Combination Tap Assemblies

Section Code 0465 : Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

#2001027

Range of floor mounted single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet with a dome type operating member. The product incorporates an approved check valve cartridge on the outlet to the shower hose and on the inlet of the shower handset, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0465 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001027
Expiry date:
31/01/2025
Size:
½” BSP (F)
Marking:
Dornbracht on body
Installation Requirements:
R001 R010 R040
Model:
25863809, 25863661.
Manufacturer:
Aloys F. Dornbracht GmbH & Co. KG
Company Name
Aloys F. Dornbracht GmbH & Co. KG
Address
Kobbingser Muhle 6 D-58640 Iserlohn
Country
Germany

View All Listings by this Company

Print This Approval

#2003006

Floor mounted single hole, single outlet (fixed) combination tap assembly incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The shower outlet incorporates a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Product is supplied with a shower hose and handset Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0465 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2003006
Expiry date:
31/03/2025
Note:
Rough kit, part number 3594597090 is not part of this approval.
Size:
38mm OD to fit into rough kit, part number 3594597090
Marking:
Dornbracht on front of body.
Installation Requirements:
R001 R010 R040
Model:
25863710
Manufacturer:
Aloys F. Dornbracht GmbH & Co. KG
Company Name
Aloys F. Dornbracht GmbH & Co. KG
Address
Kobbingser Muhle 6 D-58640 Iserlohn
Country
Germany

View All Listings by this Company

Print This Approval

#2003008

Single hole, single outlet (fixed) combination tap assembly (various finished brass, see model), incorporating a ceramic cartridge headworks with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a rubber aerator. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0465 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2003008
Expiry date:
31/03/2025
Note:
This product is not supplied with a shower hose and handset
Size:
Stainless steel braided PEX lined hose assemblies incorporating ⅜” BSP captive nut end connections.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R006 R009 R030
Model:
31 930 XXX Where xxx denotes finish and can be replaced with: -000 Chrome -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Kreuzwegstrasse 41 D-77656 Offenburg
Country
Germany

View All Listings by this Company

Print This Approval

#2003043

Range of floor mounted single hole, single outlet (fixed) combination tap assemblies with various finishes. The models incorporate ceramic cartridge headworks, single lever operating members and a self-cancelling lockable diverter to shower outlet. The spout outlet incorporates a plastic aerator. Products are supplied with a shower hose and shower handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

Section:
0465 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2003043
Expiry date:
31/03/2025
Size:
Stainless steel PET braided EPDM lined hose assemblies with ¾” captive nuts.
Marking:
LOTA on rear of body
Installation Requirements:
R001 R030
Model:
62287-5701, 62287-586801, 62287-574408.
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022
Country
China

View All Listings by this Company

Print This Approval

#2003072

Range of floor mounted single hole, single outlet (fixed) combination tap assemblies with various finishes. The models incorporate ceramic cartridge headworks, single lever operating members and a self-cancelling lockable diverter to shower outlet. The spout outlet incorporates a plastic aerator. Products are supplied with a shower hose and shower handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

Section:
0465 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2003072
Expiry date:
31/03/2025
Size:
Stainless steel PET braided EPDM lined hose assemblies with ¾” captive nuts.
Marking:
Bathroom Brands logo on rear of body
Installation Requirements:
R001 R030
Model:
HOX.009CP, HOX.009MB & HOX.009BB COMBINATION TAP ASSEMBLIES
Factor:
Bathroom Brands Group Limited.
Company Name
Bathroom Brands Group Limited.
Postcode
DA1 5FU
Country
United Kingdom
Phone
07775 491 559

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 2 of 6

© WRAS 2024 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.