Directory Search Results

Print List

#2109551

'Orgal® Hydroflex 10'. White coloured, acrylic polymer emulsion cement modifier, which is a liquid additive intended to be mixed with cement to achieve a coating. Mix cement:additive:water in a 197.5:30:10 mass ratio and apply as per manufacturer's instructions '2/18'. Cure for 28 days@23°C and @50% relative humidity. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5051 Concrete, Cement and Mortar
Section Subtitle:
Fibre Additives.
WRAS Approval Number:
2109551
Expiry date:
30/09/2026

Approval Holder:
Organik Kimya San. ve Tic. A.Ş.
Company Name
Organik Kimya San. ve Tic. A.Ş.
Address
Mimarsinan Mah. Cendere yolu no:146 Kemerburgaz, Eyüp, İstanbul
Country
Turkey

View All Listings by this Company

Print This Approval


#2104555

'Sungyoung GRP Water Tank Panel'. Light grey coloured, hot pressed GRP panel. For use with water up to 50°C.

Section:
5120 Glass Reinforced Plastics (GRP)
Section Subtitle:
Components.
WRAS Approval Number:
2104555
Expiry date:
30/04/2026

Approval Holder:
HAYOUNG Corporation.
Company Name
HAYOUNG Corporation.
Address
39, HAEBANCHEON-RO 130 BEON-GIL, GIMHAE-SI, GYEONGNAM
Country
Korea, Republic of
Phone
+82 55 903 0803
General Email
hygrp@naver.com

View All Listings by this Company

Print This Approval


#2110520

'Futurewrap Potable'. Light green coloured GRE material manufactured by hand lay-up. For use with water up to 50°C.

Section:
5125 Glass Reinforced Plastics (GRP)
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2110520
Expiry date:
31/10/2026

Approval Holder:
ECS Ltd.
Company Name
ECS Ltd.
Address
ABZ Business Park, Cirrus Building, 6 International Drive, Dyce Drive, Aberdeen
Postcode
AB21 0BH

View All Listings by this Company

Print This Approval


#2110526

'Acquablu Hose'. Extruded hose comprising of a white coloured (transparent) polyethylene inner layer, off-white coloured chlorobutyl second layer, rayon reinforcement layer and blue coloured bromobutyl outer later. For use with water up to 60°C.

Section:
5140 Hoses & Tubing
Expiry date:
31/10/2026

Approval Holder:
IVG Colbachini Spa
Company Name
IVG Colbachini Spa
Address
Via Fossona 132 Cervarese S Croce 35030
Country
Italy
Phone
+39 049 999 7311

View All Listings by this Company

Print This Approval


#2110534

'TUCAI WRAS EPDM hose'. Black coloured, extruded EPDM hose. Shore hardness 80. Tested in-radius size 0.68mm. For use with water up to 70°C.

Section:
5140 Hoses & Tubing
Expiry date:
31/10/2026

Approval Holder:
Tucai SA
Company Name
Tucai SA
Address
Llobateras 10-12, Poligomo Industrial Santiga, 08210 Barbera Del Valles (Barcelona)
Country
Spain
Phone
+34 93 718 9562

View All Listings by this Company

Print This Approval


#2111514

`HYDROFAS'. Black coloured, extruded polyethylene (PE 80) pipe. For use with water up to 23°C.

Section:
5240 Polyethylene
Section Subtitle:
Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:
2111514
Expiry date:
30/11/2026

Approval Holder:
Fasoplast SA
Company Name
Fasoplast SA
Address
Thessi Dio Pefka, Asprogirgos, 19300 Attica
Country
Greece

View All Listings by this Company

Print This Approval


#2111509

'UP 203 Black & UP 204 Black'. Black coloured polyethylene materials manufactured by rotomoulding. For use with water up to 23°C.

Section:
5245 Polyethylene
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2111509
Expiry date:
30/11/2026

Approval Holder:
Ultrapolymers Group NV
Company Name
Ultrapolymers Group NV
Address
Gerard Mercatorstraat 90, 3920 Lommel
Country
Belgium

View All Listings by this Company

Print This Approval


#2110521

'UP 203 Natural & UP 204 Natural'. Natural (appears white), LLDPE materials manufactured by rotational moulding. For use with water up to 23°C.

Section:
5245 Polyethylene
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2110521
Expiry date:
31/10/2026

Approval Holder:
Ultrapolymers Group NV
Company Name
Ultrapolymers Group NV
Address
Gerard Mercatorstraat 90, 3920 Lommel
Country
Belgium

View All Listings by this Company

Print This Approval


#2110522

'RavaRoto 3850UV black & RavaRoto 3930UV black'. Black coloured LLDPE materials manufactured by rotational moulding. For use with water up to 23°C.

Section:
5245 Polyethylene
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2110522
Expiry date:
31/10/2026

Approval Holder:
Ultrapolymers Group NV
Company Name
Ultrapolymers Group NV
Address
Gerard Mercatorstraat 90, 3920 Lommel
Country
Belgium

View All Listings by this Company

Print This Approval


#2110523

'RavaRoto 3850UV natural & RavaRoto 3930UV natural'. Natural (appear white) LLDPE materials manufactured by rotational moulding. For use with water up to 23°C.

Section:
5245 Polyethylene
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2110523
Expiry date:
31/10/2026

Approval Holder:
Ultrapolymers Group NV
Company Name
Ultrapolymers Group NV
Address
Gerard Mercatorstraat 90, 3920 Lommel
Country
Belgium

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 98 of 1180

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.