Range of ‘Isiflo Sprint’ push fit fittings for use with PE100 pipe (manufactured in accordance with EN 12201), for above and below ground use. Isiflo Sprint Family fittings can be installed with seal liners, support liners and without any liner. Maximum working pressure 16 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240604032

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Isiflo, size, flow arrow and date of manufacture (clock wheel)

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

8210052 Repkit IS 20mm (repair kit) 8210053 Repkit IS 25mm (repair kit) 8210054 Repkit IS 32mm (repair kit) 8210055 Repkit IS 40mm (repair kit) 8210056 Repkit IS 50mm (repair kit) 8210057 Repkit IS 63mm (repair kit) 8211002 100 20x20 IS Straight coupl 8211003 100 25x25 IS Straight coupl 8211004 100 32x32 IS Straight coupl 8211005 100 40x40 IS Straight coupl 8211006 100 50x50 IS Straight coupl 8211007 100 63x63 IS Straight coupl 8211020 102 63x32 IS Straight coupl 8211021 102 25x20 IS Straight coupl 8211022 102 32x25 IS Straight coupl 8211023 102 40x32 IS Straight coupl 8211024 102 50x40 IS Straight coupl 8211025 102 63x50 IS Straight coupl 8211026 102 32x20 IS Straight coupl 8211028 102 50x32 IS Straight coupl 8211053 105 25x1" IS Male coupl 8211054 105 32x1 1/4" IS Male coupl 8211055 105 40x1 1/2" IS Male coupl 8211056 105 50x2" IS Male coupl 8211058 105 32x1 1/2" IS Male coupl 8211059 105 32x2" IS Male coupl 8211102 110 20x1/2" IS Male coupl 8211103 110 25x3/4" IS Male coupl 8211104 110 32x1" IS Male coupl 8211105 110 40x1 1/4" IS Male coupl 8211106 110 50x1 1/2" IS Male coupl 8211107 110 63x2" IS Male coupl 8211124 112 32x3/4" IS Male coupl 8211125 112 40x1" IS Male coupl 8211126 112 50x1 1/4" IS Male coupl 8211128 112 32x1/2" IS Male coupl 8211153 115 25x1"IS Female coupl 8211154 115 32x1 1/4"IS Female coupl 8211160 116 50x1"IS Female coupl 8211161 116 40x1"IS Female coupl 8211162 116 20x1/2"IS Female coupl 8211163 116 25x3/4"IS Female coupl 8211164 116 32x1"IS Female coupl 8211165 116 40x1 1/4"IS Female coupl 8211166 116 50x1 1/2"IS Female coupl 8211167 116 63x2"IS Female coupl 8211169 116 32x3/4"IS Female coupl 8211202 120 20x20 IS Elbow 90° 8211203 120 25x25 IS Elbow 90° 8211204 120 32x32 IS Elbow 90° 8211205 120 40x40 IS Elbow 90° 8211206 120 50x50 IS Elbow 90° 8211207 120 63x63 IS Elbow 90° 8211212 121 20x1/2"IS Elbow male cou 8211213 121 25x3/4"IS Elbow male cou 8211214 121 32x1" IS Elbow Male coup 8211215 121 40x1 1/4"IS Elbow male 8211216 121 50x1 1/2"IS Elbow male 8211217 121 63x2"IS Elbow male coup 8211218 121 40x1 1/2"IS Elbow male 8211219 121 32x2" IS Elbow Male coup 8211220 122 25x1"IS Elbow FM 90° 8211221 122 32x1"IS Elbow FM 90° 8211223 122 25x3/4"IS Elbow FM 90° 8211224 122 32x1"IS Elbow FM 90° 8211225 122 40x1 1/4"IS Elbow FM 90° 8211226 122 50x1 1/2"IS Elbow FM 90° 8211227 122 63x2"IS Elbow FM 90° 8211228 122 50x1 1/2"IS Elbow FM 90° 8211229 122 25x3/4"IS Elbow FM 90° 8211234 123 32x32 IS Elbow45° 8211235 123 40x40 IS Elbow45° 8211236 123 50x50 IS Elbow45° 8211237 123 63x63 IS Elbow45° 8211245 124 40x1"IS Elbow Male90° 8211246 124 50x1 1/4"IS Elbow M 90° 8211252 125 20x20x20 IS Tee 8211253 125 25x25x25 IS Tee 8211254 125 32x32x32 IS Tee 8211255 125 40x40x40 IS Tee 8211256 125 50x50x50 IS Tee 8211257 125 63x63x63 IS Tee 8211323 132 25x3/4"x25 IS Tee 8211324 132 32x1"x32 IS Tee 8211325 132 40x1 1/4"x40 IS Tee 8211326 132 50x1 1/2"x50 IS Tee 8211328 132 63x2"x63 IS Tee 8211652 165 20 IS EndCap 8211653 165 25IS EndCap 8211654 165 32IS EndCap 8211655 165 40IS EndCap 8211656 165 50IS EndCap 8211657 165 63IS EndCap 8211802 180 20x2,0Støttehylse SDR11 8211803 180/181 25x2,3 Støttehylse S11 8211804 180 32x3,0Støttehylse SDR11 8211805 180 40x3,7Støttehylse SDR11 8211806 180 50x4,6Støttehylse SDR11 8211807 180 63x5,8Støttehylse SDR11 8211823 182 Seal Liner 25x2,3 8211824 182 Seal Liner 32x3,0 8211825 182 Seal Liner 40x3,7 8211826 182 Seal Liner 50x4,6 8211827 182 Seal Liner 63x5,8 8212293 229 25x25PE DoubleSwivel elbow 8212294 229 32x32PE DoubleSwivel elbow 8212295 229 40x40PE DoubleSwivel elbow 8212296 229 50x50PE DoubleSwivel elbow 8212297 229 63x63PE DoubleSwivel elbow 8216105 110 40x1 1/4"IS m/støttehylse 8216106 110 50x1 1/2"IS m/støttehylse 8216107 110 63x2"IS m/støttehylse 8011729 Muffe 1"R x 3/4"R kompositt 8011739 Muffe 11/2"G x 1"G kompositt 8011749 Muffe 2"Gx 1 1/2"G kompositt 8011516 Muffe 3/4"G kompositt 8011519 Muffe 1"G kompositt 8011523 Muffe 1 1/4"G kompositt 8011526 Muffe 1 1/2"G kompositt 8011533 Muffe 2"G kompositt 8211305 130 40x32x40 Tee

Product Images

Approval Holder:

Isiflo AS

Company Name

Isiflo AS

Address

Enggata 40 Postboks 143 2830 Raufoss Norway

View All Listings by this Company

Manufacturer:

Isiflo AS

Company Name

Isiflo AS

Address

Enggata 40 Postboks 143 2830 Raufoss Norway

View All Listings by this Company

SANHA Press Series 6000 & 16000 and PURAPRESS Series 8000 of press-fit fittings with copper (6000), bronze (8000) and chrome plated copper (16000) bodies and EPDM `O`-rings. For use with copper pipe manufactured in accordance with BS EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240602058

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Sizes are in mm Pressfit

Marking:

Sanha logo, Size and CuSi on body

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

SANHA Press Series 6000: SANHA-Press Bend 90° M/F: 16001A12: 12. 16001A14: 14. 16001A15: 15. 16001A16: 16. 16001A18: 18. 16001A22: 22. 16001A28: 28. 16001A35: 35. 16001A76: 76,1. 16001A89: 88,9. 16001A108: 108,0. 16001L15: 15. SANHA-Press Bend 90° F/F: 16002A12: 12. 16002A14: 14. 16002A15: 15. 16002A16: 16. 16002A18: 18. 16002A22: 22. 16002A28: 28. 16002A76: 76,1. 16002A89: 88,9. 16002A108: 108,0. SANHA-Press Bend 45° M/F: 1604012: 12. 1604014: 14. 1604015: 15. 1604016: 16. 1604018: 18. 1604022: 22. 1604028: 28. 1604076: 76,1. 1604089: 88,9. 16040108: 108,0. SANHA-Press Bend 45° F/F: 1604112: 12. 1604114: 14. 1604115: 15. 1604116: 16. 1604118: 18. 1604122: 22. 1604128: 28. 1604176: 76,1. 1604189: 88,9. 16041108: 108,0. SANHA-Press Full Crossover: 1608512: 12. 1608514: 14. 1608515: 15. 1608516: 16. 1608518: 18. 1608522: 22. 1608528: 28. SANHA-Press Partial crossover: 1608612: 12. 1608614: 14. 1608615: 15. 1608616: 16. 1608618: 18. 1608622: 22. 1608628: 28. SANHA-Press Tee: 1613012: 12. 1613014: 14. 1613015: 15. 1613016: 16. 1613018: 18. 1613022: 22. 1613028: 28. 1613076: 76,1. 1613089: 88,9. 16130108: 108,0. SANHA-Press Tee: 16130121512: 12x15x12. 16130141214: 14x12x14. 16130151212: 15x12x12. 16130151215: 15x12x15. 16130151512: 15x15x12. 16130151815: 15x18x15. 16130152215: 15x22x15. 16130161216: 16x12x16. 16130161414: 16x14x14. 16130161416: 16x14x16. 16130181215: 18x12x15. 16130181218: 18x12x18. 16130181418: 18x14x18. 16130181515: 18x15x15. 16130181518: 18x15x18. 16130181618: 18x16x18. 16130181815: 18x18x15. 16130182218: 18x22x18. 16130221222: 22x12x22. 16130221422: 22x14x22. 16130221515: 22x15x15. 16130221518: 22x15x18. 16130221522: 22x15x22. 16130221622: 22x16x22. 16130221815: 22x18x15. 16130221818: 22x18x18. 16130221822: 22x18x22. 16130222215: 22x22x15. 16130222218: 22x22x18. 16130222822: 22x28x22. 16130281428: 28x14x28. 16130281522: 28x15x22. 16130281528: 28x15x28. 16130281628: 28x16x28. 16130281822: 28x18x22. 16130281828: 28x18x28. 16130282222: 28x22x22. 16130282228: 28x22x28. 16130282815: 28x28x15. 16130282818: 28x28x18. 16130282822: 28x28x22. 16130283528: 28x35x28. 16130762276: 76,1x22x76,1. 16130762876: 76,1x28x76,1. 16130897689: 88,9x76,1x88,9. 1613010876108: 108,0x76,1x108,0. 1613010889108: 108,0x88,9x108,0. 16130L15: 15. SANHA-Press Reducing coupling: 162401412: 14x12. 162401512: 15x12. 162401514: 15x14. 162401614: 16x14. 162401812: 18x12. 162401814: 18x14. 162401815: 18x15. 162401816: 18x16. 162402214: 22x14. 162402215: 22x15. 162402216: 22x16. 162402218: 22x18. 162402815: 28x15. 162402818: 28x18. 162402822: 28x22. SANHA-Press Reducer: 162431412: 14ax12. 162431512: 15ax12. 162431612: 16ax12. 162431614: 16ax14. 162431812: 18ax12. 162431814: 18ax14. 162431815: 18ax15. 162431816: 18ax16. 162432214: 22ax14. 162432215: 22ax15. 162432216: 22ax16. 162432218: 22ax18. 162432815: 28ax15. 162432816: 28ax16. 162432818: 28ax18. 162432822: 28ax22. 162438976: 88,9ax76,1. 1624310876: 108,0ax76,1. 1624310889: 108,0ax88,9. SANHA-Press Coupling: 1627012: 12. 1627014: 14. 1627015: 15. 1627016: 16. 1627018: 18. 1627022: 22. 1627028: 28. 1627076: 76,1. 1627089: 88,9. 16270108: 108,0. SANHA-Press End Cap: 1630112: 12. 1630114: 14. 1630115: 15. 1630116: 16. 1630118: 18. 1630122: 22. 1630128: 28. 1630176: 76,1. 1630189: 88,9. 16301108: 108,0. SANHA-Press Slip coupling: 16270S12: 12. 16270S15: 15. 16270S18: 18. 16270S22: 22. 16270S28: 28. 16270S76: 76,1. 16270S89: 88,9. 16270S108: 108,0. SANHA-Press Coupling: 1627012: 12. 1627014: 14. 1627015: 15. 1627016: 16. 1627018: 18. 1627022: 22. 1627028: 28. 1627076: 76,1. 1627089: 88,9. 16270108: 108,0 Models added September 2024 PuraPress series 6000: SANHA-Press Bend 90° M/F: 16001A35: 35. 16001A42: 42. 16001A54: 54. 16001A64: 64. 16001A67: 67. SANHA-Press Bend 90° F/F: 16002A35: 35. 16002A42: 42. 16002A54: 54. 16002A64: 64. 16002A67: 67. SANHA-Press Bend 45° M/F: 1604035: 35. 1604042: 42. 1604054: 54. 1604064: 64. 1604067: 67. SANHA-Press Bend 45° F/F: 1604135: 35. 1604142: 42. 1604154: 54. 1604164: 64. 1604167: 67. SANHA-Press Tee: 1613035: 35. 1613042: 42. 1613054: 54. 1613064: 64. 1613067: 67. SANHA-Press Tee: 16130351535: 35x15x35. 16130351835: 35x18x35. 16130352222: 35x22x22. 16130352228: 35x22x28. 16130352235: 35x22x35. 16130352828: 35x28x28. 16130352835: 35x28x35. 16130353522: 35x35x22. 16130353528: 35x35x28. 16130421542: 42x15x42. 16130422242: 42x22x42. 16130422842: 42x28x42. 16130423535: 42x35x35. 16130423542: 42x35x42. 16130542254: 54x22x54. 16130542854: 54x28x54. 16130543554: 54x35x54. 16130544254: 54x42x54. 16130644264: 64x42x64. 16130645464: 64x54x64. 16130672867: 67x28x67. 16130673567: 67x35x67. 16130674267: 67x42x67. 16130675467: 67x54x67. 16130763576: 76,1x35x76,1. 16130764276: 76,1x42x76,1. 16130765476: 76,1x54x76,1. 16130766476: 76,1x64x76,1. 16130766776: 76,1x67x76,1. 16130895489: 88,9x54x88,9. 16130896489: 88,9x64x88,9. 1613010854108: 108,0x54x108,0. 1613010864108: 108,0x64x108,0. 1613010867108: 108,0x67x108,0. SANHA-Press Reducing coupling: 162403522: 35x22. 162403528: 35x28. 162404222: 42x22. 162404228: 42x28. 162404235: 42x35. 162405428: 54x28. 162405435: 54x35. 162405442: 54x42. SANHA-Press Reducer: 162433522: 35ax22. 162433528: 35ax28. 162434222: 42ax22. 162434228: 42ax28. 162434235: 42ax35. 162435435: 54ax35. 162435442: 54ax42. 162436442: 64ax42. 162436454: 64ax54. 162436728: 67ax28. 162436735: 67ax35. 162436742: 67ax42. 162436754: 67ax54. 162437635: 76,1ax35. 162437642: 76,1ax42. 162437654: 76,1ax54. 162437667: 76,1ax67. 162438954: 88,9ax54. 162438964: 88,9ax64. 1624310842: 108,0ax42. 1624310854: 108,0ax54. 1624310864: 108,0ax64. 1624310867: 108,0ax67. SANHA-Press Coupling: 1627035: 35. 1627042: 42. 1627054: 54. 1627064: 64. 1627067: 67. SANHA-Press Slip coupling: 16270S35: 35. 16270S42: 42. 16270S54: 54. 16270S64: 64. 16270S67: 67. SANHA-Press End Cap: 1630135: 35. 1630142: 42. 1630154: 54. 1630164: 64. 1630167: 67. SANHA-Press Crimping flange PN 10/16: 1BMPF42: DN 40 / 42 mm. 1BMPF54: DN 50 / 54 mm. 1BMPF67: DN -- / 66,7 mm. 1BMPF76: DN 65 / 76,1 mm. 1BMPF76_DN80: DN 80 / 76,1 mm. 1BMPF89: DN 80 / 88,9 mm. PuraPress series 8000: PURAPRESS Female elbow 90°: 18090221: 22x1. 18090281: 28x1. 1809035114: 35x11/4. 1809042112: 42x11/2. 18090542: 54x2. PURAPRESS Male elbow 90°: 18092221: 22x1. 18092281: 28x1. 1809235114: 35x11/4. 1809242112: 42x11/2. 18092542: 54x2. PURAPRESS Union elbow, flat sealing: 18096221: 22x1. 18096281: 28x1 1809635114: 35x11/4. 1809642112: 42x11/2. 18096542: 54x2. PURAPRESS Tee, female: 181303512: 35x1/2x35. 18130351: 35x1x35. 181304212: 42x1/2x42. 181305412: 54x1/2x54. PURAPRESS Male adaptor: 18243221: 22x1. 18243281: 28x1. 1824328114: 28x11/4. 18243351: 35x1. - 1824335114: 35x11/4. - 1824335112: 35x11/2. - 1824342114: 42x11/4. - 1824342112: 42x11/2. - 1824354112: 54x11/2. - 18243542: 54x2. - 1824364212: 64x21/2. - 1824367212: 67x21/2. - 1824376212: 76,1x21/2. -> PURAPRESS Plug-in adaptor, female: 18246281: 28ax1. 1824635114: 35ax11/4. 1824642112: 42ax11/2. 18246542: 54ax2. PURAPRESS Flow Check Coupling with 2 holes: 18270FC26712: 67x1/2. PURAPRESS Female adaptor: 18270221: 22x1. 18270281: 28x1. 1827028114: 28x11/4. 18270351: 35x1. 1827035114: 35x11/4. 1827035112: 35x11/2. 1827042114: 42x11/4. 1827042112: 42x11/2. 1827054112: 54x11/2. 18270542: 54x2. 1827064212: 64x21/2. 1827067212: 67x21/2. 1827076212: 76,1x21/2. PURAPRESS Plug-in adaptor, male: 18280221: 22ax1. 18280281: 28ax1. 1828035114: 35ax11/4. 1828042112: 42ax11/2. 18280542: 54ax2. PURAPRESS Union, flat sealing: 1833035: 35. 1833042: 42. 1833054: 54. THREADED PURAPRESS Union, female, flat seal.: 18330221: 22x1. 18330281: 28x1. 1833035114: 35x11/4. 1833042112: 42x11/2. 18330542: 54x2. PURAPRESS Union, male, flat sealing: 18333221: 22x1. 18333281: 28x1. 1833335114: 35x11/4. 1833342112: 42x11/2. 18333542: 54x2. PURAPRESS Union adaptor, flat seal.: 18359151: 15x1. 18359181: 18x1. 18359221: 22x1. 1835922114: 22x11/4. 1835922112: 22x11/2. 18359281: 28x1. 1835928114: 28x11/4. 1835928112: 28x11/2. 1835935112: 35x11/2. 18359352: 35x2. 1835942134: 42x13/4. 18359422: 42x2. 1835954238: 54x23/8. 18359763: 76,1x3. 1835989312: 88,9x31/2. PURAPRESS Flange PN10/16: 1PURAPF35: DN 32 / 35 mm. 1PURAPF42: DN 40 / 42 mm. 1PURAPF54: DN 50 / 54 mm. 1PURAPF64: DN -- / 64 mm. 1PURAPF67: DN -- / 67 mm. PuraPress series 16000: SANHA-Press Chrome Male adaptor: 116243G1212: 12x1/2. 116243G1512: 15x1/2. 116243G1812: 18x1/2. 116243G1834: 18x3/4. 116243G2212: 22x1/2. 116243G2234: 22x3/4. 116243G221: 22x1. 116243G2834: 28x3/4. 116243G281: 28x1 116243G28114: 28x11/4. SANHA-Press Chrome Female adaptor: 116270G1212: 12x1/2. 116270G1512: 15x1/2. 116270G1812: 18x1/2. 116270G1834: 18x3/4. 116270G2212: 22x1/2. 116270G2234: 22x3/4 116270G221: 22x1. 116270G2834: 28x3/4. 116270G281: 28x1. 116270G28114: 28x11/4. SANHA-Press Chrome Plug-in adaptor, male: 116280G1212: 12ax1/2. 116280G1512: 15ax1/2. 116280G1812: 18ax1/2. 116280G1834: 18ax3/4. 116280G2212: 22ax1/2. 116280G2234: 22ax3/4. 116280G2834: 28ax3/4. 116280G281: 28ax1. SANHA-Press Chrome Union adaptor, flat seal.: 116359G1212: 12x1/2. 116359G1534: 15x3/4. 116359G181: 18x1.

PuraPress series 8000: PURAPRESS Female elbow 90°: 180901238: 12x3/8. 180901212: 12x1/2. 180901412: 14x1/2. 180901538: 15x3/8. 180901512: 15x1/2. 180901534: 15x3/4. 180901612: 16x1/2. 180901812: 18x1/2. 180901834: 18x3/4. 180902212: 22x1/2. 180902234: 22x3/4. 180902812: 28x1/2. 180902834: 28x3/4. PURAPRESS Male elbow 90°: 180921238: 12x3/8. 180921212: 12x1/2. 180921412: 14x1/2. 180921538: 15x3/8. 180921512: 15x1/2. 180921612: 16x1/2. 180921812: 18x1/2. 180921834: 18x3/4. 180922212: 22x1/2. 180922234: 22x3/4. PURAPRESS Union elbow, flat sealing: 180961212: 12x1/2. 180961512: 15x1/2. 180961812: 18x1/2. 180961834: 18x3/4. 180962234: 22x3/4. PURAPRESS Tee, female: 181301212: 12x1/2x12. 181301412: 14x1/2x14. 181301538: 15x3/8x15. 181301512: 15x1/2x15. 181301612: 16x1/2x16. 181301812: 18x1/2x18. 181302212: 22x1/2x22. 181302234: 22x3/4x22. 181302812: 28x1/2x28. 181302834: 28x3/4x28. PURAPRESS Male adaptor: 182431238: 12x3/8. 182431212: 12x1/2. 182431438: 14x3/8. 182431412: 14x1/2. 182431538: 15x3/8. 182431512: 15x1/2. 182431534: 15x3/4. 182431612: 16x1/2. 182431634: 16x3/4. 182431812: 18x1/2. 182431834: 18x3/4. 182432212: 22x1/2. 182432234: 22x3/4. 182432834: 28x3/4. 18243763: 76,1x3. 18243893: 88,9x3. 182431084: 108,0x4. PURAPRESS Plug-in adaptor, female: 182461212: 12ax1/2. 182461538: 15ax3/8. 182461512: 15ax1/2. 182461812: 18ax1/2. 182461834: 18ax3/4. 182462212: 22ax1/2. 182462234: 22ax3/4. 182462834: 28ax3/4. PURAPRESS Flow Check Coupling with 2 holes: 18270FC27612: 76,1x1/2. 18270FC38934: 88,9x3/4. 18270FC410834: 108,0x3/4. PURAPRESS Female adaptor: 182701238: 12x3/8. 182701212: 12x1/2. 182701438: 14x3/8. 182701412: 14x1/2. 182701538: 15x3/8. 182701512: 15x1/2. 182701534: 15x3/4. 182701612: 16x1/2. 182701634: 16x3/4. 182701812: 18x1/2. 182701834: 18x3/4. 182702212: 22x1/2. 182702234: 22x3/4. 182702834: 28x3/4. 18270893: 88,9x3. PURAPRESS Plug-in adaptor, male: 182801212: 12ax1/2. 182801538: 15ax3/8. 182801512: 15ax1/2. 182801812: 18ax1/2. 182801834: 18ax3/4. 182802212: 22ax1/2. 182802234: 22ax3/4. 182802834: 28ax3/4. PURAPRESS Union, flat sealing: 1833015: 15. 1833018: 18. 1833022: 22. 1833028: 28. PURAPRESS Union, female, flat seal.: 183301512: 15x1/2. 183301534: 15x3/4. 183301812: 18x1/2. 183301834: 18x3/4. 183302234: 22x3/4. 183302834: 28x3/4. PURAPRESS Union, male, flat sealing: 183331238: 12x3/8. 183331212: 12x1/2. 183331512: 15x1/2. 183331534: 15x3/4. 183331812: 18x1/2. 183331834: 18x3/4. 183332212: 22x1/2. 183332234: 22x3/4. 183332834: 28x3/4. PURAPRESS Union adaptor, flat seal.: 183591212: 12x1/2. 183591234: 12x3/4. 183591438: 14x3/8. 183591412: 14x1/2. 183591538: 15x3/8. 183591512: 15x1/2. 183591534: 15x3/4. 183591634: 16x3/4. 183591834: 18x3/4. 183592234: 22x3/4. PURAPRESS Wall Plate, female end and female thread: 184721212: 12x1/2. 184721412: 14x1/2. 184721512: 15x1/2. 184721612: 16x1/2. 184721812: 18x1/2. 184721834: 18x3/4. 184722212: 22x1/2. 184722234: 22x3/4. PURAPRESS Wall plate with universal flange, with female end and female thread: 184731512: 15x1/2. 184732234: 22x3/4. PURAPRESS Double wall plate, both sides female end and female thread: 18478GZ151215: 15x1/2x15. 18478GZ151216: 15x1/2x16. 18478GZ151218: 15x1/2x18. 18478GZ151222: 15x1/2x22. 18478GZ161216: 16x1/2x16. 18478GZ161218: 16x1/2x18. 18478GZ161222: 16x1/2x22. 18478GZ181215: 18x1/2x15. 18478GZ181218: 18x1/2x18. 18478GZ181222: 18x1/2x22. 18478GZ221215: 22x1/2x15. 18478GZ221218: 22x1/2x18. 18478GZ221222: 22x1/2x22. PURAPRESS Mounting unit, female solder ends and female threads: 189761512: 15x1/2. PURAPRESS Installation set for fastening wall plates: 18980G1512: 15x1/2. 18980G1812: 18x1/2. 18980G2212: 22x1/2. PURAPRESS Installation set for fastening double wall plates: 18981G151215: 15x1/2x15. 18981G151218: 15x1/2x18. 18981G151222: 15x1/2x22. 18981G181215: 18x1/2x15. 18981G181218: 18x1/2x18. 18981G181222: 18x1/2x22. 18981G221215: 22x1/2x15. 18981G221218: 22x1/2x18. 18981G221222: 22x1/2x22. PURAPRESS Flange PN10/16: 1PURAPF28: DN 25 / 28 mm. 1PURAPF76: DN 65 / 76,1 mm. 1PURAPF76_DN80: DN 80 / 76,1 mm. 1PURAPF89: DN 80 / 88,9 mm. 1PURAPF108: DN 100 / 108,0 mm. SANHA Press Series 16000: SANHA-Press Chrom Bend 90° M/F: 116001A12: 12. 116001A15: 15. 116001A18: 18. 116001A22: 22. 116001A28: 28. SANHA-Press Chrom Bend 90° F/F: 116002A12: 12. 116002A15: 15. 116002A18: 18. 116002A22: 22. 116002A28: 28. SANHA-Press Chrom Bend 45° M/F: 11604012: 12. 11604015: 15. 11604018: 18. 11604022: 22. 11604028: 28. SANHA-Press Chrom Bend 45° F/F: 11604112: 12. 11604115: 15. 11604118: 18. 11604122: 22. 11604128: 28. SANHA-Press Chrom Full Crossover: 11608512: 12. 11608515: 15. 11608518: 18. 11608522: 22. 11608528: 28. SANHA-Press Chrom Partial crossover: 11608612: 12. 11608615: 15. 11608618: 18. 11608622: 22. 11608628: 28. SANHA-Press Chrom Tee: 11613012: 12. 11613015: 15. 11613018: 18. 11613022: 22. 11613028: 28. 116130121512: 12x15x12. 116130151212: 15x12x12. 116130151215: 15x12x15. 116130151512: 15x15x12. 116130181218: 18x12x18. 116130181515: 18x15x15. 116130181518: 18x15x18. 116130181815: 18x18x15. 116130182218: 18x22x18. 116130221222: 22x12x22. 116130221515: 22x15x15. 116130221522: 22x15x22. 116130221818: 22x18x18. 116130221822: 22x18x22. 116130222215: 22x22x15. 116130222218: 22x22x18. 116130222822: 22x28x22. 116130281522: 28x15x22. 116130281528: 28x15x28. 116130282222: 28x22x22. 116130282228: 28x22x28. 116130282815: 28x28x15. 116130282822: 28x28x22. SANHA-Press Chrom Reducing coupling: 1162401512: 15x12. 1162401812: 18x12. 1162401815: 18x15. 1162402215: 22x15. 1162402218: 22x18. 1162402815: 28x15. 1162402822: 28x22. SANHA-Press Chrom Reducer: 1162431512: 15ax12. 1162431812: 18ax12. 1162431815: 18ax15. 1162432215: 22ax15. 1162432218: 22ax18. 1162432815: 28ax15. 1162432822: 28ax22. SANHA-Press Chrom Male adaptor: 116243G1238: 12x3/8. 116243G1538: 15x3/8. SANHA-Press Chrom Coupling: 11627012: 12. 11627015: 15. 11627018: 18. 11627022: 22. 11627028: 28. SANHA-Press Chrom Female adaptor: 116270G1238: 12x3/8. 116270G1538: 15x3/8. SANHA-Press Chrom Slip coupling: 116270S12: 12. 116270S15: 15. 116270S18: 18. 116270S22: 22. 116270S28: 28. SANHA-Press Chrom Plug-in adaptor, male: 116280G1538: 15ax3/8.

Product Images

Approval Holder:

SANHA GmbH & Co. KG

Company Name

SANHA GmbH & Co. KG

Address

Im Teelbruch 80 Essen

Postcode

45219

Country

Germany

Phone

+32499361070

General Email

nicolas.verspecht@sanha.com

View All Listings by this Company

Manufacturer:

SANHA GmbH & Co. KG

Company Name

SANHA GmbH & Co. KG

Address

Im Teelbruch 80 Essen

Postcode

45219

Country

Germany

Phone

+32499361070

General Email

nicolas.verspecht@sanha.com

View All Listings by this Company

‘POD’ range of indirect and direct heat interface units providing space heating and instantaneous hot water. The heat transfer is generated via plate heat exchangers. The domestic hot water (DHW) circuit incorporates an adjustable temperature mixing valve. The indirect models incorporate an expansion vessel (on the CW inlet of the DHW circuit) and a pressure relief valve set at 3.0 bar (on the space heating circuit). The indirect models only are supplied with a temporary filling loop, which comprises of a stainless steel braided EPDM lined flexible hose assembly and a lever operated spherical valve for connection to the primary circuit. The angled cold water inlet incorporates an isolation valve and a branch to connect to the filling loop, which includes a double check valve assembly (verified by test, suitable for backflow protection against Fluid Category 3). Maximum working pressure for indirect units: Primary circuit: 16.0 bar. Space heating: 2.5 bar. Secondary circuit (DHW): 10.0 bar. Maximum working pressure for direct units: Primary circuit: 10.0 bar. Space heating: 10.0 bar. Secondary circuit (DHW): 10.0 bar. Maximum operating temperature for domestic hot water 65°C. Maximum operating temperature for central heating and primary circuit 85°C.

Section:

1350 Heat Exchangers

Size:

22mm copper pipe connection.

Marking:

Ideal Heating badge and model on adhesive label on front casing. Manufacturer, serial number, model number, pressure rating and other technical information on data label within appliance.

Installation Requirements:

R001 R140 R360

Expiry date:

30/04/2027

Model:

POD i305LOR POD i405LOR POD i505LOR POD i605LOR POD i705LOR

Approval Holder:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Manufacturer:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Shower wastewater heat recovery unit, consisting of a PVC-U waste pipe with an internal copper tube which provides a double wall separation between the wastewater and cold mains supply. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:

1350 Heat Exchangers

WRAS Approval Number:

240602021

Note:

Claims made by the manufacturer on the heat recovery performance have not been assessed as part of the approval.

Size:

½” BSP (M)

Marking:

Zypho logo on body. Zypho logo, model and other information on adhesive label on side of body.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

ZYSL50GDTP Zypho Slim 50

Product Images

Approval Holder:

Zypho, SA

Company Name

Zypho, SA

Country

Portugal

Phone

+351 210 991 351

General Email

b2b@zypho.pt

View All Listings by this Company

Manufacturer:

Zypho, SA

Company Name

Zypho, SA

Country

Portugal

Phone

+351 210 991 351

General Email

b2b@zypho.pt

View All Listings by this Company

Range of electric instantaneous heated showers, incorporating a solenoid valve to control the flow. Products are supplied with a shower hose and handset. Maximum supply pressure 10 bar. Maximum operating temperature 45°C.

Section:

1370 Heaters

Section Subtitle:

Electric instantaneous, shower hose. Heat retained in instantaneous water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

240604704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression.

Marking:

Mira, advanced and model on body and adhesive label on the underside.

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

1.1785.001 - MIRA ADVANCE 8.7KW, 1.1785.002 - MIRA ADVANCE 9.8KW, 1.1785.003 - MIRA ADVANCE 8.7KW FLEX, 1.1785.004 MIRA ADVANCE 9.8KW FLEX, 1.1785.005 MIRA ADVANCE 8.7KW FLEX EXTRA, 1.1785.006 MIRA ADVANCE HEATLOOP 8.7KW,

Product Images

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of water meters with brass bodies and plastic impellers. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN15, DN20, DN25, DN32, DN40, DN50.

Marking:

NWM, Ningbo Water Meter Co., Ltd logo and technical information on meter face. Flow arrow and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

MJ-SDC range.

Approval Holder:

Ningbo Water Meter (Group) Co., Ltd

Company Name

Ningbo Water Meter (Group) Co., Ltd

Address

No 355 Hongxing Road Jiangbei District Ningbo

Country

China

View All Listings by this Company

Range of brass bodied differential angled bypass valves incorporating a spring-loaded adjustment facility. Maximum working pressure 10.0 bar. Maximum operating temperature 110°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

240604003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For close circuit use only.

Size:

See models.

Marking:

Caleffi logo, flow arrow, size moulded on body. Caleffi logo on cap.

Installation Requirements:

R001 R200

Expiry date:

30/04/2029

Model:

519700: 1 ¼" BSP (F), 519500: ¾” BSP (F), 519504: ¾” BSP (F), 519500 TH: ¾” BSP (F), 519500 TAK: ¾" BSP (F), 519505 IPG: ¾ BSP (F).

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Combined bath filler and overflow waste assembly with a plastic body (various finishes - see model). The product incorporates a click type pop-up waste. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

240504008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP.

Marking:

C.P. Hart on underside of click waste insert. C.P. Hart moulded on side of overflow body.

Installation Requirements:

R001 R576

Expiry date:

31/05/2029

Model:

CPH0520 (CP/MB/BRG/BGM/BB/BN/PB） Each product in seven colors CP：Chrome plating MB：Matt black BRG：Brushed rose gold BGM：Gun mental BB：Brushed brass BN：Brushed nickel PB：polished black

Product Images

Approval Holder:

C.P.Hart

Company Name

C.P.Hart

Address

Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford

Postcode

DA2 6QA

Country

United Kingdom

General Email

roy.davis@cphart.co.uk

View All Listings by this Company

Range of single or twin booster pumps with stainless steel bodies and stainless-steel impellers. Maximum working pressure 8.0 Bar Maximum operating temperature 90.0°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240602708

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSPT F 1 ¼” BSPT F 1 ½” BSPT F

Marking:

EBARA logo, model number with additional technical data on adhesive label on body

Installation Requirements:

R001 R415

Expiry date:

30/06/2029

Model:

1970056704I CDE/I 70/05 IE3 1970096604I CDE/I 70/07 IE3 1980096604I CDE/I 120/07 IE3 1980096614I CDE/I 120/106 220/380-460 IE3 1980206604I CDE/I 120/20 IE3 1970106604I CDE/I 90/10 IE3 1970106804I CDE/I 70/12 IE3 1980106604I CDE/I 120/12 IE3 1990106604I CDE/I 200/12 IE3 1990206604I CDE/I 200/20 IE3 1990256604I CDE/I 200/25 IE3 1970056600E CDME/E 70/05 IE2 1970096600E CDME/E 70/07 IE2 1970106600E CDME/E 70/12 IE2 1970106800E CDME/E 90/10 IE2 1980096600E CDME/E 120/07 IE2 1980106600E CDME/E 120/12 IE2 1980206600E CDME/E 120/20 IE2 1990106600E CDME/E 200/12 IE2 1990206600E CDME/E 200/20 IE2 1610036616I CDXE/I 70/076 220/380-460_60 IE3 1610036716I CDXE/I 70/076 220/380-460_60 SCAIE3 1610056616I CDXE/I 70/106 220/380-460_60 IE3 1610056716I CDXE/I 70/106 220/380-460_60 SCA IE3 1610075216I CDXE/I 70/156 220/380-460_60 1615056604I CDXE/I 70/05 IE3 1615056904I CDXE/I 70/05 SCA IE3 1615096504I CDXE/I 70/07 SCA IE3 1615096604I CDXE/I 70/07 IE3 1615106604I CDXE/I 90/10 IE3 1615109704I CDXE/I 90/10 SCA IE3 1620056616I CDXE/I 120/106 220/380-460_60 IE3 1620056716I CDXE/I 120/106 220/380-460_60 SCA IE3 1610075316I CDXE/I 70/156 220/380-460_60 SCA 1620076616I CDXE/I 120/156 220/380-460_60 1620076716I CDXE/I 120/156 220/380-460_60 SC 1620086516I CDXE/I120/206 220/380-460_60 SCA 1625096604I CDXE/I 120/07 IE3 1625096704I CDXE/I 120/07 SCA IE3 1625106304I CDXE/I 120/12 IE3 SCA 1625106604I CDXE/I 120/12 IE3 1625106904I CDXE/I 120/12 SCA IE3 1625206304I CDXE/I 120/20 IE3 SCA 1625206604I CDXE/I 120/20 IE3 1630076616I CDXE/I 200/156 220/380-460_60 1630086616I CDXE/I 200/206 220/380-460_60 1630086716I CDXE/I200/206 220/380-460_60SCA 1630106616I CDXE/I 200/306 220/380-460_60 1630106716I CDXE/I 200/306 220/380-460_60SCA 1635106604I CDXE/I 200/12 IE3 1635106704I CDXE/I 200/12 SCA IE3 1635206604I CDXE/I 200/20 IE3 1635206704I CDXE/I 200/20 SCA IE3 1635256604I CDXE/I 200/25 IE3 1635256704I CDXE/I 200/25 SCA IE3 1610036610E CDXME/E 70/076 220-230_60 IE2 1610056610E CDXME/E 70/106 220-230_60 IE2 1615057400E CDXME/E 70/05 IE2 1615096600E CDXME/E 70/07 IE2 1615106600E CDXME/E 90/10 IE2 1625096600E CDXME/E 120/07 IE2 1625106600E CDXME/E 120/12 IE2 1625206600E CDXME/E 120/20 IE2 1635106600E CDXME/E 200/12 IE2 1635206600E CDXME/E 200/20 IE2 1611106504I 2CDXE/I 70/10 SCA IE3 1611106510I 2CDXE/I 70/106 220/380-460_60 1611106600E 2CDXEM/E 70/10 IE2 1611106604I 2CDXE/I 70/10 IE3 1611106610I 2CDXE/I 70/106 220/380-460_60 SCA 1611126600E 2CDXEM/E 70/12 IE2 1611126604I 2CDXE/I 70/12 IE3 1611126704I 2CDXE/I 70/12 SCA 1611150200E 2CDXEM/E 70/15 IE2 1611156404I 2CDXE/I 70/15 SCA 1611156604I 2CDXE/I 70/15 IE3 1611206600E 2CDXEM/E 70/20 IE2 1611206604I 2CDXE/I 70/20 IE3 1611206804I 2CDXE/I 70/20 SCA IE3 1619206916I 2CDXE/I70/206 220/380-460_60 SCA 1619207516I 2CDXE/I 70/206 220/380-460_60 1619300214I 2CDXE/I 70/306 220/380-460_60 SCA 1619306614I 2CDXE/I 70/306 220/380-460_60 1621150200E 2CDXEM/E 120/15 IE2 1621156600E 2CDXEM/E 120/15 IE2 1621156604I 2CDXE/I 120/15 IE3 1621159604I 2CDXE/I 120/15 SCA 1621206600E 2CDXEM/E 120/20 IE2 1621206604I 2CDXE/I 120/20 IE3 1621206616I 2CDXE/I 120/206 220/380-460_60 1621206716I 2CDXE/I 120/206 220/380-460_60 SCA 1621209604I 2CDXE/I 120/20 SCA IE3 1989306316I 2CDXE/I 120/306 220/380-460_60 1989306404I 2CDXE/I 120/30 IE3 SCA 1989306604I 2CDXE/I 120/30 IE3 1989306816I 2CDXE/I120/306 220/380-460_60SCA 1989400206I 2CDXE/I 120/406 220/380-460_60 1989400216I 2CDXE/I 120/406 220/380-460_60 SCA 1989406604I 2CDXE/I 120/40 IE3 1989406704I 2CDXE/I 120/40 IE3 SCA 1999306604I 2CDXE/I 200/30 IE3 1999309604I 2CDXE/I 200/30 SCA IE3 1999400206I 2CDXE/I 200/406 220/380-460_60 1999406604I 2CDXE/I 200/40 IE3 1999409604I 2CDXE/I 200/40 SCA IE3 1999500206I 2CDXE/I 200/506 220/380-460_60 1999500216I 2CDXE/I 200/506 220/380-460_60 SCA 1999506604I 2CDXE/I 200/50 IE3 1999509604I 2CDXE/I 200/50 IE3 SCA 1999400216I 2CDXE/I 200/406 220/380_460_60SCA 1611100206E 2CDXME/E 70/106 220-230_60 IE2

Product Images

Approval Holder:

Ebara Pumps Europe S.p.A.

Company Name

Ebara Pumps Europe S.p.A.

Address

Via Campo Sportivo, 30 – 38023 Cles (TN)

Country

Italy

Phone

0039 444 706 811

View All Listings by this Company

Manufacturer:

Ebara Pumps Europe S.p.A.

Company Name

Ebara Pumps Europe S.p.A.

Address

Via Campo Sportivo, 30 – 38023 Cles (TN)

Country

Italy

Phone

0039 444 706 811

View All Listings by this Company

Wall outlet with a stainless steel body incorporating a shower handset holder. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240604024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only. This approval does not include a shower hose and handset.

Size:

½” BSP (M).

Marking:

Dolphin Solutions Limited on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

DB3073.x.xx - DOLPHIN BLUE FLEXI HOSE WALL OUTLET & HOLDER. The suffix .x in the above codes will be a number 1 - 5 to denote the finish: .1 to denote brushed/satin polished, .2 to denote mirror polished, .3 to denote brushed/satin polished with PVD coating, .4 to denote mirror polished with PVD coating .5 to denote powder coated. .6 - .9 to denote other material and finish options. For example, DB3073.1 is brushed/satin polished finish. The suffix .xx in above codes is only applicable where the previous suffix is 3 to 5. In this instance xx will be replaced by numbers 00-99 to denote the colour of PVD or powder coat. For example, DB3073.3.50 is brushed/satin polished with Gold PVD coating.

Product Images

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

General Email

Ralph.Mumford@dolphinsolutions.com

View All Listings by this Company