Water Regulations Approval Scheme Ltd

Valves

Section Code 2240 : Solenoid, plastic.

WRAS Approval Number: #2311340

Range of plastic solenoid valves with an EPDM diaphragm and ‘O’-rings. The inlets incorporate a stainless-steel strainer (except for push fit inlet models). Push fit connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C. BS6920 70°C.

Section:: 2240 Valves
Section Subtitle:: Solenoid, plastic.
WRAS Approval Number:: 2311340
Size:: see model
Marking:: A. u. K. Müller GmbH & Co. KG logo and flow arrow on body. AuK Muller, model number, date of manufacture (MM/YY) and other technical informatrion on adhesive label on body.
Installation Requirements:: R001
Expiry date:: 30/11/2028
Model:: 51.005.125.xxx. Where xxx denotes inlet and outlet, and is replaced with: 001 = Inlet: Plug Ø 14,8mm and clamp x Outlet: Nozzle Ø 8,4mm with 1 ‘O’-ring. 002 = Inlet: Flange 11.07mm x Outlet: 6mm push fit. 003 = Inlet: Flange 11.07mm x Outlet: 8mm push fit. 004 = Inlet and outlet: 8mm push fit. 005 = Inlet and outlet: 6mm push fit. 006 = Inlet: Plug Ø 14,8mm and clamp/Outlet: Nozzle Ø 8,4mm with 2 ‘O’-rings. 008 = Inlet: Flange 11.07mm x Outlet: Nozzle Ø 8,4mm with 1 ‘O’-ring. 011 = Inlet: Plug Ø 14,8mm and clamp x Outlet: Nozzle Ø 8,4mm with 2 ‘O’-rings. 012 = Inlet: Flange 11.07mm x Outlet: Nozzle Ø 8,4mm with 2 ‘O’-rings. 022 = Inlet: Plug Ø 14,8mm and clamp x Outlet: 8mm push fit.

Product Images

Approval Holder:: A.u.K. Müller GmbH & Co. KG

Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company
Manufacturer:: A.u.K. Müller GmbH & Co. KG

Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

WRAS Approval Number: #2311363

Solenoid valve with a plastic body, EPDM diaphragm and ‘O’-rings. Maximum working pressure 8.0 bar. Can only be used with water at 70°C. BS6920 70°C.

Section:: 2240 Valves
Section Subtitle:: Solenoid, plastic.
WRAS Approval Number:: 2311363
Size:: 31 mm diameter (Push-in connector).
Marking:: A.u.K. Müller, model, voltage, power, orifice size, pressure rating article number, WRAS Approved Product logo and date of manufacture WW/YY on adhesive label on body.
Installation Requirements:: R001 R008
Expiry date:: 30/11/2028
Model:: 50.007.800.

Approval Holder:: A.u.K. Müller GmbH & Co. KG

Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company
Manufacturer:: A.u.K. Müller GmbH & Co. KG

Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

WRAS Approval Number: #241004727

Range of monostable/normally closed pilot operated solenoid valves mounted in plastic bodies. Valve bodies can also be mounted together in multiples. Push-fit connections to be used with PTFE tube. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

Section:: 2240 Valves
Section Subtitle:: Solenoid, plastic.
WRAS Approval Number:: 241004727
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 4mm or 6mm Pushfit.
Marking:: A. u. K. Müller GmbH & Co. KG and logo, type, 6V, DN and pressure rating on adhesive label on body. A. u. K. Müller GmbH & Co. KG logo, CE and date clock month & year moulded on body.
Installation Requirements:: R001 R008
Expiry date:: 31/10/2029
Model:: 19.Y1Y2.Z1Z2Z3 - Miniature valve Y1 = Function (1 = Distribution / 2 = Collection) Y2 = Pilot valve orifice size in mm (0,5- 1,2) Z1 = number of connected housing units Z2 = inlet connection; 1 = Nozzle (tube) / 2 = nozzle (push-fit) / 3 = Push-Fit (4mm) / 4 = Push-Fit (6mm) / 9 = Combination of multiple housings with Inlet 1-4 Z3 = outlet type; 1 = Nozzle (tube) / 2 = nozzle (push-fit) / 3 = Push-Fit (4mm) / 4 = Push-Fit (6mm) / 9 = Combination of multiple housings with Inlet 1-4

Product Images

Manufacturer:: A.u.K. Müller GmbH & Co. KG

Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0

View All Listings by this Company

WRAS Approval Number: #240902713

Range of latching (LV), proportional (PV), servo (SV), pilot (EV) solenoid valves with natural (appear white), plastic bodies. Pushfit models are for use with John Guest LLDPE and DMFIT LLDPE pipes. The inlets and outlets of all models are available with plastic flow regulators or plastic or copper strainers. All valves have a maximum working pressure of 10.0 bar. The bodies of valves with a silicone diaphragm are marked with an ‘S’ at the end of the model, e.g. ‘EV118/AS’ and have a maximum operating temperature 85°C. Valves with an EPDM diaphragm are for cold water use only and do not include this ‘S’ marking.

Section:: 2240 Valves
Section Subtitle:: Solenoid, plastic.
WRAS Approval Number:: 240902713
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: Hydra and model on body.
Installation Requirements:: R001 R008
Expiry date:: 30/09/2029
Model:: EV - Standard (pilot operated) Solenoid Valve - Electrically Operated 220/240, 110/120 VAC. 24, 12 AC/DC LV - Latching (Bi-Stable) Solenoid Valve - Latching (Pulse) Operated 6, 12 VDC PV - Proportional Solenoid Valve - Proportional Operated 12, 24 VDC SV - Servo Solenoid Valve Servo Assisted 12 VDC KEY example – LV118/A LV – Valve type. Outlet number: XX1XX/X: one outlet XX2XX/X: two outlets XX3XX/X: three outlets Outlet angle: XXX18/X: 180 degrees (straight) XXX09/X: 90 degrees (elbow) Body type: XXXXX/xxnn: Variations: XX118/A (3/4" BSP x Ø11mm BARB) XX118/B (Ø3/8" x Ø3/8" PUSHFIT) XX118/C (3/8" BSP x 3/8" BSP) XX118/D (15mm COMPRESSION x 15mm COMPRESSION) XX118/E (3/4" BSP x 3/4" BSP) XX118/EB38 (3/4" BSP x 3/8" PUSHFIT) XX118/EB08 (3/4" BSP x 8mm PUSHFIT) XX118/EB06 (3/4" BSP x 6mm PUSHFIT) XX118/EB14 (3/4" BSP x 1/4" PUSHFIT) XX118/F (3/4" BSP x Ø10mm TUBE) XX118/FE (3/4" BSP x Ø3/8" TUBE) XX118/G (1/2" BSP x 1/2" BSP – SHORT THREAD -14.25MM) XX118/H (3/4" BSP x Ø6mm BARB) XX118/HP (3/4" BSP x Ø11mm BARB + SNAP BRACKET) XX118/HP14 (3/4" BSPM x 1/4" PUSHFIT + SNAP BRACKET) XX118/K (Ø8mm x Ø8mm PUSHFIT) XX118/L (Ø10mm x Ø10mm PUSHFIT) XX118/M (1/2" BSP x 1/2" BSP - LONG) XX118/N (Ø8mm x Ø10mm PUSHFIT) XX118/O (1/2" BSP x 1/2" BSP) XX118/P (Ø3/8" x Ø5/16" PUSHFIT) XX118/S (Ø8mm x Ø6mm PUSHFIT) XX118/T (Ø6mm x Ø6mm PUSHFIT) XX118/U (¼” JG x ¼” JG) XX118/J (3/4" BSP x Ø13mm BARB) XX109/B (3/4" BSP x Ø13mm BARB) XX109/D (3/8" PUSHFIT x 1/4" PUSHFIT) XX109/A (3/4" BSP x Ø11mm BARB) XX209/A (3/4" BSP x Ø11mm BARB) XX209/B (3/4" BSP x Ø13mm BARB) XX218/A (3/4" BSP x Ø11mm BARB) XX218/B (3/4" BSP x Ø10mm TUBE) XX218/C (3/4" BSP x Ø13mm BARB) XX218/D (3/4" BSP x Ø10mm TUBE + Ø11mm BARB) XX218/E (3/4" BSP x Ø3/8" PUSHFIT) XX218/HP (3/4" BSP x Ø11mm BARB + SNAP BRACKET) XX109/SA SAD VALVE (3/4" BSP x Ø11mm BARB) NOTES: Outlet Number: XX1XX/X: One Outlet XX2XX/X: Two Outlets XX3XX/X: Three Outlets Outlet angle: XXX18/X: 180 degrees (straight) XXX09/X: 90 degrees (elbow) Body Type: XXXXX/xxnn: Body type.

Product Images

Approval Holder:: Hydralectric Group Ltd.

Company Name
Hydralectric Group Ltd.
Address
5 High Road, Byfleet, Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company
Manufacturer:: EKI doo

Company Name
EKI doo
Address
Majer 27, 8340 Crnomelj
Country
Slovenia
General Email

View All Listings by this Company

WRAS Approval Number: #241204726

Range of solenoid valves with plastic bodies. The inlets incorporate a plastic flow regulator and optional strainer. Maximum working pressure 10.0 bar. Models which end with ‘H’ have a maximum operating temperature of 85°C. All other models are cold water use only.

Section:: 2240 Valves
Section Subtitle:: Solenoid, plastic.
WRAS Approval Number:: 241204726
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (M). Flat Inlet (suitable for connection with ¾” BSP male).
Marking:: Elbi, model, flow arrow and pressure on body
Installation Requirements:: R001 R008
Expiry date:: 31/12/2029
Model:: Cold water use models: 329 (327 with small size coil) 1 way electrovalve H outlet. 329.M 1 way electrovalve H outlet. 349 (347 with small size coil) 2 ways electrovalve H outlet. 369 (367 with small size coil) 3 ways electrovalve H outlet. 389 (387 with small size coil) 4 ways electrovalve H outlet 329.7 1 ways electrovalve H outlet. 329.9 1 ways electrovalve H outlet. 389.7 2 ways electrovalve small oultets. Hot water use models: 329 H (327 H with small size coil) 1 way H outlet. 349 H (347 H with small size coil) 2 ways H outlet. 369 H (367 H with small size coil) 3 ways H outlet. 389 H (387 H with small size coil) 4 ways H outlet. 329.7 H 1 way H outlet. 329.9 H 1 way H outlet. 329.M H 1 way H outlet.

Product Images

Approval Holder:: Elbi International Spa

Company Name
Elbi International Spa
Address
Via Italia 54 10093 Collegno (TO) Italy

View All Listings by this Company