Combination Tap Assemblies
Section Code 0450 : Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
Back To Directory Sections
WRAS Approval Number: #1909009
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass).
The T6502 model incorporates quarter turn ceramic disc headwork with single lever operating members.
Model T6302 incorporates non-rising spindle headworks with dome type operating members.
The spout outlets incorporate a plastic flow straightener.
Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909009
- Expiry date:
- 30/09/2024
- Size:
- Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
- Marking:
- Zhejiang Xindong Sanitary Ware Co. Ltd. logo on body.
- Installation Requirements:
- R001 R006 R010
- Model:
-
T6302 & T6502
- Manufacturer:
- Zhejiang Xindong Sanitary Ware Co.,Ltd.
Company Name
Zhejiang Xindong Sanitary Ware Co.,Ltd.
Address
Xuanmen Industrial Zone
Yuhuan,
Zhejiang
Country
China
View All Listings by this Company
WRAS Approval Number: #1909013
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straighter. The product is supplied with an optional plastic aerator and a click type waste.
Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909013
- Expiry date:
- 30/09/2024
- Size:
- Stainless steel braided polyethylene lined flexible hose assemblies with ⅜” captive nut end connections and ⅜” BSP (M) x 15mm compression adaptors.
- Marking:
- Ideal Standard logo on operating member.
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
BC329AA– DESNA SL Basin mixer GRANDE chrome with
CLICK waste
- Manufacturer:
- Ideal Standard – Vidima AD
Company Name
Ideal Standard – Vidima AD
Address
View All Listings by this Company
WRAS Approval Number: #1912701
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc and single lever operating members (351906 model) or non-rising spindle headworks (4M3904 & 4M1906 models) with either cross top (4M1906 model) or dome type (4M3904 model) operating members.
The spout outlet incorporates a plastic aerator or a flow straightener, supplied with both.
Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1912701
- Expiry date:
- 31/12/2024
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
- Marking:
- Mercia (brand of Comap) on front base of body.
- Installation Requirements:
- R001 R006 R010
- Model:
-
4M3904 MERCIA MODERN,
4M1906 MERCIA TRADITIONAL MONO,
351906 MERCIA QT.
- Manufacturer:
- Comap UK Limited
Company Name
Comap UK Limited
Address
Unit C6 William Way
Moss Ind Estate
St Helens Road
Postcode
WN7 3PT
Country
Leigh
View All Listings by this Company
WRAS Approval Number: #1909033
Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a single sequential headwork controlling both flow and temperature with a single lever operating member. The product is supplied with copper tails, two check valve cartridge housings each containing an approved check valve cartridge verified by test (suitable for backflow protection against Fluid Category 2) and two inline screwdriver operated isolation valves for installation on each inlet.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909033
- Expiry date:
- 30/09/2024
- Size:
- 15mm Compression (to isolation valve).
- Marking:
- Model number and date of manufacture (MM/YY) on back of body. Twyford on operating member
- Installation Requirements:
- R001 R006
- Model:
-
SF1139CP
- Factor:
- Twyford Bathrooms Geberit Service
Company Name
Twyford Bathrooms Geberit Service
Address
Geberit House,
Edgehill Drive,
Warwick
Postcode
CV34 6NH
View All Listings by this Company
WRAS Approval Number: #1909037
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener (130438 & 900108 models) or a plastic aerator (131738 model). The products are supplied with a click type waste.
Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909037
- Expiry date:
- 30/09/2024
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies with EPDM washers and ½” captive nut end connections.
- Marking:
- PPI on rear of body.
- Installation Requirements:
- R001 R006 R010
- Model:
-
131738.
130438.
900108.
130438 BGP added December 2022
- Factor:
- PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road
Xinyang Industrial Zone
Haicang District
Xiamen 361022
Country
China
View All Listings by this Company
WRAS Approval Number: #1909051
Range of single hole, single outlet fixed combination tap assemblies (various finishes) incorporating quarter turn ceramic disc headworks with dome type operating members.
The temperature is controlled via a thermostatic mixing cartridge with dome type operating member. The spout outlet incorporates an adjustable rubber spray insert.
The inlet hoses each incorporate a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection
Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909051
- Expiry date:
- 30/09/2024
- Note:
- No testing performed on pop-up waste.
- Size:
- Stainless steel braided PE-X lined flexible hose assemblies with ⅜” captive nut end connections.
- Marking:
- AXOR on body.
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
12 010 xxx Axor Starck Organic 2-handle basin mixer 80 with pop-up waste set
12 011 xxx Axor Starck Organic 2-handle basin mixer 80 without pull-rod
12 012 xxx Axor Starck Organic 2-handle basin mixer 170 without pull-rod for wash bowls
12 013 xxx Axor Starck Organic 2-handle basin mixer 240 without pull-rod for wash bowls
12 014 xxx Axor Starck Organic 2-handle basin mixer 50 with pop-up waste set for hand wash basins
available in -000 (Chrome) and customized finishes:
-020 PVD polished chrome
-260 PVD brushed chrome
-830 PVD polished nickel
-820 PVD brushed nickel
-990 PVD polished gold optic
-250 PVD brushed gold optic
-300 PVD polished red gold
-310 PVD brushed red gold
-130 PVD polished bronze
-140 PVD brushed bronze
-330 PVD polished black chrome
-340 PVD brushed black chrome
-930 PVD polished brass
-950 PVD brushed brass
-800 PVD stainless steel optic
- Manufacturer:
- Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9,
77761 Schiltach
Country
Germany
View All Listings by this Company
WRAS Approval Number: #1909080
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass or matte black), incorporating a ceramic cartridge headwork with single lever operating members.
The spout outlets incorporate a plastic aerator. The AMBCPUK model is supplied with a click type waste.
Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909080
- Expiry date:
- 30/09/2024
- Size:
- Model NO CBM01 = M10 threaded.
All other models: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
- Marking:
- Methven on operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
NO CBM01.
AMBCPUK.
AMBCPUK/B.
AMTBCPUK.
AMBMCPUK.
Models added November 2019:
AMBBK
ALBCP
ALBBK
AMBMBK
AMTBBK
- Manufacturer:
- Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court,
Yew Tree Way,
Golborne,
Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
View All Listings by this Company
WRAS Approval Number: #1906129
Range of single hole, single outlet combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member.
The spout outlet of models 424816, 449529 & 424853 incorporate a plastic aerator.
Models 424875 & 424851 incorporate a plastic flow regulator on the inlets.
Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1906129
- Expiry date:
- 30/06/2024
- Size:
- Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
- Marking:
- IFLO ON REAR OF TAP BODY
- Installation Requirements:
- R001 R006 R009 R010
- Model:
-
424875 IFLO TAY BASIN MIXER, 424851 IFLO TAY MINI BASIN MIXER, 449530 IFLO TAY TALL BASIN MIXER, 424853 IFLO BELAYA BASIN MIXER, 424816 IFLO BELAYA MINI BASIN MIXER & 449529 IFLO BELAYA TALL BASIN MIXER
- Factor:
- City Plumbing Supplies/ Plumbing Trade Supplies
Company Name
City Plumbing Supplies/ Plumbing Trade Supplies
Address
PTS HOUSE
ELDON WAY
CRICK
Postcode
NN6 7SL
Country
NORTHAMPTON
View All Listings by this Company
WRAS Approval Number: #1909392
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork with single lever top operating members.
The spout outlet incorporates a plastic flow straightener.
Maximum working pressure 10 bar. Maximum operating temperature 60°C
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1909392
- Expiry date:
- 30/09/2024
- Size:
- Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
- Marking:
- AKW on operating member
- Installation Requirements:
- R001 R006 R010
- Model:
-
08-008-041 MONOBLOC & 12-011-080 AKW
- Factor:
- DLP Limited
Company Name
DLP Limited
Address
Unit L, Snugborough,
Bradden,
Isle of Man
Postcode
IM4 4LH
Country
United Kingdom
View All Listings by this Company
WRAS Approval Number: #1912704
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc and single lever operating members (C48122 model) or non-rising spindle headworks (C48108 & C48106 models) with either cross top (C48106 model) or dome type (C48108 model) operating members.
The spout outlet incorporates a plastic aerator or a flow straightener, supplied with both.
Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
- Section:
- 0450 Combination Tap Assemblies
- Section Subtitle:
- Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 1912704
- Expiry date:
- 31/12/2024
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
- Marking:
- SWAN BRAND OF WOLSELEY ON INDICE
- Installation Requirements:
- R001 R006 R010
- Model:
-
C48108 SWAN STANDARD DC BASIN
C48122 SWAN 1/4 TURN LEVER MONO BASIN
C48106 SWAN STANDARD DC BASIN
- Factor:
- Wolseley
Company Name
Wolseley
Address
Kingmaker Court
Warwick Technology Park
Warwick
Postcode
CV34 6DY
View All Listings by this Company
Back To Directory Sections Page 7 of 58