Section Code 5260 : Components.
Back To Directory Sections'BGF PP-R Pipe'. Green coloured, extruded PP-R pipe. For use with water up to 85°C.
'VASEN PPR Pipe'. Green coloured (with red coloured external stripe), extruded PPR pipe. For use with water up to 85°C.
'VASEN PPR Fitting'. Green coloured, injection moulded PPR fitting. For use with water up to 85°C.
'BGF PP-R Fittings'. Green coloured, injection moulded PP-R fittings. For use with water up to 85°C.
'Aquaterra Faser Composite Stabil Pipe PP-R (SDR 6 & SDR 7.4)'. Extruded, multi-layered PP-R pipes comprising of a green coloured inner layer, red coloured middle layer and green coloured outer layer. For use with water up to 85°C.
‘BOR Plus Faser Composite Stabil Pipe PP-R (SDR 6 & SDR 7.4)’. Extruded, multi-layered PP-R pipes comprising of a beige coloured inner layer, green coloured middle layer and beige coloured outer layer. For use with water up to 85°C.
'Hepworth Qatar PPR 125 Pipe'. Green coloured (opaque), extruded PPR pipe. For use with water up to 85°C.
'Vialli PPR Fitting'. Green coloured (opaque), injection moulded PPR fitting. For use with water up to 85°C.
'NOVATHERM Pipe'. Green coloured (with external red stripes), extruded PPR pipe. For use with water up to 60°C.
'NOVATHERM Fittings'. Green coloured, injection moulded PPR fittings. For use with water up to 60°C.
'Yuhwa rp 2400 Green PPR Fitting'. Green coloured (opaque), extruded PPR fitting. For use with water up to 85°C.
'Yuhwa rp 2400 Green PPR Pipe'. Green coloured (opaque), extruded PPR pipe. For use with water up to 85°C.
'DACTAtherm PP-R 80 Fittings'. Green coloured, injection moulded polypropylene fittings. For use with water up to 85°C.
'Akansu Boru Green Pipe'. Green coloured, extruded PP pipe. For use with water up to 85°C.
'Greentherm Pipe'. Green coloured, extruded polypropylene pipe. For use with water up to 85°C.
'Greentherm Fitting'. Green coloured, injection moulded polypropylene fitting. For use with water up to 85°C.
'SAB A16 Compression Fittings'. Black coloured, compression fitting bodies, injection moulded from polypropylene (PP-B). For use with water up to 60°C.
`Maxxam PP Flow Meter Insert`. Off-white coloured, injection moulded polypropylene flow meter insert. For use with water up to 23°C. From September 2023, the component is for use with water up to 85°C.
'Fusio-Technik faser Fiber-T'. Extruded, multi-layered pipe comprising of a white coloured PP-RCT inner layer, grey coloured PP-R+GF middle layer and green coloured PP-R outer layer. For use with water up to 85°C.
'ECONTEC'. Green coloured, extruded PP-RCT pipe. For use with water up to 85°C.
'Supreme S16 Compression Fittings'. Black coloured, compression fitting bodies, injection moulded from polypropylene (PP-B). For use with water up to 60°C.
'Banninger PP-RCT Fittings'. Green coloured, injection moulded PP-RCT fittings. For use with water up to 85°C.
'Moplen EP 300 K PP Cover'. White coloured, translucent, injection moulded polypropylene cover. For use with water up to 85°C.
'GLOBAL PP01'. Blue coloured, injection moulded PP fittings. For use with water up to 23°C.
'Magnum 3G Compression Fitting Body'. Black coloured, injection moulded polypropylene fitting body. For use with water up to 60°C.
'Q-Therm'. Multi-layered, extruded pipe comprising of a green coloured PP-R inner layer, dark green coloured glass filled PP-R middle layer and green coloured PP-R outer layer. For use with water up to 85°C.
'DACTAtherm PP-R 80 Green Pipe'. Green coloured, extruded polypropylene pipe. For use with water up to 85°C.
'Popular PPRC 100 Pipe'. Green coloured, extruded PPR pipe. For use with water up to 60°C.
'Supreme Compression Fittings'. Black coloured, injection moulded polypropylene compression fittings. For use with water up to 23°C.
'ALTECH PP-H FC 3013/500.01 GB13 NC0001-00 (1004864600000)'. Natural (appears white coloured), injection moulded PP-H material. For use with water up to 50°C.
`Aqua-Plus Fiberglass triple layered PP Pipe`. Extruded, triple layered pipe consisting of a green coloured, polypropylene inner layer, grey coloured glass fibre middle layer and green coloured, polypropylene outer layer. For use with water up to 70°C.
`Aqua-Plus Pipe`. Green coloured, extruded polypropylene pipe. For use with water up to 70°C.
‘Amiantit Oman PP-R Pipe’. Green coloured, extruded PP-R pipe. For use with water up to 85°C.
`Aqua-Plus Fittings`. Green coloured, injection moulded polypropylene fittings. For use with water up to 70°C.
'HTP-5056 Hexagonal Tube Settler'. Pale blue coloured, extruded polypropylene 'tube settler' component. For use with water up to 23°C.
'3P-PIPE Green PPR Pipe'. Green coloured, extruded PPR pipe. For use with water up to 65°C.
'Palaplast Thermopal PP-R Pipe'. Green coloured (with dark green stripe), extruded polypropylene pipe. For use with water up to 70°C.
'Palaplast Thermopal PP-R Fitting'. Green coloured, injection moulded polypropylene fitting. For use with water up to 70°C.
'DACTAtherm PP-R Fibreglass Pipe'. Extruded, triple layered pipe comprising of a green coloured polypropylene inner layer, a translucent fibreglass middle layer and a green coloured polypropylene outer layer. For use with water up to 85°C.
'DSA Pipe'. Grey coloured extruded PPR pipe. For use with water up to 70°C.
'DSB Fitting'. Grey coloured, injection moulded PPR fittings. For use with water up to 70°C.
'XSPPR-EAC01'. Grey coloured, extruded polypropylene pipe. For use with water up to 85°C.
'ROMAKLIMA Pipe'. Extruded, triple layered pipe comprising of a green coloured PP-R inner layer, green coloured PP-R (with glass fibre) middle layer and green coloured PP-R outer layer (with dark green stripes). For use with water up to 85°C.
'Helisystem CT fitting'. Green coloured, injection moulded PP-RCT fitting. Between July 2021 and September 2022, the fitting was for use with water up to 23°C. Between October 2022 and July 2026, the fitting is for use with water up to 75°C.
'Romafaser CT pipe'. Extruded, triple layered pipe comprising of a green coloured PP-RCT inner layer, green coloured PP-RCT (with glass fibre) middle layer and green coloured PP-RCT outer layer. For use with water up to 85°C.
`PPR 001` Pipes. White (with red external stripe) or tangerine coloured, extruded polypropylene pipes. For use with water up to 85°C.
'Q-Therm'. Extruded, multi-layered PP-R CT pipe comprising of a green coloured PPR inner layer, translucent PPR/glass fibre middle layer and green coloured PPR outer later. For use with water up to 85°C.
'+GF+ Aquasystem PP-RCT'. Extruded, green coloured (with yellow external stripe), multi-layered pipe. All three layers of the pipe are green coloured and made from PP-RCT but the middle layer also has glass fibres. For use with water up to 85°C.
'ALMATHERM PPR Pipe'. Green coloured, extruded polypropylene pipe. For use with water up to 85°C.
'T-Mech PP-R Multilayer Pipe'. Extruded, multi-layered pipe comprising of a green coloured PP-R inner layer, black coloured PP-R/glass fibre middle later and green coloured PP-R outer layer. For use with water up to 85°C.
'SHK Aqua Fitting'. Green coloured, injection moulded PP-R fitting. For use with water up to 85°C.
'+GF+ Aquasystem PPR Pipe'. Extruded PPR pipes which are either green coloured (with blue stripes) or grey coloured (with red stripe). For use with water up to 70°C.
'+GF+ Aquasystem PPR Fittings'. Injection moulded PPR fittings which are either green coloured or grey coloured. For use with water up to 70°C.
'iJoint'. Black coloured, injection moulded polypropylene fitting. For use with water up to 60°C.
'Vesbo Fittings'. Green coloured, injection moulded PPR fittings. For use with water up to 60°C.
'Vesbo Pipe'. Green coloured (with external red stripes), extruded PPR pipe. For use with water up to 60°C.
'VIALLI PPR Pipes'. Green coloured, extruded PPR pipe. For use with water up to 85°C.
'SHK Aqua PP-R pipe'. Extruded, multi-layered PP-R pipe comprising of a white coloured inner, black coloured middle layer and green coloured outer layer. For use with water up to 85°C.
'Manjeera PP01 Fitting Blue'. Blue coloured, injection moulded PP fitting. For use with water up to 23°C.
'Polygon PPR Pipe'. Green coloured (with red stripe), single layered, extruded PPR pipe. For use with water up to 85°C.
'Polygon PPR Fitting'. Green coloured, injection moulded PPR fitting. For use with water up to 85°C.
'LSPPR-GY001'. Grey coloured (with red or blue external stripe), extruded polypropylene pipe. For use with water up to 85°C.
'Tulip Saddle Fittings'. Blue coloured, injection moulded polypropylene saddle. For use with water up to 23°C.
'GREAN PIPE PPR Pipe'. Green coloured, extruded PPR pipe. For use with water up to 85°C.
'GREAN PIPE PPR Fitting'. Green coloured, injection moulded PPR fitting. For use with water up to 85°C.
'PRESTO compression fittings'. Black coloured, injection moulded, polypropylene compression fittings. For use with water up to 23°C.
'LSPPR-GY001'. Grey coloured, injection moulded polypropylene fitting. For use with water up to 85°C.
'PPHS40'. Pale grey coloured, injection moulded PP material. For use with water up to 23°C.
'RH-PPR-32 Fitting'. Green coloured, injection moulded PPR fittings. For use with water up to 85°C.
'RH-PPR-32 Pipe'. Green coloured, extruded PPR pipe. For use with water up to 85°C.
'BC 245 MO Polypropylene Cover'. White coloured, injection moulded, circular polypropylene cover component. For use with water up to 85°C.
'Plastherm PPR Pipe'. Green coloured, opaque, extruded PPR pipe. For use with water up to 85°C.
Range of white coloured (opaque), PP filter media, which comprise of melt blown fibres laid onto an extruded core. ‘SupaGard’ range (complete range except B-Blue) with a micron rating of between 0.5μm & 200 μm. ‘SupaSpun’ (complete range) with a micron rating of between 0.3μm & 180μm. ‘Contour’ (complete range of lengths). For use with water up to 23°C.
'K-227'. Green coloured (with black external stripe), extruded PP-R pipe. For use with water up to 23°C.
‘Smart Home Pipes’. Extruded, single layered PPR, Multi-layered PPR (Fibre Glass) and Multi-layered PPR (Aluminium) pipes. The single layered pipe is green coloured. Multi-layered PPR (Fibre Glass) pipe: green coloured, PP-R inner layer, black coloured, glass-fibre reinforced PP-RC second layer, green coloured PP-R third layer and black coloured, PP-R outer layer. Multi-layered PPR (Aluminium) pipe: green coloured, PP-R inner layer, green coloured, glass-fibre reinforced PP-RC second layer, aluminium third layer and black coloured, PP-R outer layer. All are for use with water up to 65°C.
'Smart Home Fittings'. Black or green coloured, injection moulded PPR fittings. For use with water up to 65°C.
‘FILTER NOZZLES P, PTL, P5, P6, P7, T, TTL, TD, R, RTL, RD, B, V, VL, C, D4, D3 & D9. NUTS N & HR. EXPANDING BOLT TS. VALVE BODIES DPI & DPS. SLEEVES G, GM & GE. COLLECTORS CSI05, CSI06, CST06, CSD06, CSI08, CST08, CSG08, CSD08 & CSI08. FILTER ARMS SF/SFC, SD, SB & SC. FILTER NOZZLES RB2 & RB3. DISTRIBUTORS RBD2 & RBD3’. Blue, black, dark grey, light grey, green, red, yellow & light blue coloured, injection moulded polypropylene components. For use with water up to 23°C.
'MIDAD PPR'. Green coloured, extruded polypropylene pipe. For use with water up to 85°C.
'Helisystem'. Green coloured (with red stripe), extruded PPR pipe. For use with water up to 70°C.
'Romafaser'. Green coloured (with blue stripe), extruded PPR & glass fibre pipe. For use with water up to 70°C.
'Helisystem'. Green coloured, injection moulded PPR fittings. For use with water up to 75°C.
‘Techno PPR UV Multilayer Pipe’. Extruded multi-layered pipe comprising of a green coloured PPR inner layer, red coloured PPR/glass filler middle layer and black coloured PPR/UV stabiliser outer layer. For use with water up to 85°C.
‘Techno PPR Multilayer Pipe’. Extruded multi-layered pipe comprising of a green coloured PPR inner layer, red coloured PPR/glass filler middle layer and green coloured PPR outer layer. For use with water up to 85°C.
'Kimplas Trustlene Compression Fittings'. Black coloured, injection moulded polypropylene compression fittings. For use with water up to 23°C.
‘Compression Fitting IOCL’s MG3030’. Black coloured, injection moulded polypropylene compression fitting. For use with water up to 23°C.
'Elysee PN16 Compression Fittings'. Black coloured, injection moulded polypropylene fittings. For use with water up to 23°C.
'Elysee Saddle Fittings'. Black coloured, injection moulded polypropylene fittings. For use with water up to 23°C.
'Techno PPR Fitting'. Green coloured, injection moulded polypropylene fitting. For use with water up to 85°C.
'Techno PPR Pipes'. Green coloured, extruded polypropylene pipes. For use with water up to 85°C.
'Alfaidro & Water Pipe PPR Green Fittings'. Green coloured, injection moulded PPR fittings. For use with water up to 85°C.
'PAYAL Service Saddle'. Blue coloured, injection moulded saddle fittings. For use with water up to 23°C.
'Aquatherm Green' range of extruded, polypropylene pipes, for use with water up to 85°C. (1) Aquatherm Green Pipe. Single layered, green coloured polypropylene pipe. The SDR11S pipe has four, blue longitudinal stripes on the exterior of the pipe. (2) Aquatherm Green Pipe (formerly named Fusiotherm Fibre Composite Pipe). Triple layered pipe consisting of a light green coloured polypropylene inner layer, glass fibre reinforced, polypropylene middle layer and light green coloured polypropylene outer layer. The pipe has dark green stripes on the exterior of the pipe.
'Prince Greenfit Triple Layer Pipe' & 'Prince Greenfit Mono Layer Pipe'. The mono layered pipe consists of a green coloured, extruded polypropylene single layer. The triple layered PPR pipe consists of an extruded, white coloured inner layer, a beige coloured middle layer & a green coloured outer layer. For use with water up to 85°C.
'Prince Greenfit White Triple Layer Pipe' & 'Prince Greenfit Blue Triple Layer Pipe' Triple layered, extruded PPR pipes comprising of a white coloured inner layer, beige coloured middle layer and then either a white coloured or blue coloured outer layer. For use with water up to 85°C.
'COD.2011'. Black coloured, injection moulded polypropylene compression fitting. For use with water up to 23°C.
'RP2400'. White coloured, extruded polypropylene pipe. For use with water up to 85°C.
'Topline Compression Fittings and Topline Integrated Service Saddle Fittings'. Injection moulded polypropylene fittings available in white, black and blue colours. For use with water up to 23°C.
'Romaklima CT Pipe'. Green coloured (with white stripe), extruded, multi-layered pipe comprising of a a PP-RCT inner & outer layer and glass fibre middle layer. For use with water up to 70°C.
'Euroaqua Pipe & Airguard Pipe'. Green coloured, extruded PPR pipe. For use with water up to 85°C.
'RAMTECH Compression Fitting'. Off-white coloured, injection moulded polypropylene compression fittings. For use with water up to 23°C.
'JP Water Zone PP Saddle Fittings'. Blue coloured, injection moulded polypropylene saddle fittings. For use with water up to 65°C.
'Supreme Saddle Fittings'. Black coloured, injection moulded PP saddle fittings. For use with water up to 23°C.
'Prince Greenfit Fitting'. Green coloured, injection moulded polypropylene fitting. For use with water up to 85°C.
'Safelok Body'. Black coloured, injection moulded, polypropylene compression fitting body. For use with water up to 23°C.
'KAN-therm PP Glass'. Extruded, multi-layered pipe comprising of a green coloured PP-R inner layer, off-white coloured PP-R middle layer and green coloured PP-R outer layer (with red external stripe). For use with water up to 85°C.
'System KAN-therm'. Green coloured (opaque), injection moulded PP-R fitting. For use with water up to 85°C.
'Topilene® R200P (colourless) & Topilene® R200P-3702 (grey coloured)'. Extruded polypropylene pipes. For use with water up to 85°C.
'Supreme Indo Green PP-R Pipe'. Green coloured (with red external stripe), extruded polypropylene pipe. For use with water up to 85°C.
'Dubai Therm PP-R pipe'. Green coloured, extruded PP-R pipe. For use with water up to 85°C.
'Wefatherm Fitting'. Green coloured, injection moulded PP-R fitting. For use with water up to 60°C.
'Wefatherm Pipe'. Green coloured (with or without blue external stripe), extruded PP-R pipe. 'Wefatherm Fibre Pipe'. Extruded, multi-layered pipe comprising of a green coloured PP-R inner layer, green coloured PP-R/fibre middle layer and green coloured (with red stripe) PP-R outer layer. Both pipes are for use with water up to 60°C.
'PPNBH 1002 nut, body and holder'. Black coloured, injection moulded, polypropylene nut, body and holder component. For use with water up to 23°C.
'MANARCO PP-R Pipe'. Green coloured, extruded PP-R pipe. For use with water up to 23°C.
'Aquatherm Fitting'. Green coloured, injection moulded polypropylene fittings. For use with water up to 60°C.
'Uniflow Integrated Saddle'. Black coloured, injection moulded polypropylene saddle fitting. For use with water up to 23°C.
'Q-Therm'. Green coloured, extruded PP-R 80 pipes. For use with water up to 85°C.
'TORO 25 PPR Pipe'. Green coloured (with red stripes), extruded polypropylene pipe. For use with water up to 85°C.
‘TORO 25 PPR Fittings’. Green coloured, injection moulded polypropylene socket fitting. For use with water up to 85°C.
'Parflex'. Black coloured, extruded polypropylene tube. For use with water up to 23°C.
'Almona PP-R Pipe'. Green coloured, extruded polypropylene pipe. For use with water up to 85°C.
'PP-R Instaplast'. Grey coloured, extruded polypropylene pipe, available with or without a red coloured, external stripe. For use with water up to 60°C.
'NEPROPLAST Multi-layered and Single layered pipes'. The single layered pipe is green coloured, extruded PP-R. The multi-layered pipes are extruded and have a green coloured PP-R inner layer and black coloured PE100 outer layer (with or without a red stripe). For use with water up to 70°C.
'NEPROPLAST Fittings'. Green coloured, injection moulded PP fittings. For use with water up to 70°C.
'Aqua Plus PPR-CT Pipe'. Green coloured, extruded, single layered PP pipe. For use with water up to 23°C.
'Aqua Plus Fibreglass Triple Layer PPR-CT Pipe'. Triple layered, extruded pipe consisting of a green coloured PP inner layer, grey coloured PP/fibreglass middle layer and green coloured PP outer layer. For use with water up to 23°C.
'Yuhong PP-R Pipe GS'. Green coloured (with two, red lines) PP-R pipe manufactured by single screw extrusion. For use with water up to 70°C.
'ERA PPR PIPE'. Green coloured (with red stripes), extruded polypropylene pipe. For use with water up to 85°C.
'ERA PPR FITTING'. Green coloured, injection moulded polypropylene fittings. For use with water up to 85°C.
'Kimplas PP Mechanical Saddle'. Blue coloured, injection moulded PP mechanical saddle fitting. For use with water up to 23°C.
'Green Pipes PPR Pipe'. Green coloured, extruded PPR pipe. For use with water up to 85°C.
‘Green Pipes PPR Fitting’. Green coloured, injection moulded PPR socket fittings. For use with water up to 85°C.
'ATLAS & FLOWTECH - PP-RGF PIPE'. Extruded, multi-layered pipe comprising of a green coloured PP-R inner layer, red coloured glass fibre middle layer and green coloured (with red stripe) PP-R outer layer. For use with water up to 85°C.
'AFS PP Saddle Fitting'. Blue coloured, injection moulded polypropylene fittings. For use with water up to 23°C.
‘T-MECH’. Green coloured, extruded PP-R Pipe. For use with water up to 85°C.
'Powertherm PP-R pipe'. Green coloured, extruded PP-R pipe (manufactured from SABIC Vestolen P 9421). For use with water up to 85°C.
'POWERtherm PP-R Fittings'. Green coloured, injection moulded PP-R fittings (manufactured from SABIC Vestolen P 9421). For use with water up to 85°C.
'Irriplast PP Fitting'. Black coloured, injection moulded PP fitting. For use with water up to 85°C.
'K.P.T. Pipe'. Green coloured (with blue stripe), extruded pipe. For use with water up to 70°C.
'RAKplus'. Green coloured, extruded PP-R pipes. For use with water up to 85°C.
'Wavin PPRC Fitting'. Grey/green coloured, injection moulded PPRC fitting. For use with water up to 85°C.
'Wavin PPRC Solid Wall Pipe'. Grey/green coloured (with external red stripe), extruded PP-RC pipe. For use with water up to 85°C.
'Flowtech & Atlas PP-R Pipe'. Green coloured, extruded PP-R pipes. For use with water up to 85°C.
'Spectrum Polypropylene Support Core'. White coloured, injection moulded polypropylene support core component. For use with water up to 23°C.
'KTP Thermopipes'. Green coloured, extruded PPR pipe. For use with water up to 70°C.
'Polytech PPR Pipes'. Green coloured, extruded PPR pipes. For use with water up to 85°C.
'122102251 PP Mechanical Fitting'. Black coloured, injection moulded, polypropylene compression fitting body. For use with water up to 23°C.
'Vissen PP-R Pipe'. Green coloured (red, external stripe), extruded PP-R pipe. For use with water up to 85°C.
'AQUA PLUS PPR-CT Pipe'. Green coloured, extruded, single layered polypropylene pipe. For use with water up to 85°C.
'AQUA PLUS PPR-CT GF'. Extruded, triple layered polypropylene pipe consisting of a green coloured polypropylene inner layer, natural (appears grey in colour) glass fibre middle layer and green coloured polypropylene outer layer. For use with water up to 85°C.
'Binh Minh Plastic's PP-R pipe’. Blue coloured (with green stripe), extruded PP-R pipe. For use with water up to 85°C.
'Wasserfluss Clamp Saddle'. Blue coloured, injection moulded polypropylene saddle fitting. For use with water up to 23°C.
'Cosmoplast PP-R Pipe'. Green coloured, extruded PP-R pipe. For use with water up to 85°C.
'Vissen'. Black coloured, injection moulded polypropylene compression fitting. For use with water up to 23°C.
'Spectrum Carbon Block End Caps'. White coloured, extruded polypropylene end caps. For use with water up to 23°C.
'BORplus Faser Composite Stabil PP-RCT Pipe'. Extruded, multi-layered PP-RCT pipe comprising of a grey coloured inner layer, black coloured middle layer and grey coloured outer layer. For use with water up to 85°C.
'5308400500 polypropylene liner tube', taupe coloured, injection moulded polypropylene liner. In March 2025, '5308400500 polypropylene liner tube', natural (appears beige), injection moulded polypropylene liner was added to the approval. For use with water up to 23°C.
'Plas-fit PN 16 Compression Fittings Series 250/ 350'. Black coloured, injection moulded polypropylene fittings. For use with water up to 23°C.
‘Coprax® PP-R Pipe’. Blue coloured (with green stripe), extruded PP-R pipe. For use with water up to 85°C.
‘Coprax® PP-R Fitting’. Blue coloured, injection moulded PP-R fitting. For use with water up to 85°C.
'DESO PPR01'. Green coloured (with red external stripe), extruded polypropylene pipe. For use with water up to 85°C.
'Eurotherm PPR Fitting'. Green coloured, injection moulded PPR fitting. For use with water up to 85°C.
'Eurotherm PPR Pipe'. Green coloured (with yellow coloured stripe), extruded PPR pipe. For use with water up to 85°C.
'Unidelta Compression Fitting'. Black coloured, injection moulded polypropylene compression fittings. For use with water up to 60°C.
'ATLAS & FLOWTECH PP-RCT PIPE'. Green coloured, extruded PP-RCT pipe. For use with water up to 85°C.
'ATLAS & FLOWTECH PP-RCT Fitting'. Green coloured, injection moulded PP-RCT fittings. For use with water up to 85°C.
'Presto Integrated Clamp Saddle - Saddle' & 'Presto Integrated Clamp Saddle - Elbow'. Blue coloured, injection moulded polypropylene saddle component and black coloured, injection moulded polypropylene elbow component. For use with water up to 23°C.
'Magnum Monoblock Hotneck - Top Cap' and 'Magnum Monoblock Hotneck - Saddle'. Black coloured, injection moulded, polypropylene 'top-cap' and 'saddle' components. For use with water up to 23°C.
‘ECOTEC tubsed® TS.50/TS.85'. Black coloured, extruded polypropylene water channel component. Shore hardness 74. For use with water up to 23°C.
'40-5048'. White coloured (translucent), injection moulded, polypropylene 'Filter Frame' component. For use with water up to 45°C.
'Novatherm Faser Composite Pipe’. Extruded, multi-layered pipe comprising of a green coloured, PP-R inner and outer layer and green coloured, glass fibre reinforced PP-R middle layer. For use with water up to 65°C.
'ISOMAG Cylinder'. Grey coloured, extruded polypropylene cylinder component. For use with water up to 60°C.
'Cosmoplast PPR Glass Fibre Reinforced Pipe'. Extruded, triple layered pipe consisting of a green coloured, polypropylene inner layer, grey coloured, glass fibre middle layer and a green coloured, polypropylene outer layer. For use with water up to 85°C.
'VIALLI-De SDR 6 & SDR 7.4 PPR pipes'. Green coloured, extruded PPR pipes. For use with water up to 85°C.
'VIALLI-De PPR SDR 6 Pipe with Aluminum Middle Layer'. Extruded PPR pipe with a green coloured inner and outer layer and aluminium middle layer. For use with water up to 85°C.
'VIALLI-De PPR SDR 6 & SDR 7.4 Pipes with Glass Fibre Middle Layer'. Extruded PPR pipes with a green coloured inner and outer layer and a red coloured, glass fibre middle layer. For use with water up to 23°C.
'Roxy PP-R pipe'. Green coloured, extruded PP-R pipe. For use with water up to 70°C.
'UPMC PPR Pipe'. Green coloured (with yellow stripe), extruded PPR pipe. For use with water up to 85°C.
'Techno PP-RCT Pipe'. Green coloured (with yellow stripe), extruded PP-RCT pipe. For use with water up to 85°C.
'Techno PP-RCT Fitting'. Green coloured, injection moulded PP-RCT fitting. For use with water up to 23°C.
'Techno UV Black Fitting'. Black coloured, injection moulded PPR fitting. For use with water up to 85°C.
'Techno UV Black Pipe'. Black coloured (with yellow stripe), extruded PPR pipe. For use with water up to 85°C.
'Almona PP-RCT 5 layered pipe' & 'Almona PP-RCT 3 layered pipe'. Extruded, multi-layered PP-RCT pipes. Both pipes have a green inner layer, grey second layer and green third layer. The 5-layer pipes then have an additional grey fourth layer and black outer layer. For use with water up to 85°C.
'Apitherm PP-RCT Class 2 & Class 5 Pipes'. Green coloured (the Class 5 pipes have a red stripe), extruded PP-RCT pipes. For use with water up to 85°C.
'Apitherm PP-RCT Class 2 & Class 5 Fittings'. Green coloured, injection moulded PP-RCT fittings. For use with water up to 85°C.
'AquaTerra SDR 6 PP-R Pipes'. Green coloured, extruded PP-R pipes. 'AquaTerra SDR 7.4 PP-R Pipes', green coloured, extruded PP-R pipes were added to the approval in September 2024. All pipes are or use with water up to 85°C.
'AquaTerra PP-R Fitting'. Green coloured, injection moulded PP-R fitting. For use with water up to 85°C.
'+GF+ Hakan Aquasystem'. White or green coloured, injection moulded PPR fittings. For use with water up to 85°C.
'+GF+ Hakan Aquasystem Faser Composite Stabil Pipe'. Multi-layered, extruded PPR pipe consisting of a white coloured inner, green coloured middle and white coloured outer layer. The following multi-layered, extruded PPR pipes were added to the approval in April 2025: Green coloured inner, green coloured middle and green coloured outer layer. Beige coloured inner, green coloured middle and beige coloured outer layer. Grey coloured inner, green coloured middle and grey coloured outer layer. For use with water up to 85°C.
‘Formül, Aquapa, Aquaplast, Foraqua & Aquapipe Green PP-R Pipe'. Green coloured, extruded PP-R pipes. For use with water up to 85°C.
‘Formül, Aquapa, Aquaplast, Foraqua & Aquapipe Green PP-R Fittings'. Green coloured, injection moulded PP-R fittings. For use with water up to 85°C.
'KALSON PP Saddle Fittings'. Blue coloured, injection moulded polypropylene saddle fittings. For use with water up to 65°C.
'+GF+ Hakan Aquasystem'. Extruded, PPRC pipes available in green, white or beige colours. For use with water up to 85°C.
'ERA PP Compression Fitting'. Black coloured, injection moulded polypropylene compression fitting. For use with water up to 23°C.
'Fasotherm'. Green coloured, extruded PP-R pipe. For use with water up to 23°C.
'Ashirvad PP Compression fitting body'. Black coloured, injection moulded PP fitting body. For use with water up to 23°C.
'CPLAST PPR Pipes'. Green coloured, extruded PPR pipes. For use with water up to 85°C.
'Cosmoplast Polypropylene Fittings'. Green coloured, injection moulded polypropylene fittings. For use with water up to 85°C.
'DANCO AQUAFLO'. Green coloured (with red stripes), extruded polypropylene pipe. For use with water up to 85°C.
'Kaizen Fitting'. Black coloured, injection moulded, polypropylene compression fitting body. For use with water up to 23°C.
'S-Ion PPR Pipe'. Green coloured (with blue stripes), extruded PPR pipe. For use with water up to 85°C.
'GF PROGEF PP Pipe'. Beige coloured, extruded PP-H pipe. For use with water up to 80°C.
'GF PROGEF PP Fitting'. Beige coloured, injection moulded PP-H fitting. For use with water up to 23°C.
'Egetherm PP-R Pipes'. Extruded PP-R pipes available in green (with black stripe) and white (with black stripe) colours. For use with water up to 23°C.
'Dome screen d18.2 (natural, appears white coloured), CV Housing DW13 (pastel green) & CV Housing DW13 (light blue)'. Injection moulded polypropylene components. For use with water up to 85°C.
'bqtherm® Pipe'. Green coloured, extruded PP-R pipe. For use with water up to 85°C.
'bqtherm® Fittings'. Green coloured, injection moulded PP-R fittings. For use with water up to 85°C.
'Wefatherm PP-RCT Pipe'. Green coloured, extruded PP-RCT pipe. For use with water up to 85°C.
'Wefatherm PP-RCT Fitting'. Green coloured, injection moulded PP-RCT fitting. For use with water up to 85°C.
'Thermopipe'. Blue coloured (with green stripe), extruded PPR pipe. For use with water up to 85°C.
'ECOSAN ML5 Pipe'. Extruded, multi-layered PP-RCT/PP-R/PP-R pipe which has a grey coloured inner layer and green coloured outer layer. The three intermediate layers are grey in colour. ‘ECOSAN SDR6 Pipe’. Extruded, single layered, green coloured (with red external stripe) PP-R pipe. Both pipes are for use with water up to 85°C.
'ECOSAN Fittings'. Green coloured, injection moulded PP-R fittings. For use with water up to 70°C.
WATERTEC/CLIMATEC Pipes. Multi-layered PP-RCT/PP-RCT-GF/PP-RCT pipes comprising of a green coloured inner layer, black coloured middle layer and green coloured (with grey stripes) outer layer. For use with water up to 85°C.
'Wavin PP-RC Glass Fibre Lined Pipe'. Extruded pipe comprising of a grey coloured PP-RC inner layer, black coloured glass fibre middle layer and grey coloured PP-RC outer layer. For use with water up to 65°C.
'Poliext PP Compression Fittings PN16'. Black coloured, injection moulded, PP compression fittings. For use with water up to 23°C.
'FLOWTECH PP-RCT GF Pipe'. Multi-layered, extruded pipe comprising of green coloured PP inner layer, red coloured glass fibre middle layer and green coloured (with red stripe) PP outer layer. For use with water up to 85°C.
'ISOMAG Cylinder'. Grey coloured, extruded polypropylene cylinder component. For use with water up to 60°C.
'ATLAS PP-RCT GF Pipe'. Multi-layered, extruded pipe comprising of green coloured PP inner layer, red coloured glass fibre middle layer and green coloured (with red stripe) PP outer layer. For use with water up to 85°C.
'SP Sereneplast'. Green coloured (with external red stripes), extruded PPR pipe. For use with water up to 60°C.
'SP Sereneplast Fittings'. Green coloured, injection moulded PPR fittings. For use with water up to 60°C.
'KALDE PPR Pipes'. Green coloured, extruded PPR pipes. For use with water up to 85°C.
'KALDE PPR Fittings'. Green coloured, injection moulded PPR fittings. For use with water up to 85°C.
'THERMOTECH PP-R PIPE'. Green coloured (with yellow stripe), extruded PP-R pipe. For use with water up to 85°C.
'THERMOTECH PP-R FITTINGS'. Green coloured, injection moulded PP-R fittings. For use with water up to 85°C.
'PP-01 Magnesium rod plastic joint'. White coloured, injection moulded Polypropylene Magnesium rod plastic joint. For use with water up to 85°C.
'Longsheng-99 PPR Pipe'. Green coloured, extruded PPR pipe. For use with water up to 23°C.
'Atlas PP-R Weld Fittings'. Green coloured, injection moulded PP-R weld fittings. For use with water up to 85°C.
'FLOWTECH PP-R Weld Fittings'. Green coloured, injection moulded PP-R weld fittings. For use with water up to 85°C.
'RAKtherm PPR Pipe'. Green coloured, extruded PPR pipe. For use with water up to 85°C.
'RAKtherm PPR Fittings'. Green coloured, injection moulded PPR fittings. For use with water up to 85°C.
'PROPIPE'. Green coloured, extruded PP-R pipe. For use with water up to 85°C.
'TERRATHERM Pipe'. Extruded, multi-layered PP-RCT/PP-R/PP-R pipe which has a grey coloured inner layer and green coloured outer layer. The three intermediate layers are grey in colour. ‘TERRATHERM Pipe’. Extruded, single layered, green coloured (with red external stripe) PP-R pipe. Both pipes are for use with water up to 85°C.
'TERRATHERM Fittings'. Green coloured, injection moulded PP-R fittings. For use with water up to 70°C.
'MISURATA Polypropylene Fittings'. Black coloured, injection moulded Polypropylene fittings. For use with water up to 23°C.
'Agriflow PN16 Compression Fittings'. Black coloured, injection moulded polypropylene fittings. For use with water up to 23°C.
'Advanced Plastic Factory PPR Pipe'. Green coloured, extruded PPR pipe. For use with water up to 85°C.
'Aquatherm Fittings'. Green coloured, injection moulded PP-RCT fittings. For use with water up to 85°C.
'MD001 PPR Fittings'. Green coloured, injection moulded PPR fittings. For use with water up to 65°C.
'RAKtherm PPR Glass Fiber Reinforced Pipe'. Extruded, multi-layered pipe comprising of a green PPR inner layer, grey, glass-fibre reinforced PPR middle layer and green PPR outer layer. For use with water up to 85°C.
'Hiline Clover-PP-RCT pipe'. Grey coloured, extruded PP-RCT pipe. For use with water up to 85°C.
'Niron BETA Fittings'. Grey coloured, injection moulded polypropylene fittings. For use with water up to 85°C.
'Niron BETA CLIMA Pipe'. Grey coloured, extruded polypropylene (PP-RCT) pipe. For use with water up to 85°C.
'NIRON PP-R Pipe'. Blue coloured, extruded PP-R pipe. For use with water up to 85°C.
'NIRON PP-R Fitting'. Blue coloured, injection moulded PP-R fittings. For use with water up to 85°C.
'System KAN-therm PP Fittings'. Grey coloured, injection moulded PP-R fittings. For use with water up to 85°C.
'KAN-therm PPRCT Pipe'. Grey coloured (with dark grey stripe), extruded PP-R pipe. For use with water up to 85°C.
‘+GF+'. Green coloured, extruded PPR pipe. For use with water up to 85°C.
Page of 1
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
