Fire Protection

Section Code 1070 : Products used within fire protection systems. Products listed in this section are for non-wholesome water use only.

Back To Directory Sections

WRAS Approval Number: 1708711

SD 200` pressure augmenting fire sprinkler device incorporating an end suction fire pump, multi stage jockey pump, a single check valve (suitable for backflow protection against Fluid Category 2) , non-return valve (not suitable for backflow protection) and a single lever operated spherical valve. Maximum working pressure 11.0 bar. Cold water use only.

  • Section: 1070 Fire Protection
  • Section Subtitle: Products used within fire protection systems. Products listed in this section are for non-wholesome water use only.
  • WRAS Approval Number: 1708711
  • Expiry date: 31/08/2022
  • Note: Please note that although the product incorporates a single check valve, an additional single check valve is required at the inlet (IRN R150) to guard against materials of construction.
  • Size: DN100 flanged inlet & 114.3mm coupling outlet.
  • Marking: Model & Triple P Projects on data plate.
  • Installation Requirements R001 R150 R415
  • Model
    ‘SD200 Pressure augmenting fire sprinkler device’.
  • Factor: Triple P projects Ltd.
    Company Name
    Triple P projects Ltd.
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1904057

Automated fire sprinkler system, consisting of an in-line water filter, a solenoid valve (activated by Smartscan (IR Sensor) once alarm confirms a fire), a pump assembly, various connecting hoses, a quick connect fitting (with test port) and a spray head outlet. The product is also supplied with a non-verifiable single check valve assembly (suitable for backflow prevention up to Fluid Category 2), intended for installation at the inlet. Maximum working pressure: 10.0 Bar. Cold water use only.

  • Section: 1070 Fire Protection
  • Section Subtitle: Products used within fire protection systems. Products listed in this section are for non-wholesome water use only.
  • WRAS Approval Number: 1904057
  • Expiry date: 30/04/2024
  • Note: No hose is supplied for connection between the control unit and spray head outlet. The single check valve supplied with this product must be installed to maintain the validity of the WRAS approval. This product has been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed.
  • Size: ¾” BSP (F)
  • Marking: Automist on control unit. Plumis on adhesive label on control unit.
  • Installation Requirements R001 R040 R415
  • Model
    Automist SmartScan Hydra System.
  • Manufacturer: Plumis Ltd
    Company Name
    Plumis Ltd
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1907331

Range of pump systems for use in fixed installation fire sprinkler systems. Having black polymer coated cast iron bodies, pressure gauge and pressure switch and electronic controller installed within a cabinet. Maximum working pressure 10.0 bar. Cold water use only.

  • Section: 1070 Fire Protection
  • Section Subtitle: Products used within fire protection systems. Products listed in this section are for non-wholesome water use only.
  • WRAS Approval Number: 1907331
  • Expiry date: 31/07/2024
  • Note: IRN R150 is required on the supply to this fitting because it is for a non-wholesome water application and the materials of construction have not been fully assessed against the requirements of the Regulations. Additional backflow protection may be required depending on the type of sprinkler system or arrangement this unit is employed within.
  • Size: See model.
  • Marking: Grundfos logo on front of casing. Grundfos logo, serial no, part no, date of manufacture YYWW and technical information on adhesive label on pump.
  • Installation Requirements R001 R150 R415
  • Model
    98916439 – 1” suction x 1” discharge 98916440 – 1” suction x 1” discharge 98916461 – 1¼” suction x 1” discharge 98916462 – 1¼” suction x 1” discharge 99282914 – 1¼” suction x 1” discharge 98916463 – 1½” suction x 1½” discharge 98916464 – 1½” suction x 1½” discharge All connections are BSP (F)
  • Manufacturer: Grundfos Manufacturing Ltd.
    Company Name
    Grundfos Manufacturing Ltd.
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of