‘R Series, R Series Mini, R Series Dispenser, R Series Dual, R Series Universal & R Series Modular’ ranges of normally closed, normally open or latching solenoid valves with off-white nylon bodies, incorporating either NBR or silicone diaphragms with POM diaphragm inserts (only). The inlet or outlet can incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet can also incorporate a plastic flow restrictor. The inlet can also incorporate a plastic strainer or a plastic flow regulator. (This option is not available on the push fit (quick coupling) sizes added September 2020). ‘R Series’ models are available as either in-line or at a 90° angle (hose tail outlet models only), except for ‘R series modular’ models added July 2019 which are only available at a 90° angle. From January 2020 models are available with the RF flow meter. From November 2020 models are available with the RV filters, which are stainless steel filters with nylon bodies to be mounted on every Serie R model body in place of the solenoid. Models with a push fit (quick coupling) connection added September 2020 are for use with LLDPE pipe (all sizes), or PEX pipe (manufactured to BS7291-3) (10mm & 15mm sizes only). Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C, except for models fitted with a flow meter or Series R filter which are cold water use only.

• Section: 2240 Valves
• Section Subtitle: Solenoid, plastic.
• WRAS Approval Number: 1903093
• Expiry date: 31/03/2024
• Note: The LLDPE and PEX pipe referred to within the description are not provided or considered covered under the scope of this approval. Each must be sourced separately by the installer. Claims for flow rate are made by the manufacturer and not considered part of the listing.
• Size: R series and R series Mini: Inlet sizes available in: ½” or ¾” BSP (M or F), ¼” BSP (M), ⅛” BSP (F). Outlet sizes available in: ⅜”, ½” & ¾” BSP (M or F), ¼” BSP (M), ⅛” BSP (F), 10mm & 13mm hose tail, 10mm spigot. Models added June 2019 - R Series Dispenser & Dual: M10, double or triple inlet ¼” BSP (M), single outlet ¾” BSP (M), 10mm hose tail, 6mm/10mm spigot inlet/outlet. Model added July 2019 - R Series Universal & Modular: R Series Universal models: 18mm inlet/outlet bayonet connections. R Series Modular models: ¾” BSP (M) inlet x 10mm hose tail outlet. Sizes added September 2020 (all models): Push fit (Quick coupling) ¼”, ⅜”, 6mm, 8mm, 10mm or 15mm.
• Marking: R series, R series Mini, R Series Dispenser, R Series Dual family and Universal models: R.P.E., flow arrow & operating info on body. R Series Modular models: R.P.E. logo, flow arrow on body. Serie R and operating info on coil. From January 2020 models that include a flow meter (RF): Products may also be marked with date of manufacture (dial type) on the flow meter. From November 2020 models that include a R Series Filter: Products may also be marked with RPE on filter cap.
• Installation Requirements R001 R008
• Model
  R Series: Single (1 inlet, 1 outlet), Double (1 inlet, 2 outlets), Triple (1 inlet, 3 outlets), Quadruple (1 inlet, 4 outlets) & Mini (1 inlet, 1 outlet). Models added June 2019: R Series Dispenser family (2 or 3 inlets, 1 outlet). R series Dual family (1 or 2 inlet(s), 1 outlet). Model added July 2019: R Series Universal: Universal body A (straight controlled water flow, 1 outlet). Universal body B (2 outlets, a straight free flow and left controlled flow). Universal body C (2 outlets, a straight free flow and a right controlled flow). Universal body D (Straight free flow, no control). R Series Modular: RM1100 (1 inlet, 1 angled outlet), RM1200 (1 inlet, 2 angled outlets), RM1300 (1 inlet, 3 angled outlets). Models added January 2020: ‘Flow meter (RF)’ option: Flow rate 0.1-3.6 l/min Flow rate 0.5-7 l/min Flow rate 1-15 l/min Flow rate 5-30 l/min Which can be included on any of the R Series models on this approval. Please note that the flow meter replaces a solenoid, as a result R Series models that only include one solenoid become standalone flow meters. Flow meter models are denoted by a RF suffix to the R series model name, e.g. R Series Single ½” x ½” RF. Models added November 2020: ‘Filter (RV)’ option: R Serie Filter 131 μ (114 mesh). R Serie Filter 168 μ (86 mesh). R Serie Filter 237 μ (64 mesh). R Serie Filter 307 μ (49 mesh). Which can be included on any of the R Series models on this approval. Please note that the filter replaces a solenoid, as a result R Series models that only include one solenoid become standalone filters.
• Manufacturer: R.P.E. Srl.
  Company Name

  R.P.E. Srl.

  Address

  Via S. Abrogio, 1,3,5 22070 Carbonate (CO) Italy

  Phone

  +39 0331.832515
  View All Listings by this Company