Range of wall hung, gas fired, combination boilers providing domestic hot water via a plate heat exchanger. The primary circuit incorporates an integral expansion vessel and a pressure relief valve set at 3.0 bar. The product is supplied with a rigid pipe filling loop, followed by a separate isolation valve. The filling loop pipe attaches to the cold water inlet valve which incorporates a double check valve assembly (verified by test, suitable for backflow protection against Fluid Category 3) on the branch to the filling loop. The primary circuit includes an isolation valve on the flow and return and is also supplied with two loose 22mm compression isolation valves and a filter. Maximum working pressure of the primary circuit is 2.5 bar and the maximum supply pressure to the secondary circuit is 10.0 bar. Max operating temperature 65°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2207375

Size:

Secondary: 15mm compression. Primary: 22mm compression.

Marking:

I-MINI² printed on front casing. Model and size printed on drop down door.

Installation Requirements:

R001 R140 R360

Expiry date:

31/07/2027

Proviso:

Supplied with a temporary filling loop. The filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999.

Model:

I-MINI²C24 I-MINI²C30 I-MINI²C35

Approval Holder:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Brass fitting Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1478 Heater

Section Subtitle:

Combination boilers - accessories and components.

WRAS Approval Number:

2209322

Size:

10mm spigot (F) x 10mm spigot (M).

Marking:

Navien on body.

Installation Requirements:

R001

Expiry date:

30/09/2027

Model:

LL1466-04-09 Connector.

Product Images

Approval Holder:

KD Navien

Company Name

KD Navien

Address

95, Suworam-gil Seotan-myeon Pyeongtaek-si Gyeonggi-do, Seoul

Country

Korea, Republic of

View All Listings by this Company

Manufacturer:

Zhejiang Double-Lin Valves Co. Ltd.

Company Name

Zhejiang Double-Lin Valves Co. Ltd.

Address

Yanpan Hardware Industrial Area, Ganjiang Town, Yuhuan

Country

China

Phone

+86-576-89915157

View All Listings by this Company

Biofilm and water quality monitor incorporating a stainless-steel body and silicon seals. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2209020

Note:

The monitor has been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 and has not been checked for accuracy by the Scheme.

Size:

¾” female BSP inlet x ¾” male BSP outlet.

Marking:

Sol, Model and product information on adhesive label on side of casing.

Installation Requirements:

R001

Expiry date:

30/09/2027

Model:

Solution MX1

Product Images

Approval Holder:

Waterman Environmental Group

Company Name

Waterman Environmental Group

Address

SOLmicroTEK Ltd., Cotswold Business Centre, 2, AP Ellis Road, Upper Rissington, Gloucestershire

Postcode

GL54 2QB

View All Listings by this Company

Range of single and twin shower booster pumps with plastic bodies and impellers. The pump body inlet incorporates a combined EPDM washer and stainless steel strainer. Maximum working pressure: PL45 & PL45S models - 1.5 bar, PL65 & PL65S models - 2.0 bar. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2212703

Size:

Stainless steel braided EPDM lined flexible hose assemblies with a 15mm standpipe connection on inlets and outlets.

Marking:

Salamander Pumps, model number and other technical data on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/12/2027

Model:

PL45 1.5 bar twin, PL65 2.0 bar twin, PL45S 1.5 bar single, PL65S 2.0 bar single.

Product Images

Approval Holder:

Salamander Pumps

Company Name

Salamander Pumps

Postcode

SR5 3XE

Country

United Kingdom

Phone

0191 535 4528

General Email

lewisw@salamanderpumps.co.uk

View All Listings by this Company

Range of shower handsets and shower heads. The shower handsets have a plastic body (white), NBR ‘O’-rings, and a coloured locking ring around the shower face (see model section). The shower heads have a plastic body (white or chrome plated 02-093173 model), NBR ‘O’-rings, directional adjustment (ball joint) and a coloured interlocking ring either surrounding or central to the shower face (except for the 02-093165 and 02-093173 models which have no ring). The Wall shower T-L models have a combined NBR washer and stainless steel strainer on the inlet.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2209300

Note:

Open outlet used only. Claims made by the manufacturer for antimicrobial properties have not been tested and are not considered part of the approval listing.

Size:

Shower handsets: ½” BSP (M). Shower heads: ½” BSP (F).

Marking:

Shower handsets: T (T Johs. Tandrup A/S logo) on shower handset face. Shower heads: Wall shower T-L models: T (Johs. Tandrup A/S logo) on shower face. Wall shower C-L models: T-safe (brand of Johs. Tandrup A/S) on body. All models, expect for the 02-093173 model, also include a QR code.

Installation Requirements:

R001 R040

Expiry date:

30/09/2027

Proviso:

The product(s) listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.

Model:

Shower handsets: 02-031200 - Shower, S-L (Std. 0,8 Violet), 02-031201 - Shower, S-L (Std. 0,8 Yellow), 02-031202 - Shower, S-L (Std. 0,8 Green), 02-031203 - Shower, S-L (Std. 0,8 Blue), 02-031204 - Shower, S-L (Std. 0,8 light Grey), 02-031190 - Shower T-L (Std. 0,8 A , open Violet lock ring), 02-031191 - Shower T-L (Std. 0,8 A , open yellow lock ring), 02-031192 - Shower T-L (Std. 0,8 A , open Green lock ring), 02-031193 - Shower T-L (Std. 0,8 A , open Blue lock ring), 02-031194 - Shower T-L (Std. 0,8 A , open Grey lock ring). Shower heads: 02-091120 - Wall shower T-L (w. Green Notch), 02-091125 - Wall shower T-L (w. Yellow Notch), 02-091127 - Wall shower T-L (w. Blue Notch), 02-091128 - Wall shower T-L (w. Violet Notch), 02-091129 - Wall shower T-L (w. Grey Notch), 02-093165 - Wall shower C-L (std 1,2 Alpin/Hvid), 02-093167 - Wall shower C-L (std 1,2 Alpin/Violet), 02-093168 - Wall shower C-L (std 1,2 Alpin/Yellow), 02-093171 - Wall shower C-L (std 1,2 Alpin/Green), 02-093172 - Wall shower C-L (std 1,2 Alpin/Blue), 02-093173 - Wall shower C-L (std 1,2 Chrome/Grey 7047).

Product Images

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Manufacturer:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company