Directory Search Results

Print List

#250355018

'7644'. Black coloured PE foam tape to be applied as per manufacturer's instructions. For use with water up to 23°C.

Section:
5240 Polyethylene
Section Subtitle:
Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:
250355018
Expiry date:
31/03/2030

Approval Holder:
Gawler Tapes & Plastics Limited
Company Name
Gawler Tapes & Plastics Limited
Address
Unit 3, Easter Court, Goodrich Close, Westerleigh Business Park, Yate, Bristol
Postcode
BS37 5YS

View All Listings by this Company

Print This Approval


#250455040

'ergo 4207 (yellow coloured), 4205 (white coloured) & 4453 (green coloured)'. Anaerobic adhesives to be applied cured in strict accordance with the manufacturer's instructions. For use with water up to 85°C.

Section:
5520 Sealants - Screwed Joints
Section Subtitle:
Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions
WRAS Approval Number:
250455040
Expiry date:
30/04/2030

Approval Holder:
Kisling AG
Company Name
Kisling AG

View All Listings by this Company

Print This Approval


#250302021

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass bodies). The flow is controlled via a solenoid valve, activated via an infra-red sensor and temperature controlled via manual lever. The inlets incorporate single check valves cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
250302021
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, PEX lined flexible hose assemblies incorporating 1/2" BSP (F) captive nut end connections.
Marking:
TCK on body (TK-LT0023) TCK on top of tap (TK-LT-0025) TCK on spout (TK-LT0044, TK-LT0055 & TK-LT-0057)
Installation Requirements:
R001 R006 R010
Expiry date:
31/03/2030
Model:
TK-LT0023 TK-LT0025 TK-LT0044 TK-LT0055 TK-LT0057

Manufacturer:
Xiamen OLT Co., Ltd.
Company Name
Xiamen OLT Co., Ltd.
Address
No.950, Tonglong 2nd Road, Xiamen Torch High-tech Zone (Xiang'an) Industrial Zone, Xiamen City
Country
China

View All Listings by this Company

Print This Approval


#250104706

Range of bottom entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
250104706
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Geberit, model and BS1212-4 on body
Installation Requirements:
R001 R550 R560 R562
Expiry date:
31/01/2030
Model:
136.760.00.1 839.690.00.0 Typ 323 AG H290 bc 1/2" pl 136.761.00.1 839.690.00.0 Typ 323 AG H290 bc 1/2" pl 136.762.00.1 839.744.00.0 Typ 323 AG H319 bc 1/2" pl

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#250402713

Range of single check valve assemblies consisting of a single check valve cartridge housed within a DZR brass body. Compression connections on for use with popper pipe to BS EN1057. Maximum working pressure 16 Bar. Maximum operating temperature 65°C.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
250402713
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see model
Marking:
RWC logo, CR, flow arrow, size, EB on body.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
440 10 04 Single check valve, 15mm compression 440 10 06 Single check valve, 22mm compression 440 10 08 Single check valve, 28mm compression 440 11 04 Single check valve, ½” FBSP 440 11 06 Single check valve, ¾” FBSP 440 11 08 Single check valve, 1” FBSP 440 11 10 Single check valve, 1 ¼” FBSP 440 11 12 Single check valve, 1 ½” FBSP 440 11 16 Single check valve, 2” FBSP

Approval Holder:
Oventrop UK Limited
Company Name
Oventrop UK Limited
Address
Oventrop House Unit 11 Hatch Industrial Park Greywell Road Hatch Basingstoke
Postcode
RG24 7NG
Country
United Kingdom
Phone
+44 (0) 1256 330 441
General Email
mikewise@oventrop.co.uk

View All Listings by this Company
Manufacturer:
Reliance Worldwide Corporation (UK)
Company Name
Reliance Worldwide Corporation (UK)
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company
Manufacturer:
Reliance Worldwide Corporation (UK)
Company Name
Reliance Worldwide Corporation (UK)
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 100 of 146

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.