Range of water filter heads and housings (sumps). The HIS/IN4 models have a chrome plated stainless steel filter head and housing, all other models have a plastic filter head and housing. Ecofast/IN3/QT models incorporate an integral quick turn shut off valve within the filter head to allow the filter housing to be removed. All models are for use with John Guest LLDPE pipe. Maximum working pressure 6.0 bar. Cold water use only.

Section:

1050 Filters and Housings

WRAS Approval Number:

2204075

Expiry date:

30/04/2027

Note:

R008 does not apply to the HIS/IN4 models.

Size:

⅜" push fit inlet and outlet.

Marking:

Filter heads and housings: Ecofast/IN3/QT: Doulton on filter head. All other models: Doulton on adhesive label on filter sump. Cartridges: Doulton or British Berkefeld (brand of Doulton Water Filters) (see model section) and filter model on top of filter/treatment cartridge.

Installation Requirements:

R001 R008 R120 R150 R170

Proviso:

* The product(s) listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.

Model:

Ecofast/IN3/QT. HIP DUO/IN2. HIP/IN1. HIS/IN4. The models can be supplied with any of the filter cartridges as listed below. Except the HIP DUO/IN2 housing which always includes the Ultracarb Filter Candle in one housing and the limescale reduction/ ONINFL cartridge in the other. British Berkefeld brands: Standard Filter Candle*, Sterasyl Filter Candle*, Super Sterasyl Filter Candle*, Ultra Sterasyl Filter Candle*, ATC Supersterasyl*. Doulton brands: Standard Filter Candle*, GOFgravity1*, Super Sterasyl Filter Candle*, Ultra Sterasyl Filter Candle*, GOFgravity2*, Ultra Fluoride Filter Candle*, GOFgravity3*, Ultracarb Filter Candle*, Biotect Ultra Filter Candle*, Ultracarb SI Filter Candle*, Biotect Ultra SI Filter Candle*, ONINFE*, Fluoride Reduction Water Treatment Cartridge, ONINFF, Nitrate Reduction Water Treatment Cartridge, ONINFN, Limescale Reduction Water Treatment Cartridge, ONINFL, Chlorine Reduction Water Treatment Cartridge, ONINFC, Sediment Reduction Water Treatment Cartridge, ONINFS.

Manufacturer:

Doulton Water Filters

Company Name

Doulton Water Filters

Address

Lymedale Cross, Lower Milehouse Lane, Newcastle-under-Lyme, Staffordshire

Postcode

ST5 9BT

Country

United Kingdom

Phone

01782 664420

View All Listings by this Company

A range of blue epoxy coated steel reverse rinsing fine filters with a stainless-steel sieve and an EDPM O-ring. Supplied with two pressure gauges and metal ball valve on the drain. Maximum working pressure 16 bar. Maximum operating temperature 40°C.

Section:

1050 Filters and Housings

WRAS Approval Number:

2204023

Expiry date:

30/04/2027

Size:

DN65, DN80 or DN100 Flanged (Replaces XX in the model code).

Marking:

Resideo, Braukmann, Model name, PN, DN and other technical information on adhesive label on body.

Installation Requirements:

R001 R110 R150 R170 R511

Model:

F78TS-XXFY Y denotes the mesh size of the filter and can be replaced with any of the following: A = 100μm, B = 20μm, C = 50μm, D = 200μm.

Factor:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

Manufacturer:

Ademco 1 GmbH

Company Name

Ademco 1 GmbH

Address

Hardhofweg 40, 7481 Mosbach

Country

Germany

View All Listings by this Company

Range of medical sterilised water filter cartridges with plastic bodies and EPDM ‘O’-Rings. Models MTFW-SLSS / MTFD-SLSS incorporate a check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum Working Temperature: 50°C.

Section:

1050 Filters and Housings

WRAS Approval Number:

2205057

Expiry date:

31/05/2027

Note:

Open Outlet Use Only. Claims made by the manufacturer have not been tested and are not considered part of the approval listing.

Marking:

Pentair, model code and technical information on adhesive label located on body.

Installation Requirements:

R001 R120 R150 R170

Model:

MSF-SLSS: Medical Shower Filter Sterilised Starter Set (Connection 1/2" BSP/NPT M) MSF-SLRC: Medical Shower Filter Sterilised Replacement Cartridge (Connection Quick Release) MTFW-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT) MTFD-SLRC: Medical Tap Filter Drinking Sterilised Replacement Cartridge (Connection Quick Release) MTFD-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT) MTFD-SLRC: Medical Tap Filter Drinking Sterilised Replacement Cartridge (13.68mm Connection Quick Release)

Factor:

Fileder Filter Systems Ltd.

Company Name

Fileder Filter Systems Ltd.

Address

20/20 BUSINESS PARK, MAIDSTONE, KENT ME16 0LS

View All Listings by this Company

Range of tap outlets with plastic bodies incorporating a filter within the body, incorporating a hollow fibre filter membrane. The inlet of the filter incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The filters are supplied with (and must be used with) a chrome plated brass adapter which incorporates a pastic flow regulator. Maximum operating temperature 60°C.

Section:

1050 Filters and Housings

WRAS Approval Number:

2206333

Expiry date:

30/06/2027

Note:

Open outlet use only.

Size:

90-001861: M22 (M) 90-001862: M22 (F)

Marking:

T-Safe (brand of Johs. Tandrup A/S) on body.

Installation Requirements:

R001 R040

Model:

02-831401 Medical Tap Filter Fixed Position 31 Day. 02-831402 Medical Tap Filter Fixed Position 31 Day, Sterile. 02-831403 Medical Tap Filter Fixed Position 62 Day. 02-831404 Medical Tap Filter Fixed Position 62 Day, Sterile. 02-831405 Medical Tap Filter Fixed Position 92 Day. 02-831406 Medical Tap Filter Fixed Position 92 Day, Sterile. Filters are to be installed with 90-001861 Fixed Position Tap Adapter, Gasket seal & 90-001862 Fixed Position Tap Adapter, O-ring seal.

Manufacturer:

Johs. Tandrup A/S

Company Name

Johs. Tandrup A/S

Address

Gydevang 1, DK - 3450 Allerod, Denmark

View All Listings by this Company