'RP380s & RP361'. Off-white coloured (opaque) silicone greases. Apply as per manufacturer's instructions. For use with water up to 65°C.

Section:

5160 Lubricants

Expiry date:

31/03/2031

Approval Holder:

Rutpen Ltd.

Company Name

Rutpen Ltd.

Address

Membury Airfield, Lambourn, Berkshire

Postcode

RG17 7TJ

View All Listings by this Company

‘TECHNYL ® SAFE D 219WFC V30 BK’ & ‘TECHNYL ® SAFE D 219WFC V50 BK’. Black coloured, injection moulded, glass fibre reinforced polyamide 6.10 materials. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

260155011

Expiry date:

31/01/2031

Approval Holder:

POLYTECHNYL S.A.S. Member of DOMO Chemicals

Company Name

POLYTECHNYL S.A.S. Member of DOMO Chemicals

Address

Usine de Belle Etoile, Avenue Albert Ramboz, 69190 SAINT-FONS

Country

France

View All Listings by this Company

'SC1100UR'. Colourless, injection moulded polycarbonate material. For use with water up to 60°C.

Section:

5210 Polycarbonate

Section Subtitle:

Material only. Components made from materials listed in this section be required to be submitted for audit tests.

WRAS Approval Number:

251155028

Expiry date:

30/11/2030

Approval Holder:

Hellyar Plastics

Company Name

Hellyar Plastics

Address

Tyler Way Industrial Estate, Swalecliffe, Whitstable, Kent

Postcode

CT5 2RX

View All Listings by this Company

'POLYNT 1349 TAEQ20 to be used in conjunction with POLYCOR LP PA FC CLEAR 0200'. POLYNT 1349 TAEQ20 is a polyester resin and LP PA FC CLEAR 0200 is a factory applied, gel coat (when used together the material appears light pink in colour). Apply as per manufacturer's TDS ‘7206 Version: 0, 19/11/2020’. Cure for 24 hours@25°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5217 Polyester

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250955065

Expiry date:

30/09/2030

Approval Holder:

Polynt Composites UK limited

Company Name

Polynt Composites UK limited

Address

Laporte Road, Stallingborough, Nr. Grimsby, Lincolnshire

Postcode

DN41 8DR

Phone

+44 1469 572464

View All Listings by this Company

'D.63 Spigot and Electrofusion Fittings'. Black coloured, injection moulded PE100 fittings. For use with water up to 23°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

251155033

Expiry date:

30/11/2030

Approval Holder:

Technima S.A

Company Name

Technima S.A

Address

Thesi Rovista 32009 Schimatari Viotias PO Box 184

Country

Greece

View All Listings by this Company

'HYDRO-FLO'. Green coloured (with red external stripe), extruded PPR pipe. For use with water up to 60°C.

Section:

5260 Polypropylene

Section Subtitle:

Components.

WRAS Approval Number:

251155025

Expiry date:

30/11/2030

Approval Holder:

Apex Piping Systems Limited

Company Name

Apex Piping Systems Limited

Address

27-29 Funzi Road, Off Enterprise Road, Industrial Area, P.O. Box 18441-00500, Nairobi

Country

Kenya

View All Listings by this Company

'Aquaterra Faser Composite Stabil PPR-CT pipe (SDR6, SDR 7.4 & SDR 9)'. Extruded multi-layered pipe comprising of a green coloured PPR-CT inner layer, red coloured PPR/GF middle layer and green coloured PPP-CT outer layer. For use with water up to 85°C.

Section:

5260 Polypropylene

Section Subtitle:

Components.

WRAS Approval Number:

250355096

Expiry date:

31/03/2030

Approval Holder:

Aquagas Plastic Industries LLC

Company Name

Aquagas Plastic Industries LLC

View All Listings by this Company

'TAHWEEL Multi-layered PPR Pipe (Fibre Glass)'. Extruded, multi-layered pipe comprising of a green coloured inner layer, grey coloured fibre second layer, green coloured PPR third layer and black (with grey stripes) coloured PPR outer layer. For use with water up to 60°C.

Section:

5260 Polypropylene

Section Subtitle:

Components.

WRAS Approval Number:

251155027

Expiry date:

30/11/2030

Approval Holder:

Tahweel Integrated Company

Company Name

Tahweel Integrated Company

Address

Plus Tech Park, Rabigh, 21911, P.O Box 610, Rabigh

Country

Saudi Arabia

View All Listings by this Company

'EW-001'. Black coloured, compression moulded EPDM material. Shore hardness 65. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

251055057

Expiry date:

31/10/2030

Approval Holder:

Bilge Kaucuk Makine Yedek Parca San Ic Ve Dis Tic LTD STI

Company Name

Bilge Kaucuk Makine Yedek Parca San Ic Ve Dis Tic LTD STI

Address

Hosab 10, Cadde No 8, Nilufer, Bursa

Country

Turkey

View All Listings by this Company

'KE-551E-U, KE-561E-U, KE-571E-U & KE-581E-U, natural'. Natural (appears white, translucent), extruded VMQ silicone rubber cylinders. Shore hardnesses 50, 60, 70 & 80 A respectively. Tested in-radius sizes between 0.9mm and 21.13mm. For use with water up to 85°C.

Section:

5410 Rubbers

Section Subtitle:

Silicone - components.

WRAS Approval Number:

251155029

Expiry date:

30/11/2030

Approval Holder:

Shin-Etsu Silicones Europe B.V.

Company Name

Shin-Etsu Silicones Europe B.V.

Address

Kasteler Straße 45, 65203 Wiesbaden

Country

Germany

View All Listings by this Company