 54mm x 42mm x 54mm N27 TEE ONE END AND BRANCH REDUCED: 15mm x 12mm x 12mm to 54mm x 42mm x 42mm N28 TEE BOTH ENDS REDUCED: 10mm x 10mm x 12mm to 35mm x 35mm x 42mm N29 FEMALE TEE: 15mm x ½” x 15mm N29R FEMALE TEE: 22mm x ½” x 22mm to 28mm x ½” x 28mm N30 FEMALE TEE: 15mm x 15mm x ½” to 28mm x 28mm x 1” N30R FEMALE TEE: 22mm x 22mm x ½” to 35mm x 35mm x ½” N50 CROSS: 15mm to 22mm N61: 8mm to 54mm N61AV STOP END: 15mm N62 STRAIGHT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N63 BENT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N64 BENT UNION ADAPTOR: 15mm x ¾” N65 BENT MALE UNION CONNECTOR: 15mm x ½” to 28mm x 1” N68 STRAIGHT UNION ADAPTOR: 15mm x ¾” to 28mm x 1¼” N68FF FLAT FACED UNION ADAPTOR: 22mm x ¾” N68 METER UNION: 22mm x ¾” N69 STRAIGHT MALE UNION CONNECTOR: 15mm x ½” to 54mm x 2”

Factor:

Wolseley UK

Company Name

Wolseley UK

Address

K2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Phone

01926 705792

View All Listings by this Company

Range of end feed brass fittings for use with copper tube (manufactured to EN 1057). The HLE20CB-d tank connector incorporates an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211802

Expiry date:

30/11/2027

Size:

End feed: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Model:

HLE11EB-a Female 90 Degree Elbow: 15mm-54mm x ¼”-2” BSP (F). HLE11EB-b Male 90 Degree Elbow: 15mm-54mm x ¼”-2” BSP (M). HLE11EB-c Wallplate: 15mm-22mm x ½”-¾” BSP (F). HLE20CB-a Male Coupler: 15mm-54mm x ⅜”-2” BSP (M). HLE20CB-b Female Coupler: 15mm-54mm x ⅜”-2” BSP (F). HLE20CB-c S/R W/Plate Straight: 15mm-22mm x ¼”-¾” BSP (F). HLE20CB-d Tank connector: 15mm-28mm x ½”-1” BSP (M). HLE30TB-a Female Tee: 15mm-28mm x 15mm-28mm x ¼”-1¼” BSP (F). 15mm-28mm x ¼”-1” BSP (F) x 15mm-28mm.

Factor:

Zhejiang Hailiang Co Ltd

Company Name

Zhejiang Hailiang Co Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. The HLDPMFWT and HLDPMFZT models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208804

Expiry date:

31/08/2027

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Model:

HLE11ECC-a Elbow 90 degree C X C: 8mm-108mm. HLE11ECC-b Street Elbow 90 degree Ftg X C: 8mm-108mm. HLE11ECC-c Street Elbow 45 degree Ftg X C: 8mm-108mm. HLE11ECC-d Street Elbow 45 degree Long Turn Ftg X C: 8mm-108mm. HLE11ECC-e Elbow 45 degree C X C: 8mm-108mm. HLE11ECC-f Elbow 45 degree Long Turn C X C: 8mm-108mm. HLE11ECC-g Street Elbow 90 degree Long Turn Ftg X C: 8mm-108mm. HLE11ECC-h Elbow 90 degree Long Turn C X C: 8mm-108mm. HLBGQW Partial Crossover Ftg x C: 12mm-28mm. HLE20CC-a Straight Coupling with dot C X C: 8mm-108mm. HLE20CC-b Slip Straight Coupling C X C: 8mm-108mm. HLE20CC-c Straight Coupling with groove C X C: 8mm-108mm. HLE21RCC-a Fitting Reducer Ftg X C: 8mm-108mm. HLE21RCC-b Reducing Coupler C X C: 8mm-108mm and ½” - 1”. HLE30TCC-a Equal TEE CxCxC: 8mm-108mm. HLE30TCC-b DWV Equal TEE CxCxC: 12mm-54mm. HLE31TRC Reducing Tee CxCxC: 8mm-108mm. HLE40CAP Cap: 8mm-108mm. HLGQW Full Crossover C x C: 12mm-28mm. HLNSZJ Female Adapter C X C: 15mm x ½” NPT (F) - 54mm x 2” NPT (F). HLUXW Return Bend Stop: 15mm-54mm. HLWSZJ Male Adapter C X C: 15mm x ½” NPT (M) - 54mm x 2” NPT (M). HLYJWT Reducing Elbow 90 degree C X C: 15mm-54mm. HLZDWT BENT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLZDZT STRAIGHT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLDPMFWT Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. HLDPMFZT Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Factor:

Zhejiang Hailiang Co Ltd

Company Name

Zhejiang Hailiang Co Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company