Water Regulations Approval Scheme Ltd

Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Code 1106 : Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

Back To Directory Sections

WRAS Approval Number: #1904345

‘System KAN-therm Press LBP’ consisting of brass or (black) plastic press fittings for use with ‘KAN-therm’ PERT/AL/PERT pipe. The press fitting is achieved by use of a press fitting tool. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
Section Subtitle:: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
WRAS Approval Number:: 1904345
Expiry date:: 30/04/2024
Size:: 16mm, 20mm, 25mm, 26mm, 32mm, 40mm, 50mm, 63mm
Marking:: Body of fitting: company logo (‘KAN’) and size. Straight couplers are marked with the letters KAN not a logo. Stainless steel sleeve: KAN and size. Pipe: KAN-therm, production date (DD/MM/YY) & technical information.
Installation Requirements:: R001
Model:: System KAN-therm Press LBP
Factor:: KAN Sp. z o.o.

Company Name
KAN Sp. z o.o.
Address
Zdrojowa str. 51, 16-001 Kleosin
Country
Poland
Phone
00488574-99-200
General Email
dkomarzewski@kan-therm.com

View All Listings by this Company

WRAS Approval Number: #1907301

‘Prineto’ sliding sleeve system consisting of brass fittings for use with ‘Prineto Stabil Multilayer Pipe' (white coloured PE-X inner layer, aluminium middle layer & white coloured PE-X outer layer). The connection is achieved by a sleeve over the pipe and fitting with the use of a sliding tool. Maximum working pressure 10.0 Bar. Maximum working temperature 90°C.

Section:: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
Section Subtitle:: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
WRAS Approval Number:: 1907301
Expiry date:: 31/07/2024
Size:: 16mm, 20mm, 25mm, 32mm.
Marking:: Fittings: IVT , dimensions , indication of material and supplier and certification marks (DVGW, KK) and batch numbers on body. Sleeve: IVT, Size, certification mark (DVGW), Supplier indicator and batch numbers on body. Pipes: PRINETO Stabil, dimensions and certification marks on pipe.
Installation Requirements:: R001
Model:: PRINETO Wall angle: Wall angle: 20-Rp 3/4 - (article no. 878 650 090), Wall angle: 25-Rp 3/4 - (article no. 878 650 100), PRINETO Ceiling Angle: Ceiling angle: 25-Rp 3/4 - (article no. 878 650 180), Ceiling angle: 32-Rp 3/4 - (article no. 878 650 240), PRINETO Angle 90°: Angle: 16 - (article no. 878 674 110), Angle: 20 - (article no. 878 674 220), Angle: 25 - (article no. 878 674 330), Angle: 32 - (article no. 878 674 440), PRINETO Angle 45°: Angle 45°: 16 - (article no. 878 675 110), Angle 45°: 20 - (article no. 878 675 220), Angle 45°: 25 - (article no. 878 675 330), Angle 45°: 32 - (article no. 878 675 440), PRINETO Angle transition with external thread: Angle transition: 16-R 3/4 - (article no. 878 674 160), Angle transition: 20-R 3/4 - (article no. 878 674 260), Angle transition: 25-R 3/4 - (article no. 878 674 360), Angle transition: 32-R 3/4 - (article no. 878 674 460), PRINETO Angle transition with internal thread: Angle transition: 16-Rp 3/4 - (article no. 878 672 160), Angle transition: 20-Rp 3/4 - (article no. 878 672 260), Angle transition: 25-Rp 3/4 - (article no. 878 672 360), Angle transition: 25-Rp 1 - (article no. 878 672 370), Angle transition: 32-Rp 3/4 - (article no. 878 672 460), Angle transition: 32-Rp 1 - (article no. 878 672 470), PRINETO Tee with inner threaded outlet: Tee: 20-Rp 3/4-20 - (article no. 878 662 262), Tee: 25-Rp 3/4-25 - (article no. 878 662 363), Tee: 32-Rp 3/4-32 - (article no. 878 662 464), PRINETO Tee: Tee: 16 - (article no. 878 660 111), Tee: 16-20-16 - (article no. 878 660 121), Tee: 16-25-16 - (article no. 878 660 131), Tee: 20-14-20 - (article no. 878 660 202), Tee: 20-16-16 - (article no. 878 660 211), Tee: 20-16-20 - (article no. 878 660 212), Tee: 20-20-16 - (article no. 878 660 221), Tee: 20 - (article no. 878 660 222), Tee: 20-25-20 - (article no. 878 660 232), Tee: 25-16-16 - (article no. 878 660 311), Tee: 25-16-20 - (article no. 878 660 312), Tee: 25-16-25 - (article no. 878 660 313), Tee: 25-20-16 - (article no. 878 660 321), Tee: 25-20-20 - (article no. 878 660 322), Tee: 25-20-25 - (article no. 878 660 323), Tee: 25-25-16 - (article no. 878 660 331), Tee: 25-25-20 - (article no. 878 660 332), Tee: 25 - (article no. 878 660 333), Tee: 25-32-25 - (article no. 878 660 343), Tee: 32-16-32 - (article no. 878 660 414), Tee: 32-20-25 - (article no. 878 660 423), Tee: 32-20-32 - (article no. 878 660 424), Tee: 32-25-20 - (article no. 878 660 432), Tee: 32-25-25 - (article no. 878 660 433), Tee: 32-25-32 - (article no. 878 660 434), Tee: 32 - (article no. 878 660 444), PRINETO Coupler: Coupler: 16 - (article no. 878 640 110), Coupler: 20 - (article no. 878 640 220), Coupler: 25 - (article no. 878 640 330), Coupler: 32 - (article no. 878 640 440), PRINETO Reducing coupler: Reducing coupler: 20-16 - (article no. 878 640 210), Reducing coupler: 25-16 - (article no. 878 640 310), Reducing coupler: 25-20 - (article no. 878 640 320), Reducing coupler: 32-25 - (article no. 878 640 430), PRINETO Transition with external thread: Transition: 16-R 3/4 - (article no. 878 641 160), Transition: 20-R 3/4 - (article no. 878 641 260), Transition: 25-R 3/4 - (article no. 878 641 360), Transition: 32-R 3/4 - (article no. 878 641 460), PRINETO Transition with internal thread: Transition: 16-Rp 3/4 - (article no. 878 642 160), Transition: 20-Rp 3/4 - (article no. 878 642 260), Transition: 25-Rp 3/4 - (article no. 878 642 360), Transition: 32-Rp 3/4 - (article no. 878 642 460), PRINETO Transition for radial pressing: Press-type: 16-P 15 - (article no. 878 643 190), Press-type: 20-P 18 - (article no. 878 643 290), Press-type: 20-P 22 - (article no. 878 643 294), Press-type: 25-P 22 - (article no. 878 643 390), Press-type: 32-P 28 - (article no. 878 643 490), PRINETO Blind plug: Blind plug: 16 - (article no. 878 343 150), Blind plug: 20 - (article no. 878 343 160), Blind plug: 25 - (article no. 878 643 170), Blind plug: 32 - (article no. 878 643 180), PRINETO Stabil multilayer pipe: Stabil pipe 16 bundle: 16 - (article no. 878 520 100), Stabil pipe 16, 4 m rod: 16 - (article no. 878 620 100), Stabil pipe 20 bundle: 20 - (article no. 878 520 200), Stabil pipe 20, 4 m rod: 20 - (article no. 878 620 200), Stabil pipe 25 bundle: 25 - (article no. 878 520 300), Stabil pipe 25, 4 m rod: 25 - (article no. 878 620 300), Stabil pipe 32, 4 m rod: 32 - (article no. 878 620 400).
Factor:: IVT Installations – und Verbindungstechnik GmbH & Co. KG

Company Name
IVT Installations – und Verbindungstechnik GmbH & Co. KG
Address
Gewerbering Nord 5 91189 Rohr Germany
Phone
+49/9876/9786-0
General Email
info@ivt-rohr.de

View All Listings by this Company

WRAS Approval Number: #1907357

‘EL’ range of compression fittings and ‘EJ’ range of press fittings (brass bodies) for use with ‘EA’ range of PEX/AL/PEX multiplayer pipe. Maximum working pressure & temperature: 10.0 Bar @ 95°C.

Section:: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
Section Subtitle:: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
WRAS Approval Number:: 1907357
Expiry date:: 31/07/2024
Size:: ‘EL’ and ‘EJ ranges: 16mm, 20mm, 25mm, 32mm Size added to 'EL' range October 2019: 26mm
Marking:: Efield, DN & PN on fitting. Efield & technical information on pipe.
Installation Requirements:: R001
Model:: ‘EL’ and ‘EJ ranges’ of fittings for use with ‘EA16, EA20, EA25 & EA32’ multi-layered pipes.
Manufacturer:: Shandong Efield Piping System Co.,Ltd.

Company Name
Shandong Efield Piping System Co.,Ltd.
Address
Yikang Road 2369, Tengzhou city, Shandong Province
Country
China
Phone
+86-632-5990659

View All Listings by this Company

WRAS Approval Number: #1907377

‘Safety` range of compression fittings with (PPSU bodies) and from June 2022 (PPS bodies) for use ‘Multicalor’ multi-layered PEX/Al/PEX pipe. For above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
Section Subtitle:: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
WRAS Approval Number:: 1907377
Expiry date:: 31/07/2024
Size:: 16mm - 75mm. ⅜” - 2½” BSP (M). ½” - 2” BSP (F).
Marking:: Fittings: Aquatechnik logo on body. Pipes: Aquatechnik name and logo, ‘Multicalor’, pipe standard, class, pressure rating, year of manufacture, pipe material and other techncial information on pipe.
Installation Requirements:: R001
Model:: Threaded joint M. (PPSU thread, and from June 2022 PPS thread): 20001: M⅜”x16, 20002: M½”x16, 20006: M½”x20, 20010: M¾”x20, 20012: M¾”x26, 20013: M1”x26, 20016: M1”x32, 20018: M1¼”x40, 20028: M1½”x50, 20033: M2”x63, 20039: M2½”x75. Threaded joint M. (Alloy thread): 20022: M½”x16, 20026: M½”x20. Threaded joint F. (PPSU thread, and from June 2022 PPS thread): 20062: F½”x16, 20066: F½”x20, 20070: F¾”x20, 20072: F¾”x26, 20073: F1”x26, 20076: F1”x32, 20078: F1¼”x40, 20088: F1½”x50, 20093: F2”x63. Threaded joint F. (Alloy thread): 20082: F½”x16, 20086: F½”x20. Reducer: 20122: 20x16, 20126: 26x16, 20130: 26x20, 20132: 32x16, 20136: 32x20, 20138: 32x26, 20142: 40x16, 20144: 40x20, 20146: 40x26, 20148: 40x32, 20156: 50x40, 20166: 63x32, 20168: 63x40, 20170: 63x50, 20178: 75x32, 20180: 75x40, 20182: 75x50, 20184: 75x63. Threaded elbow F. with bracket (PPSU thread, and from June 2022 PPS thread): 20212: F½”x16, 20216: F½”x20. Threaded elbow F. with bracket (Alloy thread): 20202: F½”x16, 20206: F½”x20. Threaded elbow F. (PPSU thread, and from June 2022 PPS thread): 20222: F½”x16, 20226: F½”x20, 20230: F¾”x20, 20232: F¾”x26, 20238: F1”x32. Threaded elbow F. (Alloy thread): 20262: F½”x16, 20266: F½”x20. Threaded elbow M. (PPSU thread, and from June 2022 PPS thread): 20282: M½”x16, 20286: M½”x20, 20288: M¾”x20, 20290: M¾”x26, 20296: M1”x32. Threaded elbow M. (Alloy thread): 20322: M½”x16, 20326: M½”x20. Elbow with extended thread M/F: 20330: M¾”xF½”x16. Threaded elbow F/F (PPSU thread, and from June 2022 PPS thread): 20332: F½”x16, 20336: F½”x20, 20337: F¾”x26, 20338: F1”x32. Threaded elbow M/F (PPSU thread, and from June 2022 PPS thread): 20342: M½”x16, 20344: M½”x20, 20346: M¾”x26, 20348: M1”x32. Elbow 90° M/F: 20352: 16x16, 20356: 20x20, 20358: 26x26, 20360: 32x32, 20362: 40x40. Elbow 90°: 20382: 16x16, 20386: 20x20, 20388: 26x26, 20390: 32x32, 20392: 40x40, 20394: 50x50, 20396: 63x63, 20398: 75x75. Elbow 90° F/F: 20402: 16x16, 20406: 20x20, 20408: 26x26, 20410: 32x32. Elbow 45°: 20416: 20x20, 20418: 26x26, 20420: 32x32, 20422: 40x40, 20424: 50x50, 20426: 63x63, 20428: 75x75. Elbow 45° M/F: 20432: 20x20, 20433: 26x26, 20434: 32x32, 20435: 40x40, 20436: 50x50. Pipe coupling: 20442: 16x16, 20446: 20x20, 20448: 26x26, 20450: 32x32, 20452: 40x40, 20454: 50x50, 20456: 63x63, 20458: 75x75. Reduced pipe coupling: 20472: 20x16, 20440: 26x20. Nipples F/F, 20522: 16x16, 20526: 20x20, 20528: 26x26, 20530: 32x32, 20532: 40x40, 20534: 50x50. Threaded Tee F. (PPSU thread, and from June 2022 PPS thread): 20542: 16xF½”x16, 20546: 20xF½”x20, 20550: 26xF¾”x26, 20556: 32xF1”x32. Threaded Tee F. (Alloy thread): 20582: 16xF½”x16, 20586: 20xF½”x20. Eccentric threaded Tee F. (PPSU thread, and from June 2022 PPS thread): 20592: 16xF½”x16, 20596: 20xF½”x20. Eccentric threaded Tee F. (Alloy thread): 20606: 20xF½”x20. Threaded Tee F. angle 90° (Alloy thread): 20632: 16xF½”x16. Tee: 20662: 16x16x16, 20666: 20x20x20, 20668: 26x26x26, 20670: 32x32x32, 20672: 40x40x40, 20674: 50x50x50, 20676: 63x63x63, 20678: 75x75x75. Reduced Tee: 20717: 20x16x16, 20720: 20x16x20, 20725: 26x16x26, 20728: 26x20x26, 20732: 32x16x32, 20735: 32x20x32, 20736: 32x26x32, 20740: 40x16x40, 20742: 40x20x40, 20744: 40x26x40, 20746: 40x32x40, 20750: 50x16x50, 20754: 50x20x50, 20756: 50x26x52, 20758: 50x32x50, 20760: 50x40x50, 20762: 63x16x63, 20766: 63x20x63, 20768: 63x26x63, 20770: 63x32x63, 20772: 63x40x63, 20774: 63x50x63, 20788: 75x63x75. Pipe union with PPSU fitting thread and alloy tang thread: 20832: F¾”x16, 20836: F¾”x20, 20840: F1”x26, 20844: F1¼”x32. Bent pipe union with PPSU fitting thread and alloy tang thread: 20862: F¾”x16, 20866: F¾”x20, 20870: F1”x26, 20874: F1¼”x32. Pipe union: 20882: 16x16, 20886: 20x20, 20888: 26x26, 20890: 32x32. Closing cap M.: 20902: 16, 20906: 20, 20908: 26, 20910: 32, 20912: 40, 20914: 50, 20916: 63, 20918: 75. Closing cap F.: 20952: 16, 20956: 20, 20958: 26, 20960: 32, 20962: 40, 20964: 50, 20966: 63, 20968: 75. Reducing cap: 21064: F½”x26, 21066: F½”x32. ‘Multicalor’ multi-layered PEX/Al/PEX pipe: 16-75mm. 74154: 16, 74156: 20, 74158: 26, 74160: 32, 74162: 40, 74164: 50, 74166: 63, 74168: 75.
Factor:: Aquatechnik Group S.p.a.

Company Name
Aquatechnik Group S.p.a.
Address
20020 Magnago (MI) - Via P. F. Calvi, 40 - Italy
Phone
+39 (0)331 307015

View All Listings by this Company
Manufacturer:: Aquatechnik Group S.p.a. (fittings) and Valsir S.p.a. (pipe).

Company Name
Aquatechnik Group S.p.a. (fittings) and Valsir S.p.a. (pipe).
Address
Aquatechnik: 20020 Magnago (MI) - Via P.F. Calvi, 40 - Italy Valsir: 25078 Vestone (BS) - Località Merlano, 2 - Italy

View All Listings by this Company

WRAS Approval Number: #1907402

SP range of press fittings (brass bodies) for use with SP range of PEX/AL/PEX multiplayer pipe. Maximum working pressure & temperature: 10.0 Bar @ 95°C.

Section:: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
Section Subtitle:: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
WRAS Approval Number:: 1907402
Expiry date:: 31/07/2024
Size:: 16mm, 20mm, 25mm, 26mm & 32mm
Marking:: South Coast Sales Company logo, size on body South Coast Sales Company logo, South Press & technical information on pipe.
Installation Requirements:: R001
Model:: SP RANGE OF FITTINGS FOR USE WITH SP MULTI-LAYERED PIPES: 16-32MM
Factor:: South Coast Sales

Company Name
South Coast Sales
Address
1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.
Postcode
T12 TR62
Country
Ireland
Phone
00353 21 - 43 46 143
General Email
info@southcoastsales.com

View All Listings by this Company