Range of shower handsets and overhead showers with plastic bodies (various finishes - see model) incorporating EPDM ‘O’-rings and washers. The inlet of the overhead shower models can be supplied with either a washer or a combined washer and stainless-steel strainer. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250312003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet only

Marking:

Jelong, WRAS on handset body or connection.

Installation Requirements:

R001 R040

Expiry date:

31/03/2030

Proviso:

Open outlet only

Model:

A12231* 3F hand shower A12232* 3F hand shower A12131* 3F hand shower A18311* 1F hand shower A12011* 1F hand shower A14431* 3F hand shower A14441* 4F hand shower A15241* 4F hand shower A15331* 3F hand shower B27811* 1F shower head B27012* 1F shower head B26111* 1F shower head B23111* 1F shower head B23011* 1F shower head B23251* 5F shower head For Hand shower * denotes: CH=CHROME PLATED BN=BRUSH NICKEL, GM=GUN METAL, G=GOLD, RG=ROSE GOLD For Shower head * denotes: CH=CHROME PLATED MB=MATT BLACK, W= WHITE, BN=BRUSH NICKEL, ORB=OIL RUBBED BRONZE， GM=GUN METAL, G=GOLD, RG=ROSE GOLD

Product Images

Approval Holder:

Xiamen Jelong Plumbing Co.,Ltd

Company Name

Xiamen Jelong Plumbing Co.,Ltd

Address

Unit 402, No. 598 Guankou South Road Jimei District Xiamen

Country

China

View All Listings by this Company

Manufacturer:

Xiamen Jelong Plumbing Co.,Ltd

Company Name

Xiamen Jelong Plumbing Co.,Ltd

Address

Unit 402, No. 598 Guankou South Road Jimei District Xiamen

Country

China

View All Listings by this Company

Range of wall or ceiling mounted shower outlets with chromium plated bodies (or black body for 22123KF0) consisting of showers arms and shower head for installation with specific rough-in sets. Shower head bodies incorporate approved single check valve cartridges, however, the complete assemblies have not been tested to demonstrate it provides backflow protection. The 26.484 model rough-in set incorporates a plastic flow regulator on the inlet. Maximum working pressure: Open Outlet. Maximum operating temperature: 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250602028

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Any flow rates claimed by the manufacturer have not been verified

Size:

½” BSP (F).

Marking:

Showerheads: Grohe on face. Concealed bodies: Grohe, Date of manufacture (YYMMDD), Made in Germany on adhesive label inside plastic shell, Grohe, DR and Flow arrows on brass body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

Grohe ‘RSH’ Cosmopolitan 310’ headshower sets 400mm: 26.475.xxx & 26.479.xxx. Grohe ‘RSH’ Smart Active 310’ headshower sets 400mm: 22123KF0 Concealed bodies (rough-in sets): 26.483 & 26.484 Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit BE0 – polished nickel DL0 – brushed warm sunset EN0 – brushed nickel GN0 – brushed cool sunrise GL0 – cool sunrise LS0 – moon white A00 – hard graphite

Product Images

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

View All Listings by this Company

Range of shower handsets with plastic bodies and various finishes. Maximum operating temperature 60 °C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250612005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Keekoe on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

H01011, H01023, H02013, H03013, H03021, H04011, H04023, H05014, H05015, H06013, H09015, H11013, H12013, H17015, H20013, H21011, H27015, H28013, H29033, H30043, H31015, H33013, H34013, H34021, H35013, H36011, H34021, H34021, H43014, H46014, H39033, H37013, H39031, H39013, H39043, H49014, H48013, H48021, H46023, H55013, H56013, H41013 & H42013.

Product Images

Approval Holder:

Xiamen Keekoe Sanitary Ware Co. Ltd.

Company Name

Xiamen Keekoe Sanitary Ware Co. Ltd.

Address

No.275-279 Huanzhu Road North Jimei Industrial Zone Xiamen

Country

China

View All Listings by this Company

Range of wall mounted bib tap with brass bodies (various finishes - see model), incorporating either non-rising spindle headworks with cross top operating members or quarter turn ceramic disc headworks with single lever operating members. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.

Section:

1750 Taps

Section Subtitle:

Draw off bib tap(s)

WRAS Approval Number:

250515012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Taizhou Shenglang Sanitary Ware Co., Ltd logo on rear of body.

Installation Requirements:

R001 R040

Expiry date:

31/05/2030

Model:

Non-rising spindle headworks: SL-T40810, SL-T40810B, SL-T40810BB, SL-T40810W, SL-T40810WB, SL-T40810WBB. Quarter turn ceramic disc headworks: SL-T40610, SL-T40610B, SL-T40610BB, SL-T42210, SL-T42210B, SL-T42210BB. Model suffix denotes finish: No suffix: Chrome plated. B suffix: Black. BB suffix: Brushed brass.

Product Images

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Section:

1800 Taps

Description:

A Range of Pillar tap(s).

Deck Mounted Capable of achieving AUK2 Tap Gap

Installation Requirements:

R001 R005

Expiry date:

31/07/2030

Notes & Further Information

1. Various finish: (1) With suffix B: Black (2) With suffix BB: Brushed brass (3) Models SL-T40217, SL-T40218, SL-T40107W, SL-T40108W & SL-T40106W, with suffix G: Champagne Gold

Product Images

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Shenglang Sanitary Ware Co, Ltd.

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Wall Mounted Concealed. Inlets incorporate approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

30/06/2030

Notes & Further Information

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies. Each inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression connections are for use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2310177

Size:

See model.

Marking:

Valtech logo, mix, CR and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

TMVIRCC 14.7mm IRISH- Size TMVIRCC 21mm IRISH- Size TMVCC 15mm TMVCC 22mm TMVMM 1/2” Male TMVMM 3/24 Male

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

1130 Baizhang Road Ningbo Zhejiang

Country

China

View All Listings by this Company

Range of wall mounted self-closing thermostatic shower valves with brass bodies, with a chrome plated dome type operating member. Models are also supplied with a chrome plated shower head with a plastic aerator. Both inlets incorporate stainless steel strainers and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250602015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models:

Marking:

790BOX - Delabie on case cover 790218 – Delabie on button and shower head 790219 – Delabie on button and shower head

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

790BOX – ½” BSP (M) X 3/4" BSP (F) 790218 – ¾” BSP (M) 790219 – ¾” BSP (M)

Product Images

Manufacturer:

Delabie SAS

Company Name

Delabie SAS

Address

1-3 Henderson house Hithercroft Road Wallingford Oxfordshire

Postcode

OX10 9DG

Country

United Kingdom

View All Listings by this Company

Range of concealed thermostatic shower valves, (brass bodies – various finishes) incorporating a quarter turn ceramic disc headwork controlling the flow to the shower outlets. Model VQ15 and VQ16 incorporates a manual diverter to the outlets. Model VQ20 incorporates a single shower outlet and model VQ21 incorporates a double shower outlet. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate approved single check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250602040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) or ¾” BSP (F) inlets and outlets.

Marking:

Model number on body

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

VQ15 VQ16 VQ20 VQ21

Product Images

Manufacturer:

Ultra Finishing Ltd.

Company Name

Ultra Finishing Ltd.

Address

Raikes Lane Ind Est. Lancashire, BL3 2NH

Phone

01282 436934

View All Listings by this Company

Range of normally closed (NC), solenoid valves with plastic bodies and EPDM diaphragm. Models with push-fit connections are for use with copper pipe (manufactured to EN 1057) and PTFE pipe. The products incorporate a plastic or stainless steel filter on the inlet, (except for models with swivel nut, push-fit and nozzle inlets, as well as the 44.007.126 and 01.021.126 models) . The 44.007.126 model incorporates a Y-pattern stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperatures: Cold water use only, 65°C or 90°C for models marked with ℗ - Please consult model section for further details.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

250404711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

AuK Muller, type (model), voltage, maximum water temperature (Tm 23°C, 65°C or 90°C as appropriate), date of manufacture WW/YY on adhesive label on coil. AuK Muller logo, flow arrow, pressure rating and model moulded on body. Models suitable for 90°C are also marked with a ℗ on the base of the body.

Installation Requirements:

R001 R008

Expiry date:

30/04/2030

Model:

Cold water use only models: 01.007.115: Inlet: G 3/8” (M), 01.021.126: Inlet: G 1” (M). 65°C models: 01.007.111: Inlet: G 1/2” (M); G 3/8”(M); G 3/4” (M), 01.007.115: Inlet: G 3/4” (M), 01.007.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Push-Fit; Ø 8 Push-Fit, 44.007.126: Inlet: G 1/2” (M); G 3/4” (M), 29.007.215: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M), 01.010.115: Inlet: G 3/4" (M), 01.010.125: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Nozzle; 3/8” Push-Fit; G 3/4” (F) ; 3/4-11,5 NH (F); G 1/2” (F), 01.010.215: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.216: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.315: Inlet: G 3/4” (M), 01.010.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.415: Inlet: G 3/4” (M), 01.010.425: Inlet: G 3/4” (M), 29.010.226: Inlet: G 3/4” (M), 29.010.326: Inlet: G 3/4” (M), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); 3/4-11,5 NH (M), 01.013.215: Inlet: G 3/4” (M), 01.013.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.017.126: Inlet: G 3/4” (M, 15.017.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 15.017.425: Inlet: G 3/4” (M); 3/4-11,5 NH (M). 90°C models (marked with a ℗): 01.010.115: Inlet: G 1/2” (M); G 3/4 (M), 01.010.125: Inlet: G 3/4” (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F); G 1/2” (F), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F), 01.017.115: Inlet: G 3/4” (M), 01.017.126: Inlet: G 3/4” (M); 3/4-11,5 NH (M).

Product Images

Approval Holder:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Country

Germany

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Manufacturer:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Country

Germany

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Range of spherical valves with DZR brass bodies (chromium plated), chromium plated brass balls, PTFE seat and single lever operating members. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250608014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Conex, size and PN on the body and Conex on lever.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

126013RRR250404 ½” BSP (F), 126013RRR250606 ¾” BSP (F), 126013RRR250808 1” BSP (F), 126013RRR251010 1 1/4” BSP (F), 126013RRR251212 1 ½” BSP (F), 126013RRR251616 2” BSP (F).

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of stop valves with either DZR brass or brass bodies (see models) with T-type operating members. The 15mm, 22mm and 28mm compression sizes are for use with copper pipe (manufactured to EN 1057). The 20mm and 25mm compression sizes are for use PE pipes (manufactured to EN 12201-2). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

250515009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

ZHEJIANG VALOGIN TECHNOLOGY CO., LTD. logo (‘V&G’), WRAS, size, flow arrow and production date (MM-YY) on body. 8511 suffix models are also marked with CR.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Compression models (DZR brass body): 16.20105.015.CP5R-8511: 15mm, 16.20105.022.CP5R-8511: 22mm, 16.20105.028.CP5R-8511: 28mm, 16.20105.820.CP5R-8511: 20mm, 16.20105.840.CP5R-8511: 25mm, 16.20105.811.CP5R-8511: 20mm x 15mm, 16.20105.812.CP5R-8511: 25mm x 15mm, 16.20105.821.CP5R-8511: 25mm x 20mm, 16.20105.831.CP5R-8511: 25mm x 22mm. Compression models (brass body): 16.20105.015.CP5R-8510: 15mm, 16.20105.022.CP5R-8510: 22mm, 16.20105.028.CP5R-8510: 28mm, 16.20105.820.CP5R-8510: 20mm, 16.20105.840.CP5R-8510: 25mm, 16.20105.811.CP5R-8510: 20mm x 15mm, 16.20105.812.CP5R-8510: 25mm x 15mm, 16.20105.821.CP5R-8510: 25mm x 20mm, 16.20105.831.CP5R-8510: 25mm x 22mm. Threaded models (brass body): 16.11005.G15.CP5R-8510: ½” BSP (F) x ½” BSP (F), 16.11005.G20.CP5R-8510: ¾” BSP (F) x ¾” BSP (F), 16.11005.G25.CP5R-8510: 1” BSP (F) x 1” BSP (F).

Product Images

Approval Holder:

Zhejiang Valogin Technology Co., Ltd.

Company Name

Zhejiang Valogin Technology Co., Ltd.

Address

Qinggang Technological Industrial Zone Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Valogin Technology Co., Ltd.

Company Name

Zhejiang Valogin Technology Co., Ltd.

Address

Qinggang Technological Industrial Zone Yuhuan, Zhejiang

Country

China

View All Listings by this Company

'FH821Z2'. Dark grey coloured, pressed & carbonised, resin impregnated carbon bearing. For use with water up to 85°C.

Section:

5022 Carbon

Expiry date:

30/06/2030

Approval Holder:

Schunk Kohlenstofftechnik GmbH

Company Name

Schunk Kohlenstofftechnik GmbH

Address

Rodmeiher Strasse 59, 35452 Heuchelheim

Country

Germany

View All Listings by this Company

'Resicoat PI Brown'. Factory applied, brown coloured epoxy coating. Apply as per manufacturers datasheet dated March 4, 2020. Post-cure for 20 minutes@210°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250555054

Expiry date:

31/05/2030

Approval Holder:

Akzo Nobel Powder Coatings GmbH

Company Name

Akzo Nobel Powder Coatings GmbH

Address

Markwiesenstrasse 50, D72770 Reutlingen

Country

Germany

Phone

+49 7121 519 191

General Email

info@resicoat.com

View All Listings by this Company

'CB Silicone Lubricant Spray (code: F15215)'. Clear, Silicone Lubricant Spray. Apply as per manufacturer's packaging instructions. For use with water up to 85°C.

Section:

5160 Lubricants

Expiry date:

31/05/2030

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

'ISO Resin Topaz-2100-AT'. Beige coloured polyester resin manufactured by hand layup. For use with water up to 45°C.

Section:

5217 Polyester

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250455054

Expiry date:

30/04/2030

Approval Holder:

Industrial Chemicals & Resins Co.

Company Name

Industrial Chemicals & Resins Co.

Address

P.O. Box 7952, 2nd Industrial City, 20th Street, Dammam – 31472

View All Listings by this Company

'Bondrite S1010'. Epoxy putty which has a grey coloured outer layer, a black coloured inner layer and is grey coloured once mixed. Mix layers by hand until a homogenous colour is achieved and then apply as per TDS, issue date November 2021. Cure for 24 hours@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5308 Repair Material

Expiry date:

31/03/2028

Approval Holder:

Bondrite Adhesives Ltd.

Company Name

Bondrite Adhesives Ltd.

Address

Unit 3H Sileby Road Industrial Estate, Barrow Upon Soar, Leicester

Postcode

LE12 8LP

View All Listings by this Company

‘ELASTOSIL® R’ solid silicone rubber materials. The number in brackets indicates shore hardness. Tested in-radius size 1.0mm. The following grades are natural and are for use with water up to 85°C. E indicates ELASTOSIL® AUX Crosslinker E. C1 indicates ELASTOSIL® AUX Crosslinker C1. Grades for extrusion and press moulding: R 401/20 E (shore hardness 20), R 401/30 E (30), R 401/40 E (40), R 401/50 E (50), R 401/55 E (55), R 401/60 E (60), R 401/70 E (70), R 401/80 E (80) & R 401/90 E (90). R 402/60 E (shore hardness 60), R 401/65 E (65) & R 401/75 E (75). R 420/30 E (shore hardness 30), R 420/40 E (40), R 420/50 E (50), R 420/60 E (60) & R 420/70 E (70). Grades for press moulding: R 401/20 C1 (shore hardness 20), R 401/30 C1 (30), R 401/40 C1 (40), R 401/50 C1 (50), R 401/55 C1 (55), R 401/60 C1 (60), R 401/70 C1 (70), R 401/80 C1 (80) & R 401/90 C1 (90). R 402/60 C1 (shore hardness 60) & R 402/75 C1 (75). R 420/30 C1 (shore hardness 30), R 420/40 C1 (40), R 420/50 C1 (50), R 420/60 C1 (60) & R 420/70 C1 (70). R 420/30 C1 & R 420/70 C1. The products may be coloured using the following ELASTOSIL® pigment pastes, also for use with water up to 85°C: PT Yellow RAL 1021. PT Yellow RAL 1016. PT Red RAL 3000 F. PT Red brown RAL 3013. PT Light brown RAL 8003. PT Dark brown RAL 8015. PT Green RAL 6017. PT Ultramarineblue RAL 5002. PT Light blue RAL 5015. PT Grey RAL 7040. PT Deep black RAL 9005. PT Black RAL 9017. PT White RAL 9010.

Section:

5415 Rubbers

Section Subtitle:

Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250655025

Expiry date:

30/06/2030

Approval Holder:

Wacker Chemie AG

Company Name

Wacker Chemie AG

Address

Johannes-Heb-Strasse 24, D-84489, Burghausen

Country

Germany

Phone

Tel: +49 8677 835947 Fax: +49 8677 834142

View All Listings by this Company

Range of single hole, double outlet (fixed) combination tap assemblies (various finishes) with electronically controlled functions to allow the tap to dispense boiling water, chilled water or sparkling water from under counter units (not supplied). All models incorporate a separate vent outlet within the tap spout for the near-boiling water circuit. Near-boiling circuit has a maximum operating temperature 98°C. Hot-water circuit has a maximum operating temperature of 65°C.

Section:

0683 Combination Tap Assemblies

Section Subtitle:

Multiple Function tap(s). In addition to normal tap function includes at least one of following functions chilled, filtered, carbonated, instantaneous hot water.

WRAS Approval Number:

250602049

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only. No flow control device, ‘control centre’ or under-counter units are included as part of this approval. R160 applies to the sparkling water connection only.

Size:

6.35mm LLDPE pipe/ silicone flexible pipe ID 7.7mm x OD 10.95mm

Marking:

Zip logo on tap body.

Installation Requirements:

R001 R006 R009 R010 R160

Expiry date:

30/06/2030

Model:

Chilled water only: 91521 HydroTap Classic Chilled Bright Chrome, 91589 HydroTap Classic Chilled Brushed Chrome, 91591 HydroTap Classic Chilled Matt Black, 91611 HydroTap Wave Chilled Bright Chrome, 91623 HydroTap Classic Plus Chilled Bright Chrome, 91623Z01 HydroTap Classic Plus Chilled Brushed Chrome, 91623Z03 HydroTap Classic Plus Chilled Matt Black. Boiling water only: 91517 HydroTap Classic Boiling Bright Chrome, 91583 HydroTap Classic Boiling Brushed Chrome, 91585 HydroTap Classic Boiling Matt Black, 91607 HydroTap Wave Boiling Bright Chrome, 91619 HydroTap Classic Plus Boiling Bright Chrome, 91619Z01 HydroTap Classic Plus Boiling Brushed Chrome, 91619Z03 HydroTap Classic Plus Boiling Matt Black. Boiling & ambient water: 91518 HydroTap Classic Boiling Ambient Bright Chrome, 91586 HydroTap Classic Boiling Ambient Brushed Chrome, 91588 HydroTap Classic Boiling Ambient Matt Black, 91608 HydroTap Wave Boiling Ambient Bright Chrome, 91620 HydroTap Classic Plus Boiling Ambient Bright Chrome, 91620Z01 HydroTap Classic Plus Boiling Ambient Brushed Chrome, 91620Z03 HydroTap Classic Plus Boiling Ambient Matt Black. Boiling & chilled water: 95272 HydroTap Classic Boiling Chilled Bright Chrome, 91569 HydroTap Classic Boiling Chilled Brushed Chrome, 91582 HydroTap Classic Boiling Chilled Matt Black, 91609Z00 HydroTap Wave Boiling Chilled Bright Chrome, 91609Z03 HydroTap Wave Boiling Chilled Matt Black, 91621Z00 HydroTap Classic Plus Boiling Chilled Bright Chrome, 91621Z01 HydroTap Classic Plus Boiling Chilled Brushed Chrome, 91621Z03 HydroTap Classic Plus Boiling Chilled Matt Black, 91621Z05 HydroTap Classic Plus Boiling Chilled Brushed Rose Gold, 91621Z07 HydroTap Classic Plus Boiling Chilled Brushed Gold, 91621Z11 HydroTap Classic Plus Boiling Chilled Brushed Nickel. Boiling, chilled & sparkling water: 91520 HydroTap Classic Boiling Chilled Sparkling Bright Chrome, 91566 HydroTap Classic Boiling Chilled Sparkling Brushed Chrome, 91581 HydroTap Classic Boiling Chilled Sparkling Matt Black, 91610 HydroTap Wave Boiling Chilled Sparkling Bright Chrome, 91610Z03 HydroTap Wave Boiling Chilled Sparkling Matt Black, 91622 HydroTap Classic Plus Boiling Chilled Sparkling Bright Chrome, 91622Z01 HydroTap Classic Plus Boiling Chilled Sparkling Brushed Chrome, 91622Z03 HydroTap Classic Plus Boiling Chilled Sparkling Matt Black, 91622Z07 HydroTap Classic Plus Boiling Chilled Sparkling Brushed Gold, 91622Z09 HydroTap Classic Plus Boiling Chilled Sparkling Gunmetal, 91622Z11 HydroTap Classic Plus Boiling Chilled Sparkling Brushed Nickel. Chilled & sparkling water: 91522 HydroTap Classic Chilled Sparkling Bright Chrome, 91592 HydroTap Classic Chilled Sparkling Brushed Chrome, 91594 HydroTap Classic Chilled Sparkling Matt Black, 91612 HydroTap Wave Chilled Sparkling Bright Chrome, 91624Z00 HydroTap Classic Plus Chilled Sparkling Bright Chrome, 91624Z01 HydroTap Classic Plus Chilled Sparkling Brushed Chrome, 91624Z03 HydroTap Classic Plus Chilled Sparkling Matt Black. Models added October 2025: Boiling & chilled water: 90887 HydroTap Boiling Chilled 2 Button Top Touch Industrial Tap, 90835 HydroTap 3 Button Industrial Side Touch Tap Boiling Chilled with safety button.

Product Images

Approval Holder:

Zip Heaters UK Ltd T/A Zip Water UK

Company Name

Zip Heaters UK Ltd T/A Zip Water UK

Address

Trafalgar House, Trafalgar Business Park, Dereham

Postcode

NR19 1JG

Country

United Kingdom

Phone

0345 600 5005

General Email

sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Manufacturer:

Zip Industries (Aust) Pty Ltd.

Company Name

Zip Industries (Aust) Pty Ltd.

Address

67 Allingham Street Condell Park NSW 2200

Country

Australia

General Email

View All Listings by this Company

Side entry BS1212-4 (2016) compact type float operated valves for use with WC flushing cisterns. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

240704743

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

BSP1/2” (M) Plastic, BSP1/2” (M) Brass,

Marking:

Flomasta, BS1212-4 & datum line on body.

Installation Requirements:

R001 R550 R560

Expiry date:

31/07/2029

Model:

5059340065700，5059340124032

Approval Holder:

Kingfisher PLC

Company Name

Kingfisher PLC

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Bottom entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns with a plastic body and adjustable float and a plastic flow regulator at the inlet. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

2012121

Size:

½” BSP (M)

Marking:

Plumb Bliss, logo & company website on side of float & BS1212-4 on cap

Installation Requirements:

R001 R550 R560

Expiry date:

31/12/2025

Model:

10.1258

Approval Holder:

Bliss UK Group Ltd

Company Name

Bliss UK Group Ltd

Address

Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire

Postcode

MK43 8TS

Country

United Kingdom

Phone

01234 860230

General Email

accounts@blissukgroup.co.uk

View All Listings by this Company

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 Bar. Cold water use only

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

250602712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

My life, Wras and model number on cistern, 6 Litre mark inside cistern.

Installation Requirements:

R001 R280 R556 R581

Expiry date:

30/06/2030

Model:

MLSOLCC

Product Images

Approval Holder:

MyLife Bathrooms Limited

Company Name

MyLife Bathrooms Limited

Address

Greenbank Industrial Estate Rampart Road Newry Co. Down BT342QU Ireland

View All Listings by this Company

Section:

2011 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.

Wall Mounted Concealed Undefinable Air Gap – See IRN’s Incorporates a check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

30/06/2030

Notes & Further Information

Product Identification(s) with an * as suffix = models added 11/08/2025

Product Images

Approval Holder:

Waterworks Ltd

Company Name

Waterworks Ltd

Address

60 Backus Ave. Danbury

Postcode

CT06810

Country

United States

Phone

2035466207

General Email

mary.kimlinger@waterworks.com

View All Listings by this Company

Range of non-verifiable double check valve assemblies, consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies models HVDCVC-31, HVDCVC-32 are chrome plated. Maximum working pressure 16 Bar Maximum operating temperature 60°C

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

250302721

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

HVDCVC-31, HVDCVC-32 Airaga logo, CR, eco fil & flow arrow on body. Size on nut. Other models: Altecnic logo, flow arrow, size, pressure & CR on body. Models added September 2025: AI-903228 – Airaga logo, flow arrow, CR on body AI-903025 – Altecnic logo, flow arrow, CR, size on body

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

HVDCV-21 (1/2" BSP (F) inlet/outlet) HVDCV-22 (¾” BSP (F) inlet/outlet) HVDCV-24 (1,1/4" BSP (F) inlet/outlet) HVDCV-25 (1,1/2" BSP (F) inlet/outlet) HVDCV-26 (2" BSP (F) inlet/outlet) HVDCVC-31 (15mm compression inlet/outlet) HVDCVC-32 (22mm compression inlet/outlet) Models added Sept 2025: HVDCVC-33 (28mm compression inlet/outlet) HVDCV-23 (1” BSP F inlet/outlet)

Approval Holder:

Herz Valves UK Ltd

Company Name

Herz Valves UK Ltd

Address

Unit 2B, Centurian Business Park Sturrock Way, Bretton Peterborough

Postcode

PE3 8YF

View All Listings by this Company

Range of double check valve assemblies, incorporating two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. Compression connection to be used with copper pipe EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

250504717

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

TS, flow arrow, size, CR, date of manufacture (MM-YY) casted on on body; EN1254-2, size: on compression nut.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

86881 - 15mm, 61921 - 22mm.

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Section:

0440 Headworks

Description:

A Range of Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

Brass body/bodies

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/07/2030

Product Images

Approval Holder:

ZHEJIANG GAOAO SANITARY WARE CO.,LTD.

Company Name

ZHEJIANG GAOAO SANITARY WARE CO.,LTD.

Address

No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province

Postcode

318020

Country

China

General Email

2900324142@qq.com

View All Listings by this Company

Manufacturers:

Zhejiang Gaoao Sanitary Ware Co., Ltd. Jiangkou Branch

Section:

0440 Headworks

Description:

A Range of Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

Plastic body/bodies

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001

Expiry date:

31/08/2030

Product Images

Approval Holder:

Guangdong Hent Technology Co., Ltd

Company Name

Guangdong Hent Technology Co., Ltd

Address

No. 28 Pingsha Dadao Pingsha Industrial Area, Zhishan Town Heshan City 529729 Guangdong

Country

China

View All Listings by this Company

Manufacturers:

Guangdong Hent Technology Co., Ltd.

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck mounted Capable of Achieving AUK3 Tap Gap IRN R160 only applies to model 824B

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010 R160

Expiry date:

30/09/2030

Product Images

Approval Holder:

Taizhou Xinya Sanitary Ware Co. Ltd.

Company Name

Taizhou Xinya Sanitary Ware Co. Ltd.

Address

Qinggang Sci-Tech Industrial Area Yuhuan Zhejiang 317606

Country

P.R.China

View All Listings by this Company

Manufacturers:

Taizhou Xinya Sanitary Ware Co., Ltd

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250702032

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP male.

Marking:

GROHE logo on top of spout

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2030

Model:

25.216.000

Product Images

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Range of two-hole, single outlet (fixed) combination tap assembly (brass bodies – various finishes) incorporating a ceramic cartridge headwork with single lever operating member. Maximum working pressure Bar 10.0 Maximum operating temperature 85°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250788005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Range of stainless steel braided, EPDM lined flexible hose assemblies Incorporating 1/2" BSP captive nut end connections.

Marking:

SCUDO logo, hot & cold indicators on body.

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2030

Model:

TAP307, BLACK304ORBL, BR-BRASS304, SWBR048 PBBR048, SWBR057, PBBR057, SWBR066 PBBR066, SWBR110, SWBR119, TAP249L BLACK249ORBL, BR-BRASS249, SWBR021, PBBR021 SWBR030, PBBR030, SWBR039, PBBR039 SWBR092 & SWBR101

Approval Holder:

Harrison Bathrooms Incorporating Scudo

Company Name

Harrison Bathrooms Incorporating Scudo

Address

Prospect Works Keighley West Yorkshire

Postcode

BD21 4LA

Country

United Kingdom

Phone

01535 663024

General Email

adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Two hole, single outlet fixed combination tap assembly (brass body - various finishes, see model) incorporating quarter turn ceramic disc headworks with single lever operating members. The 2259-XX model incorporates an open outlet spout, all other models incorporate a plastic aerator. The products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250912024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

CARLOTA on spout.

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Model:

2319-XX, 2170-XX, 2303-XX, 2259-XX. Where XX denotes finish and can be replaced with: CR: Chrome, MB: Matte Black, BB: Brushed Brass, BN: Brushed Nickel, GM: Gun Metal.

Product Images

Approval Holder:

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Company Name

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Address

No.10 Jinbo Road, Bingang Industrial Area, Shamen Town, Yuhuan, Zhejiang Province

Country

China

View All Listings by this Company

Two hole, single outlet fixed combination tap assembly (brass body - various finishes, see model) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250912025

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

CARLOTA on spout.

Installation Requirements:

R001 R005 R010

Expiry date:

30/09/2030

Model:

2178-XX. Where XX denotes finish and can be replaced with: CR: Chrome, MB: Matte Black, BB: Brushed Brass, BN: Brushed Nickel, GM: Gun Metal.

Product Images

Approval Holder:

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Company Name

Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Address

No.10 Jinbo Road, Bingang Industrial Area, Shamen Town, Yuhuan, Zhejiang Province

Country

China

View All Listings by this Company

Section:

0520 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

Deck Mounted Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R020

Expiry date:

31/08/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

0530 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

Deck Mounted Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R030

Expiry date:

31/08/2030

Notes & Further Information

1）No Suffix-Chrome 2) -**Represents the following different surface treatments: 1.H = Black 2.DYB = Matte white 3.BZ = Perl white painted 4.HGTS = Red bronze 5.HTL = Yellow bronze brushed 6.Q = Bronze 7.QTSL = Bronze brushed bright 8.QTS = Bronze brushed matte 9.STS = Acid copper brushed 10.SDMGJ = Water plated rose gold 11.N = Nickel brushed bright light 12.NP = Nickel brushed 13.TJ = Titanium gold 14.TJLS = Titanium gold brushed 15.G = Gold 16.GJS = Gold brushed 17.GJSY = Zirconium gold wire drawing matte 18.PGJFY = Zirconium gold wire drawing matte bright light 19.PLSJ = Brushed gold 20.LSJY = Brushed gold matte 21.MGJ = Rose gold 22.MGJL = Rose gold brushed 23.DMGJ = Light rose gold brushed 24.HTS = Red bronze brushed 25.QHP = Grey 26.LSQH = Grey brushed 27.LHMGJ = Brushed yellow rose gold

Product Images

Approval Holder:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Company Name

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Address

Xudou Villiage Qinggang Yuhuan Zhejiang

Postcode

317606

Country

China

Phone

18957382651

General Email

957989256@qq.com

View All Listings by this Company

Manufacturers:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Section:

0550 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a swivel spout.

Deck mounted. Capable of achieving an AUK3 Tap Gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2030

Notes & Further Information

Various finish： (1) Without suffix to current model number: Chrome plated (2) With suffix B: Black (3) With suffix BB: Brushed brass

Product Images

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Shenglang Sanitary Ware Co, Ltd.

Range of three hole, wall mounted, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model) comprising of a spout outlet, a clipsed extension set for accommodating headworks and a trim set with various operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250504023

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

THG etched on body.

Installation Requirements:

R001 R040

Expiry date:

31/05/2030

Model:

40GB/W, 41GB/W, 40SGB/W, 41SGB/W. Styles: 40GB/W-41GB/W • 1900 G25-1900 ; G28-1900 à manettes ; G3M-1900 à manettes métal lisse • BEAUBOURG ST GERMAIN G7A-Beaubourg ; G7B-Beaubourg à manettes ; G7C-Saint-Germain ; G7D-Saint-Germain à manettes • BELUGA G1T-Beluga ; G1U-Beluga à manettes • BEYOND U6F-Beyond Crystal - cristal clair ; U6G-Beyond Crystal - cristal aqua ; U6H-Beyond Crystal - cristal rouge ; U6J-Beyond Crystal - cristal couleur champagne ; U6K-Beyond Crystal - cristal bleu • BROADWAY A04-Broadway à manettes ; A52-Broadway • CHARLESTON D1B-Gatsby ; G29-Charleston ; G3N-Charleston à manettes métal lisse ; G75-Charleston à manettes • COLLECTION O - LES ONDES G4P-Collection "O" ; G8A-Les Ondes ; G8B-Les Ondes à manettes ; U5P-New Paradise • DEAN WEST COAST G7E-Dean ; U9A-West Coast croisillon metal ; U9B-West Coast manette métal ; U9C-West Coast croisillon guilloché lin ; U9D-West Coast manette guilloché lin ; U9E-West Coast croisillon onyx noir ; U9F-West Coast manette onyx noir ; U9G-West Coast croisillon onyx blanc ; U9H-West Coast manette onyx blanc ; G7F-Bondi ; G7G-Bondi à manettes ; G7H-Club Saint-Germain ; G7J-Club Saint-Germain à manettes ; U9I-West Coast manette - insert à définir ; U9J-West Coast croisillons - insert à définir • EMOTION U5K-Camélia cristal noir ; U5L-Camélia cristal clair • ESTRELA U3J-Estrela ; U3K-Estrela à manettes ; U3L-Estrela inserts métal • GRAND CENTRAL U9K-Grand Central croisillon métal ; U9L-Grand Central manette métal ; U9M-Grand Central croisillon onyx noir ; U9N-Grand Central manette onyx noir ; U9P-Grand Central manette - insert à définir ; U9Q-Grand Central croisillon - insert à définir ; U9R-Grand Central croisillon onyx blanc ; U9S-Grand Central manette onyx blanc • HAMPTONS G4R-Hamptons ; G4S-Hamptons à manettes • ICON X U7G-Icon-X ; U7H-Icon-X à manettes ; U7J-Icon-X - insert métal ; U7K-Icon-X à manettes - insert métal ; U7L-Icon-X – Titane ; U7M-Icon-X à manettes – Titane ; U7N-Icon-X, pierre à définir ; U7P-Icon-X à manettes, pierre à définir ; U7S-Icon-X - Carbone or ; U7T-Icon-X à manettes- Carbone or • METAMORPHOSE G3R-Montaigne marbre Grand Antique ; G3S-Montaigne marbre Grand Antique à manettes ; G3T-Montaigne marbre Leonardo Grey ; G3U-Montaigne marbre Leonardo Grey à manettes ; G3V-Montaigne marbre blanc Vénus ; G3W-Montaigne marbre blanc Vénus à manettes ; G6A-Métamorphose ; G6B-Métamorphose à manettes ; G6C-Métamorphose carbone ; G6D-Métamorphose céramique noire ; G6E-Métamorphose céramique blanche ; G6F-Métamorphose à manettes coloris spécifique ; U5N-New Island • ITHAQUE A41-Dahlia ; A7A-Ithaque décor Or ; A7B-Ithaque décor Platine ; A7F-Marquise noir décor Or ; A7G-Marquise blanc décor Platine ; A8M-Vogue Malachite ; A8N-Vogue Jaspe rouge ; A8P-Vogue Onyx noir ; A8R-Vogue Oeil de tigre ; A8S-Vogue Lapis Lazuli ; A9B-Jaipur cristal satiné ; A9C-Jaipur Onyx noir ; A9F-Jaipur métal ; E53-Najem ; U1A-Mandarine métal ; U1D-Mandarine cristal clair ; U1E-Mandarine cristal clair satiné ; U1K-Mandarine Cristallia Diamant ; U5A-Flore ; U5D-Sun Dragon ; U5H-Jade Dragon ; U5J-Rose ; U7A-Trocadéro Malachite ; U7B-Trocadéro Lapis Lazuli • LE 11 U2A-Le 11 ; U2B-Le 11 à manettes • MALMAISON U8B-Monte Carlo porcelaine or ; U8C-Monte Carlo porcelaine or blanc ; U93-Malmaison métal ; U95-Malmaison Portoro • METROPOLIS A2A-Métropolis cristal clair ; A2B-Métropolis cristal clair à manettes ; A2L-Métropolis cristal noir ; A2M-Métropolis cristal noir à manettes • MOSSI A2N-Mossi cristal clair ; U4A-Diplomate bagues lisses ; U4B-Diplomate bagues annelées ; U4C-Diplomate bagues torsadées ; U4D-Diplomate Royale ; U4E-Duomo ; U4F-Duomo cristal ; U5B-Island ; U5C-Paradise ; U6A-Pétale de Cristal clair ; U6B-Pétale de Cristal bleu ; U6C-Pétale de Cristal rouge ; U6D-Pétale de Cristal noir ; U6E-Pétale de Cristal clair liseré doré ; U6M-Mille nuits Cristal clair ; U6N-Mille nuits Cristal couleur Champagne ; U6P-Mille nuits Cristal Brume • NANO G5A-Nano ; G5B-Nano à manettes ; G5D-Anoa • PURE A2R-Masque de Femme lunaire ; A2S-Masque de Femme solaire ; A2T-Masque de Femme, métal gravé ; A2U-Masque de Femme, métal lisse ; G04-Pure ; U5E-Ginkgo ; U5F-Vegetal • PRESTIGE A1J-Amboise Malachite ; A1K-Amboise Lapis Lazuli ; A1L-Amboise Jaspe rouge ; A1M-Amboise Onyx noir ; A1S-Cheverny Malachite ; A1T-Cheverny Lapis Lazuli ; A1U-Cheverny Jaspe rouge ; A1V-Sully Malachite ; A1W-Sully Lapis Lazuli ; A1X-Sully Jaspe rouge ; A2C-Océania ; A2E-Venice ; A2F-Naïade ; A2G-Ange ; A2H-Panthère cristal clair ; A2J-Papillon ; A2K-Panthère cristal noir ; A3T-Amboise Marbre à définir ; A3V-Cheverny Marbre à définir ; U1S-Sully Onyx blanc ; U1V-Cheverny Onyx noir • PROFIL A6A-Profil métal ; A6B-Profil métal à manettes ; A6G-Profil Lalique cristal clair ; A6H-Profil Lalique cristal clair à manettes ; A6N-Profil Onyx noir ; A6P-Profil Onyx noir à manettes • SHAO A33-Bambou cristal noir ; A34-Bambou cristal Ambre ; A35-Bambou cristal clair • SOHO G5E-Soho ; G7K-Soho 2023 • SYSTÈME G9A-SYSTEM métal lisse ; G9B-SYSTEM métal lisse à manettes ; G9C-SYSTEM métal diamant ; G9D-SYSTEM métal diamant à manettes ; G9E-SYSTEM métal quadrillé ; G9F-SYSTEM métal quadrillé à manettes ; G9G-SYSTEM Howlite ; G9H-SYSTEM Howlite à manettes ; G9J-SYSTEM cristal ; G9K-SYSTEM cristal à manettes • YOKO G6G-New Spirit ; G6H-New Spirit à manettes ; G7R-Yoko ; G7S-Yoko Color ; G7T-Yoko Ice ; G7U-Yoko Howlite ; G7V-Yoko Delta ; G7W-Yoko Delta Howlite ; G7X-Yoko - pierre à définir ; G7Y-Yoko Delta - insert pierre (triangle) à définir • ZOOM U4J-ZOOM Five ; U4K-ZOOM Seven ; U4L-ZOOM Twelve 40SGB/W – 41SGB/W • ART DECO A54-Art Déco ; A55-Art Déco à manettes ; A56-Art Déco Cristal ; A57-Tradition ; A58-Tradition à manettes ; A59-Tradition Cristal • FAUBOURG G2F-Le 9 - pierre à définir ; G2H-Le 9 Howlite ; G2I-Le 9 Nero Marquina ; G2J-Faubourg porcelaine blanche à manettes ; G2K-Faubourg porcelaine blanche ; G2L-Faubourg porcelaine noire ; G2M-Faubourg porcelaine noire à manettes ; G2N-Froufrou ; G2P-Froufrou à manettes ; G2R-Frivole ; G2S-Frivole à manettes ; G2T-Faubourg métal ; G2U-Faubourg métal à manettes ; G58-Spirit à manettes ; G69-Spirit • NIHAL U2L-Nihal porcelaine bleue ; U2M-Nihal métal lisse ; U2N-Nihal porcelaine ivoire ; U2P-Nihal porcelaine noire ; U2R-Nihal porcelaine verte ; U2S-Nihal porcelaine rouge • POMME A42-Pomme cristal clair satiné ; A46-Pomme cristal lustré or ; U2D-INFINI porcelaine blanche ; U2E-INFINI porcelaine blanche décor platine ; U2F-INFINI porcelaine blanche décor or • WEST COAST / GRAND CENTRAL U9A-West Coast croisillon métal ;U9B-West Coast manette métal ; U9C-West Coast croisillon guilloché lin ; U9D-West Coast manette guilloché lin ; U9E-West Coast croisillon onyx noir ; U9F-West Coast manette onyx noir ; U9G-West Coast croisillon onyx blanc ; U9H-West Coast manette onyx blanc ; U9I-West Coast manette - insert à définir ; U9J-West Coast croisillons - insert à définir ; U9K-Grand Central croisillon métal ; U9L-Grand Central manette métal ; U9M-Grand Central croisillon onyx noir ; U9N-Grand Central manette onyx noir ; U9P-Grand Central manette - insert à définir ; U9Q-Grand Central croisillon - insert à définir ; U9R-Grand Central croisillon onyx blanc ; U9S-Grand Central manette onyx blanc Finish : A02-Polished Chrome ; A13-Smoked Brass ; B01-Polished Nickel ; C01-Matte Nickel ; C02-Matte Chrome ; C27-Unlacquered Brass ; C47-Smoked Nickel ; D01-Light Bronze Lacquered ; D05-Lacquered Matte Bronze ; D12-Polished Brass Lacquered ; D15-Polished Black Lacquered ; D16-White Lacquered ; D18-Matte Black lacquered ; D21-Old Oil-Rubbed Bronze ; D24-Aranja ; H17-Matt Aranja ; F01-Polished Gold ; F07-Matte Gold ; F18-Rhodium Silver ; F19-Matt Rhodium Silver ; F27-Rose Gold ; F30-Soft Gold ; F31-Matte Soft Gold ; F33-Brown Bronze PVD ; F34-Matte Brown Bronze PVD ; G01-Polished Nickel/Polished Gold ; G02-Polished Chrome/Polished Gold ; H03-Lacquered Antique Silver ; H07-Varnished Matte Antique Red Copper ; H08-Lacquered Matte Antique Silver ; H24-Lacquered Antique Copper ; H28-Antique Nickel ; H49-Brass PVD ; H50-Matte Brass PVD ; H52-Gold PVD ; H53-Matte Gold PVD ; H55-Nickel PVD ; H56-Matte Nickel PVD ; H60-Matte Blush PVD ; H62-Blush PVD ; H64-Graphite PVD ; H65-Matte Graphite PVD ; H66-Umber PVD ; H67-Matte Umber PVD For explanation: A complete code number compile three information’s, for example: A54-A02-41SGB/W (SERIE-FINISH-ARTICLE). This would give you a trim only for wall mounted 3-hole bath mixer in art deco style and polished chrome finish.

Product Images

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Wall Mounted Undefinable Air Gap – See IRN’s

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/08/2030

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish Products need to be installed in combination with basic set 10303180.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturers:

Hansgrohe SE

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Wall Mounted Undefinable Air Gap - See IRN's Product requires a manifold which is not supplied as part of this approval.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

31/10/2030

Notes & Further Information

Where xxx denotes finish, can be replaced by: 002 – Chrome DC2 – Supersteel DA2 – Warm sunset AL2 – Brushed hard graphite A02 – hard graphit DL2 – brushed warm sunset GN2 – brushed cool sunrise A02 – hard graphite MS2 – satin steel GL2 – cool sunrise MS2 – satin graphite

Product Images

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Manufacturers:

Grohe AG

Range of filling loop assemblies consisting of an in-line isolation valve, an in-line double check valve assembly (suitable for back flow protection against fluid category 3) that incorporates an isolation valve and a stainless-steel braided EPDM lined hose. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1015 Filling Loop

Size:

15mm compression or 15mm pushfit.

Marking:

Altecnic logo, flow arrow and CR on valve. Altecnic, WRAS and date of manufacture (YYYY) on hose.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

521726, 941192.

Approval Holder:

City Plumbing

Company Name

City Plumbing

Address

Highbourne House, 1 Eldon Way, Crick, Northamptonshire

Postcode

NN6 7SL

View All Listings by this Company

Manufacturer:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

View All Listings by this Company

Range of M profile copper press fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404076

Size:

see models

Marking:

Brand name MAMBA, size, month/year & WRAS on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

MAMBA Range: STRAIGHT COUPLING CxC: 60111515 15mm PRESSFIT COUPLER 60112222 22mm PRESSFIT COUPLER 60112828 28mm PRESSFIT COUPLER 60113535 35mm PRESSFIT COUPLER 60114242 42mm PRESSFIT COUPLER 60115454 54mm PRESSFIT COUPLER SLIP COUPLING C x C: 60171515 15mm PRESSFIT SLIP COUPLER 60172222 22mm PRESSFIT SLIP COUPLER 60172828 28mm PRESSFIT SLIP COUPLER 60173535 35mm PRESSFIT SLIP COUPLER 60174242 42mm PRESSFIT SLIP COUPLER 60175454 54mm PRESSFIT SLIP COUPLER REDUCING COUPLING C x C: 60112215 22mm X 15mm PRESSFIT REDUCING COUPLER 60112815 28mm X 15mm PRESSFIT REDUCING COUPLER 60112822 28mm X 22mm PRESSFIT REDUCING COUPLER 60113515 35mm X 15mm PRESSFIT REDUCING COUPLER 60113522 35mm X 22mm PRESSFIT REDUCING COUPLER 60113528 35mm X 28mm PRESSFIT REDUCING COUPLER 60114215 42mm X 15mm PRESSFIT REDUCING COUPLER 60114222 42mm X 22mm PRESSFIT REDUCING COUPLER 60114228 42mm X 28mm PRESSFIT REDUCING COUPLER 60114235 42mm X 35mm PRESSFIT REDUCING COUPLER 60115415 54mm X 15mm PRESSFIT REDUCING COUPLER 60115422 54mm X 22mm PRESSFIT REDUCING COUPLER 60115428 54mm X 28mm PRESSFIT REDUCING COUPLER 60115435 54mm X 35mm PRESSFIT REDUCING COUPLER 60115442 54mm X 42mm PRESSFIT REDUCING COUPLER FITTING REDUCER F x C: 60132215 22mm X 15mm PRESSFIT FITTNG REDUCER 60132815 28mm X 15mm PRESSFIT FITTNG REDUCER 60132822 28mm X 22mm PRESSFIT FITTNG REDUCER 60133515 35mm X 15mm PRESSFIT FITTNG REDUCER 60133522 35mm X 22mm PRESSFIT FITTNG REDUCER 60133528 35mm X 28mm PRESSFIT FITTNG REDUCER 60134215 42mm X 15mm PRESSFIT FITTNG REDUCER 60134222 42mm X 22mm PRESSFIT FITTNG REDUCER 60134228 42mm X 28mm PRESSFIT FITTNG REDUCER 60134235 42mm X 35mm PRESSFIT FITTNG REDUCER 60135415 54mm X 15mm PRESSFIT FITTNG REDUCER 60135422 54mm X 22mm PRESSFIT FITTNG REDUCER 60135428 54mm X 28mm PRESSFIT FITTNG REDUCER 60135435 54mm X 35mm PRESSFIT FITTNG REDUCER 60135442 54mm X 42mm PRESSFIT FITTNG REDUCER 90DEG ELBOW C x C: 60411515 15mm PRESSFIT ELBOW 60412222 22mm PRESSFIT ELBOW 60412828 28mm PRESSFIT ELBOW 60413535 35mm PRESSFIT ELBOW 60414242 42mm PRESSFIT ELBOW 60415454 54mm PRESSFIT ELBOW 90DEG STREET ELBOW F x C: 60431515 15mm PRESSFIT STREET ELBOW 60432222 22mm PRESSFIT STREET ELBOW 60432828 28mm PRESSFIT STREET ELBOW 60433535 35mm PRESSFIT STREET ELBOW 60434242 42mm PRESSFIT STREET ELBOW 60435454 54mm PRESSFIT STREET ELBOW 45DEG ELBOW C x C: 60451515 15mm PRESSFIT OBTUSE ELBOW 60452222 22mm PRESSFIT OBTUSE ELBOW 60452828 28mm PRESSFIT OBTUSE ELBOW 60453535 35mm PRESSFIT OBTUSE ELBOW 60454242 42mm PRESSFIT OBTUSE ELBOW 60455454 54mm PRESSFIT OBTUSE ELBOW 45DEG STREET ELBOW F x C: 60481515 15mm PRESSFIT OBTUSE STREET ELBOW 60482222 22mm PRESSFIT OBTUSE STREET ELBOW 60482828 28mm PRESSFIT OBTUSE STREET ELBOW 60483535 35mm PRESSFIT OBTUSE STREET ELBOW 60484242 42mm PRESSFIT OBTUSE STREET ELBOW 60485454 54mm PRESSFIT OBTUSE STREET ELBOW CAP C x C: 60811515 15mm PRESSFIT STOP END 60812222 22mm PRESSFIT STOP END 60812828 28mm PRESSFIT STOP END 60813535 35mm PRESSFIT STOP END 60814242 42mm PRESSFIT STOP END 60815454 54mm PRESSFIT STOP END EQUAL TEE C x C: 60151515 15mm PRESSFIT TEE 60222222 22mm PRESSFIT TEE 60282828 28mm PRESSFIT TEE 60353535 35mm PRESSFIT TEE 60424242 42mm PRESSFIT TEE 60545454 54mm PRESSFIT TEE PART CROSSOVER F x C: 60271515 15mm PRESSFIT PART CROSSOVER 60272222 22mm PRESSFIT PART CROSSOVER CROSSOVER C x C: 60291515 15mm PRESSFIT FULL CROSSOVER 60292222 22mm PRESSFIT FULL CROSSOVER REDUCER ELBOW 60412215 22mm X 15mm PRESSFIT REDUCING ELBOW REDUCING TEE: 60221515 22mm X 15mm X 15mm PRESSFIT REDUCING TEE 60221522 22mm X 15mm X 22mm PRESSFIT REDUCING TEE 60282222 28mm X 22mm X 22mm PRESSFIT REDUCING TEE 60282228 28mm X 22mm X 28mm PRESSFIT REDUCING TEE 60222215 22mm X 22mm X 15mm PRESSFIT REDUCING TEE 60282815 28mm X 28mm X 15mm PRESSFIT REDUCING TEE 60282822 28mm X 28mm X 22mm PRESSFIT REDUCING TEE 60353515 35mm X 35mm X 15mm PRESSFIT REDUCING TEE 60353522 35mm X 35mm X 22mm PRESSFIT REDUCING TEE 60353528 35mm X 35mm X 28mm PRESSFIT REDUCING TEE 60424215 42mm X 42mm X 15mm PRESSFIT REDUCING TEE 60424222 42mm X 42mm X 22mm PRESSFIT REDUCING TEE 60424228 42mm X 42mm X 28mm PRESSFIT REDUCING TEE 60424235 42mm X 42mm X 35mm PRESSFIT REDUCING TEE 60545415 54mm X 54mm X 15mm PRESSFIT REDUCING TEE 60545422 54mm X 54mm X 22mm PRESSFIT REDUCING TEE 60545428 54mm X 54mm X 28mm PRESSFIT REDUCING TEE 60545435 54mm X 54mm X 35mm PRESSFIT REDUCING TEE 60545442 54mm X 54mm X 42mm PRESSFIT REDUCING TEE

Product Images

Approval Holder:

MDS Global Sourcing Ltd

Company Name

MDS Global Sourcing Ltd

Address

10 Alesbury Court Lapworth

Postcode

B94 6BE

Country

United Kingdom

Phone

07771 755057

General Email

scott@mdsgroup.co.uk

View All Listings by this Company

Range of stainless-steel(SS304L) press fittings with EPDM ‘O’-rings for use with stainless-steel pipe to EN10312. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

MTF, model number, Size on fitting

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Coupling GDC5001 OD15 GDC5002 OD18 GDC5003 OD22 GDC5004 OD28 GDC5005 OD35 GDC5006 OD42 GDC5007 OD54 GDC6501 OD66.7 GDC5008 OD76.1 GDC5009 OD88.9 GDC5010 OD108 Long Coupling GDC5011 OD15 GDC5012 OD18 GDC5013 OD22 GDC5014 OD28 GDC5015 OD35 GDC5016 OD42 GDC5017 OD54 GDC6502 OD66.7 GDC5018 OD76.1 GDC5019 OD88.9 GDC5020 OD108 Reducer with Plain End GDC5021 OD18×OD15 GDC5022 OD22×OD15 GDC5023 OD22×OD18 GDC5024 OD28×OD15 GDC5025 OD28×OD18 GDC5026 OD28×OD22 GDC5048 OD35×OD15 GDC5027 OD35×OD18 GDC5029 OD35×OD22 GDC5030 OD35×OD28 GDC5031 OD42×OD15 GDC5032 OD42×OD18 GDC5033 OD42×OD22 GDC5034 OD42×OD28 GDC5035 OD42×OD35 GDC5036 OD54×OD15 GDC5037 OD54×OD18 GDC5038 OD54×OD22 GDC5039 OD54×OD28 GDC5040 OD54×OD35 GDC5041 OD54×OD42 GDC6503 OD66.7×OD42 GDC6504 OD66.7×OD54 GDC5028 OD76.1×OD42 GDC5042 OD76.1×OD54 GDC6505 OD76.1×OD66.7 GDC5049 OD88.9×OD42 GDC5043 OD88.9×OD54 GDC6506 OD88.9×OD66.7 GDC5044 OD88.9×OD76.1 GDC5045 OD108×OD54 GDC6507 OD108×OD66.7 GDC5046 OD108×OD76.1 GDC5047 OD108×OD88.9 90° Elbow GDC6051 OD15 GDC6052 OD18 GDC6053 OD22 GDC6054 OD28 GDC6055 OD35 GDC6056 OD42 GDC6057 OD54 GDC6511 OD66.7 GDC6058 OD76.1 GDC6059 OD88.9 GDC6060 OD108 90° Elbow with Plain End GDC6071 OD15 GDC6072 OD18 GDC6073 OD22 GDC6074 OD28 GDC6075 OD35 GDC6076 OD42 GDC6077 OD54 GDC6512 OD66.7 GDC6078 OD76.1 GDC6079 OD88.9 GDC6080 OD108 45° Elbow GDC6101 OD15 GDC6102 OD18 GDC6103 OD22 GDC6104 OD28 GDC6105 OD35 GDC6106 OD42 GDC6107 OD54 GDC6513 OD66.7 GDC6108 OD76.1 GDC6109 OD88.9 GDC6110 OD108 45° Elbow with Plain End GDC6121 OD15 GDC6122 OD18 GDC6123 OD22 GDC6124 OD28 GDC6125 OD35 GDC6126 OD42 GDC6127 OD54 GDC6514 OD66.7 GDC6128 OD76.1 GDC6129 OD88.9 GDC6130 OD108 Tee GDC5181 OD15 GDC5182 OD18 GDC5183 OD22 GDC5184 OD28 GDC5185 OD35 GDC5186 OD42 GDC5187 OD54 GDC6515 OD66.7 GDC5188 OD76.1 GDC5189 OD88.9 GDC5190 OD108 Reducing Tee GDC5191 OD18×OD15 GDC5192 OD22×OD15 GDC5193 OD22×OD18 GDC5194 OD28×OD15 GDC5195 OD28×OD18 GDC5196 OD28×OD22 GDC5197 OD35×OD15 GDC5198 OD35×OD18 GDC5199 OD35×OD22 GDC5200 OD35×OD28 GDC5201 OD42×OD15 GDC5202 OD42×OD18 GDC5203 OD42×OD22 GDC5204 OD42×OD28 GDC5205 OD42×OD35 GDC5206 OD54×OD15 GDC5207 OD54×OD18 GDC5208 OD54×OD22 GDC5209 OD54×OD28 GDC5210 OD54×OD35 GDC5211 OD54×OD42 GDC6517 OD66.7×OD22 GDC6518 OD66.7×OD28 GDC6519 OD66.7×OD35 GDC6520 OD66.7×OD42 GDC6521 OD66.7×OD54 GDC5212 OD76.1×OD22 GDC5213 OD76.1×OD28 GDC5214 OD76.1×OD35 GDC5215 OD76.1×OD42 GDC5216 OD76.1×OD54 GDC6522 OD76.1×OD66.7 GDC5217 OD88.9×OD22 GDC5218 OD88.9×OD28 GDC5219 OD88.9×OD35 GDC5220 OD88.9×OD42 GDC5221 OD88.9×OD54 GDC6523 OD88.9×OD66.7 GDC5222 OD88.9×OD76.1 GDC5223 OD108×OD22 GDC5224 OD108×OD28 GDC5225 OD108×OD35 GDC5226 OD108×OD42 GDC5227 OD108×OD54 GDC6524 OD108×OD66.7 GDC5228 OD108×OD76.1 GDC5229 OD108×OD88.9 Tee with Male Thread End GDC5231 OD15×R1/2 GDC5232 OD18×R1/2 GDC5239 OD22×R1/2 GDC5233 OD22×R3/4 GDC5234 OD22×R1 GDC5240 OD28×R1/2 GDC5283 OD28×R3/4 GDC5235 OD28×R1 GDC5281 OD35×Rp3/4 GDC5236 OD35×Rp1 1/4 GDC5237 OD42×Rp1 1/2 GDC5282 OD54×Rp1/2 GDC5238 OD54×Rp2 Tee with Female Thread End GDC5241 OD15×Rp1/2 GDC5242 OD18×Rp1/2 GDC5243 OD18×Rp3/4 GDC5244 OD22×Rp1/2 GDC5245 OD22×Rp3/4 GDC5246 OD28×Rp1/2 GDC5247 OD28×Rp3/4 GDC5248 OD28×Rp1 GDC5249 OD35×Rp1/2 GDC5250 OD35×Rp3/4 GDC5262 OD35×Rp1 GDC5263 OD35×Rp1 1/4 GDC5251 OD42×Rp1/2 GDC5252 OD42×Rp3/4 GDC5264 OD42×Rp1 GDC5265 OD42×Rp1 1/2 GDC5253 OD54×Rp1/2 GDC5254 OD54×Rp3/4 GDC5266 OD54×Rp1 GDC5255 OD54×Rp2 GDC6531 OD66.7×Rp1/2 GDC6532 OD66.7×Rp3/4 GDC6533 OD66.7×Rp1 1/2 GDC5256 OD76.1×Rp3/4 GDC5257 OD76.1×Rp2 GDC5258 OD88.9×Rp3/4 GDC5259 OD88.9×Rp2 GDC5260 OD108×Rp3/4 GDC5261 OD108×Rp2 Adaptor with Male Thread End GDC5360 OD15×R3/8 GDC5361 OD15×R1/2 GDC5362 OD15×R3/4 GDC5363 OD18×R1/2 GDC5364 OD18×R3/4 GDC5365 OD22×R1/2 GDC5366 OD22×R3/4 GDC5367 OD22×R1 GDC5368 OD28×R3/4 GDC5369 OD28×R1 GDC5370 OD28×R1 1/4 GDC5371 OD35×R1 GDC5372 OD35×R1 1/4 GDC5373 OD35×R1 1/2 GDC5374 OD42×R1 1/4 GDC5375 OD42×R1 1/2 GDC5376 OD54×R1 1/2 GDC5377 OD54×R2 GDC6541 OD66.7×R2 1/2 GDC5378 OD76.1×R2 1/2 GDC5379 OD88.9×R3 GDC5380 OD108×R4 Adaptor with Female Thread End GDC5381 OD15×Rp1/2 GDC5382 OD15×Rp3/4 GDC5383 OD18×Rp1/2 GDC5384 OD18×Rp3/4 GDC5385 OD22×Rp1/2 GDC5386 OD22×Rp3/4 GDC5387 OD22×Rp1 GDC5388 OD28×Rp3/4 GDC5389 OD28×Rp1 GDC5390 OD28×Rp1 1/4 GDC5391 OD35×Rp1 GDC5392 OD35×Rp1 1/4 GDC5393 OD35×Rp1 1/2 GDC5394 OD42×Rp1 1/4 GDC5395 OD42×Rp1 1/2 GDC5396 OD54×Rp1 1/2 GDC5397 OD54×Rp2 GDC6542 OD66.7×Rp2 1/2 GDC5398 OD76.1×Rp2 1/2 GDC5399 OD88.9×Rp3 GDC5400 OD108×Rp4 Cap GDC5421 OD15 GDC5422 OD18 GDC5423 OD22 GDC5424 OD28 GDC5425 OD35 GDC5426 OD42 GDC5427 OD54 GDC6542 OD66.7 GDC5428 OD76.1 GDC5429 OD88.9 GDC5430 OD108 Adaptor with Union Nut GDC5341 OD15×G1/2 GDC5353 OD15×G3/4 GDC5342 OD18×G1/2 GDC5343 OD18×G3/4 GDC5345 OD22×G1 GDC5347 OD28×G1 GDC5348 OD28×G1 1/4 GDC5359 OD35×G1 1/4 GDC5350 OD35×G1 1/2 GDC5351 OD42×G1 3/4 GDC5346 OD42×G1 1/2 GDC5356 OD54×G2 GDC5352 OD54×G2 3/8 Adaptor with Union with Female thread GDC5451 OD15×Rp1/2 GDC5452 OD15×Rp3/4 GDC5453 OD18×Rp1/2 GDC5454 OD18×Rp3/4 GDC5455 OD22×Rp3/4 GDC5456 OD22×Rp1 GDC5457 OD28×Rp1 GDC5458 OD35×Rp1 1/4 GDC5459 OD42×Rp1 1/2 GDC5460 OD54×Rp2 Adaptor Union with Male Thread GDC5431 OD15×R1/2 GDC5432 OD15×R3/4 GDC5433 OD18×R1/2 GDC5434 OD18×R3/4 GDC5435 OD22×R1/2 GDC5436 OD22×R3/4 GDC5437 OD22×R1 GDC5438 OD28×R1 GDC5439 OD35×R1 1/4 GDC5440 OD42×R1 1/2 GDC5441 OD54×R2 Adaptor Union GDC5471 OD15 GDC5472 OD18 GDC5473 OD22 GDC5474 OD28 GDC5475 OD35 GDC5476 OD42 GDC5477 OD54 Flange with Pressing Socket GDC5301 OD15 GDC5302 OD18 GDC5303 OD22 GDC5304 OD28 GDC5305 OD35 GDC5306 OD42 GDC5307 OD54 GDC6536 OD66.7 GDC5308 OD76.1 GDC5309 OD88.9 GDC5310 OD108

Approval Holder:

Marla Tube Fittings Limited

Company Name

Marla Tube Fittings Limited

Address

Kinwarton Farm Road Alcester

Postcode

B49 6EH

Country

United Kingdom

Phone

01789 761207

General Email

graham.walker@marla.co.uk

View All Listings by this Company

Range of green Sappro butt-welded polypropylene fittings for use with Sappro PPR pipes. Maximum working pressure: 20 Bar. Maximum operating temperature: 23°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250802006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Sappro logo and size on body. Sappro logo, ISO 15874-2 and size on pipe body

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

Pipe: SFP6285205000015 20 mm SFP6285205000022 25 mm SFP6285205000039 32 mm SFP6285205000046 40 mm SFP6285205000053 50 mm SFP6285205000060 63 mm SFP6285205000077 75 mm SFP6285205000084 90 mm Elbow 90°: SFP6285205002613 20 mm SFP6285205002620 25 mm SFP6285205002637 32 mm SFP6285205002644 40 mm SFP6285205002651 50 mm SFP6285205002668 63 mm SFP6285205002675 75 mm SFP6285205002682 90 mm Elbow 45°: SFP6285205002798 20 mm SFP6285205002804 25 mm SFP6285205002811 32 mm SFP6285205003030 40 mm SFP6285205003047 50 mm SFP6285205003054 63 mm SFP6285205003061 75 mm SFP6285205003078 90 mm Equal Tee: SFP6285205003566 20 mm SFP6285205003573 25 mm SFP6285205003580 32 mm SFP6285205003597 40 mm SFP6285205003603 50 mm SFP6285205003610 63 mm SFP6285205003627 75 mm SFP6285205003634 90 mm Socket: SFP6285205003221 20 mm SFP6285205003238 25 mm SFP6285205003245 32 mm SFP6285205003252 40 mm SFP6285205003269 50 mm SFP6285205003276 63 mm SFP6285205003283 75 mm SFP6285205003290 90 mm Bridge Bend: SFP6285205001593 20mm SFP6285205001609 25mm SFP6285205001616 32mm Socket Bridge Bend: SFP6285205002033 25mm End Cap: SFP6285205003740 20mm SFP6285205003962 25mm SFP6285205003979 32mm SFP6285205003986 40mm SFP6285205003993 50mm SFP6285205004006 63mm SFP6285205004013 75mm SFP6285205004020 90mm Male Plug: SFP6285205004136 20mm Reducer Socket: SFP6285205007267 25mm x 20mm SFP6285205007281 32mm x 25mm SFP6285205007274 32mm x 20mm SFP6285205007304 40mm x 25mm SFP6285205007311 40mm x 32mm SFP6285205007313 50mm x 25mm SFP6285205007314 50mm x 32mm SFP6285205007315 50mm x 40mm SFP6285205007317 63mm x 25mm SFP6285205007318 63mm x 32mm SFP6285205007319 63mm x 40mm SFP6285205007320 63mm x 50mm Reducer: SFP6285205005331 75mm x 32mm SFP6285205005348 75mm x 40mm SFP6285205005355 75mm x 50mm SFP6285205005362 75mm x 63mm Reducer Tee: SFP6285205005911 25mm x 20mm SFP6285205006208 32mm x 25mm SFP6285205006222 40mm x 25mm SFP6285205006239 40mm x 32mm SFP6285205006604 50mm x 25mm SFP6285205006628 50mm x 32mm SFP6285205006642 63mm x 25mm SFP6285205006666 63mm x 32mm SFP6285205006673 63mm x 40mm SFP6285205006697 75mm x 32mm SFP6285205006703 75mm x 40mm SFP6285205006710 75mm x 50mm SFP6285205006727 75mm x 63mm Female Socket: SFP6285205007625 20mm x 1/2" BSP (F) SFP6285205007626 20mm x 3/4" BSP (F) SFP6285205007627 25mm x 1/2" BSP (F) SFP6285205007628 25mm x 3/4" BSP (F) SFP6285205007629 32mm x 1/2" BSP (F) SFP6285205007630 32mm x 3/4" BSP (F) SFP6285205007631 32mm x 1" BSP (F) Male Socket: SFP6285205007660 20mm x 1/2" BSP (M) SFP6285205007661 20mm x 3/4" BSP (M) SFP6285205007662 25mm x 1/2" BSP (M) SFP6285205007663 25mm x 3/4" BSP (M) SFP6285205007664 32mm x 1/2" BSP (M) SFP6285205007665 32mm x 3/4" BSP (M) Female Double Tee: SFP6285205007458 25mm x 1/2" BSP (F) Female Elbow: SFP6285205008039 20mm x 1/2" BSP (F) SFP6285205008041 25mm x 1/2" BSP (F) SFP6285205008042 25mm x 3/4" BSP (F) SFP6285205008043 32mm x 1/2" BSP (F) SFP6285205008044 32mm x 3/4" BSP (F) SFP6285205008045 32mm x 1" BSP (F) Male Elbow: SFP6285205008055 25mm x 1/2" BSP (M) SFP6285205008056 25mm x 3/4" BSP (M) SFP6285205008058 32mm x 1" BSP (M) Male Hexagon: SFP6285205008025 32mm x 1" BSP (M) SFP6285205008027 40mm x 1 1/4" BSP (M) SFP6285205008028 50mm x 1 1/2" BSP (M) SFP6285205008029 63mm x 2" BSP (M) SFP6285205008030 75mm x 2 1/2" BSP (M) SFP6285205008031 90mm x 3" BSP (M) Female Tee: SFP6285205007599 25mm x 1/2" BSP (F) SFP6285205007600 25mm x 3/4" BSP (F) SFP6285205007601 32mm x 1/2" BSP (F) SFP6285205007602 32mm x 3/4" BSP (F) SFP6285205007603 32mm x 1" BSP (F)

Approval Holder:

SAUDI FACTORY CO, FOR PLASTIC PRODUCTS

Company Name

SAUDI FACTORY CO, FOR PLASTIC PRODUCTS

Address

Albjadiya Industrial RIYADH

Country

Saudi Arabia

View All Listings by this Company

F1C compression & F5 press fittings for use with B1 multilayer PEX/AL/PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250406702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

12mm, 16mm, 20mm, 25mm, 26mm & 32mm.

Marking:

Fittings: Rifeng, Size, crimp profile (U), date of manufacture (yyyy/mm), on crimp sleeve. Pipes: Rifeng, PEXb/AL/PEXb, pressure, size, date of manufacture & batch no.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

B1 multilayer PEX/AL/PEX pipe, F1C compression fittings & F5 press fittings. Pipe: Multilayer PEX/AL/PEX Pipes B1-0912 Multilayer PEX/AL/PEX Pipes B1-1216 Multilayer PEX/AL/PEX Pipes B1-1620 Multilayer PEX/AL/PEX Pipes B1-2025 Multilayer PEX/AL/PEX Pipes B1-2026 Multilayer PEX/AL/PEX Pipes B1-2632 F5 Equal straight union: F5-S0912*0912 F5-S1216*1216 F5-S1620*1620 F5-S2025*2025 F5-S2026*2026 F5-S2632*2632 F5 Reducer: F5-S1216*0912 F5-S1620*0912 F5-S1620*1216 F5-S2025*0912 F5-S2025*1216 F5-S2025*1620 F5-S2026*0912 F5-S2026*1216 F5-S2026*1620 F5-S2632*0912 F5-S2632*1216 F5-S2632*1620 F5-S2632*2025 F5-S2632*2026 F5 Male straight union: F5-S0912*1/2 F5-S0912*3/4 F5-S1216*3/8 F5-S1216*1/4 F5-S1216*1/2 F5-S1216*3/4 F5-S1216*1 F5-S1620*3/8 F5-S1620*1/2 F5-S1620*3/4 F5-S1620*1 F5-S2025*1/2 F5-S2025*3/4 F5-S2025*1 F5-S2026*1/2 F5-S2026*3/4 F5-S2026*1 F5-S2632*1/2 F5-S2632*3/4 F5-S2632*1 F5-S2632*1 1/4 F5-S2632*1 1/2 F5 Female straight union: F5-S0912*1/2F F5-S0912*3/4F F5-S1216*3/8F F5-S1216*1/4F F5-S1216*1/2F F5-S1216*3/4F F5-S1216*1F F5-S1620*3/8F F5-S1620*1/2F F5-S1620*3/4F F5-S1620*1F F5-S2025*1/2F F5-S2025*3/4F F5-S2025*1F F5-S2026*1/2F F5-S2026*3/4F F5-S2026*1F F5-S2632*1/2F F5-S2632*3/4F F5-S2632*1F F5-S2632*1 1/4F F5-S2632*1 1/2F F5 Equal elbow: F5-L0912*0912 F5-L1216*1216 F5-L1620*1620 F5-L2025*2025 F5-L2026*2026 F5-L2632*2632 F5 Equal elbow (45°): F5-L0912*0912 (45°) F5-L1216*1216 (45°) F5-L1620*1620 (45°) F5-L2025*2025 (45°) F5-L2026*2026 (45°) F5-L2632*2632(45°) F5 Unequal elbow: F5-L1216*0912 F5-L1620*0912 F5-L1620*1216 F5-L2025*0912 F5-L2025*1216 F5-L2025*1620 F5-L2026*0912 F5-L2026*1216 F5-L2026*1620 F5-L2632*0912 F5-L2632*1216 F5-L2632*1620 F5-L2632*2025 F5-L2632*2026 F5 Male elbow: F5-L0912*1/2 F5-L0912*3/4 F5-L1216*3/8 F5-L1216*1/4 F5-L1216*1/2 F5-L1216*3/4 F5-L1216*1 F5-L1620*3/8 F5-L1620*1/2 F5-L1620*3/4 F5-L1620*1 F5-L2025*1/2 F5-L2025*3/4 F5-L2025*1 F5-L2026*1/2 F5-L2026*3/4 F5-L2026*1 F5-L2632*1/2 F5-L2632*3/4 F5-L2632*1 F5-L2632*1 1/4 F5-L2632*1 1/2 F5 Female elbow: F5-L0912*1/2F F5-L0912*3/4F F5-L1216*3/8F F5-L1216*1/4F F5-L1216*1/2F F5-L1216*3/4F F5-L1216*1F F5-L1620*3/8F F5-L1620*1/2F F5-L1620*3/4F F5-L1620*1F F5-L2025*1/2F F5-L2025*3/4F F5-L2025*1F F5-L2026*1/2F F5-L2026*3/4F F5-L2026*1F F5-L2632*1/2F F5-L2632*3/4F F5-L2632*1F F5-L2632*1 1/4F F5-L2632*1 1/2F F5 Equal tee: F5-T0912*0912*0912 F5-T1216*1216*1216 F5-T1620*1620*1620 F5-T2025*2025*2025 F5-T2026*2026*2026 F5-T2632*2632*2632 F5 Unequal tee: F5-T1216*1620*1216 F5-T1620*1216*1216 F5-T1620*1620*1216 F5-T1620*2025*1620 F5-T2025*1216*1216 F5-T2025*1216*1620 F5-T2025*1216*2025 F5-T2025*1620*1216 F5-T2025*1620*1620 F5-T2025*1620*2025 F5-T2025*2025*1216 F5-T2025*2025*1620 F5-T2025*2632*2025 F5-T2632*1216*2632 F5-T2632*1620*2632 F5-T2632*2025*2025 F5-T2632*2025*2632 F5-T0912*1216*0912 F5-T2632*2026*2632 F5-T1620*1216*1620 F5-T1216*2025*1216 F5 Male tee: F5-T0912*1/2*0912 F5-T0912*3/4*0912 F5-T1216*3/8*1216 F5-T1216*1/4*1216 F5-T1216*1/2*1216 F5-T1216*3/4*1216 F5-T1216*1*1216 F5-T1620*3/8*1620 F5-T1620*1/2*1620 F5-T1620*3/4*1620 F5-T1620*1*1620 F5-T2025*1/2*2025 F5-T2025*3/4*2025 F5-T2025*1*2025 F5-T2026*1/2*2026 F5-T2026*3/4*2026 F5-T2026*1*2026 F5-T2632*1/2*2632 F5-T2632*3/4*2632 F5-T2632*1*2632 F5-T2632*1 1/4*2632 F5-T2632*1 1/2*2632 F5 Female tee: F5-T0912*1/2F*0912 F5-T0912*3/4F*0912 F5-T1216*3/8F*1216 F5-T1216*1/4F*1216 F5-T1216*1/2F*1216 F5-T1216*3/4F*1216 F5-T1216*1F*1216 F5-T1620*3/8F*1620 F5-T1620*1/2F*1620 F5-T1620*3/4F*1620 F5-T1620*1F*1620 F5-T2025*1/2F*2025 F5-T2025*3/4F*2025 F5-T2025*1F*2025 F5-T2026*1/2F*2026 F5-T2026*3/4F*2026 F5-T2026*1F*2026 F5-T2632*1/2F*2632 F5-T2632*3/4F*2632 F5-T2632*1F*2632 F5-T2632*1 1/4F*2632 F5-T2632*1 1/2F*2632 F5 Demountable female straight union: F5-S0912*1/2F(H) F5-S0912*3/4F(H) F5-S1216*3/8F(H) F5-S1216*1/4F(H) F5-S1216*1/2F(H) F5-S1216*3/4F(H) F5-S1216*1F(H) F5-S1620*3/8F(H) F5-S1620*1/2F(H) F5-S1620*3/4F(H) F5-S1620*1F(H) F5-S2025*1/2F(H) F5-S2025*3/4F(H) F5-S2025*1F(H) F5-S2026*1/2F(H) F5-S2026*3/4F(H) F5-S2026*1F(H) F5-S2632*1/2F(H) F5-S2632*3/4F(H) F5-S2632*1F(H) F5-S2632*1 1/4F(H) F5-S2632*1 1/2F(H) F5 End cap: F5-D0912 F5-D1216 F5-D1620 F5-D2025 F5-D2026 F5-D2632 F1C End cap: F1-D0912 F1-D1216 F1-D1620 F1-D2025 F1-D2026 F1-D2632 F5 Connector core: F5-C1216x1/2 F5-C1620x1/2 F5-C1216x3/4 F5-C1620x3/4 F5-C2025x3/4 F5 Wall plated female elbow: F5-L1216x1/2F (Z) F5-L1620x1/2F (Z) F5-L1620x3/4F (Z) F5-L1216x1/2F (Z4) F5-L1620x1/2F (Z4) F5-L1620x3/4F (Z4) F1 MLCP to Copper Adaptor: F1-S1216x15Cu C (MUL) F1-S1620x15Cu C (MUL) F1-S1620x22Cu C (MUL) F1-S2025x22Cu C (MUL) F1-S2025x28Cu C (MUL) F1-S2632x28Cu C (MUL) F1-S1216x15Cu2 C F1-S1620x15Cu2 C F1-S2025x28Cu2 C F1-S2632x28Cu2 C F5 MLCP to Copper Adaptor: F5-S1216x15Cu (MUL) F5-S1620x15Cu (MUL) F5-S1620x22Cu (MUL) F5-S2025x22Cu (MUL) F5-S2025x28Cu (MUL) F5-S2632x28Cu (MUL) F5-S1216x15Cu (150) F5-S1620x22Cu (150) F5-S1216x15Cu2 F5-S1620x22Cu2 F5-S2025x22Cu2 F5-S2632x28Cu2 Radiator elbow copper adapter: F5-L1216xφ15S Assembly Double Fittings: F5-L1216xφ15S (Z1) (GZ1) Copper Radiator Tee: F5-T1216xφ15Sx1216

Product Images

Approval Holder:

Rifeng Enterprise (Foshan) Co., Ltd.

Company Name

Rifeng Enterprise (Foshan) Co., Ltd.

Address

F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province

Postcode

528318

Country

China

Phone

+86 757 8203 1672

General Email

lio-lu@rifeng.com

View All Listings by this Company

EG Range of copper, brass capillary lead free solder ring fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250708027

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Eagle brand logo on fitting.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

EG1 Straight Coupling 15mm， 22mm， 28mm， 35mm， 42mm， 54mm EG1M Metric/ Imperial Adaptor 15mm x 1/2"， 22mm x 3/4" EG1R Reducing coupling 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 22mm，35mm x 28mm，42mm x 28mm， 42mm x 35mm，54mm x 35mm，54mm x 42mm EG1S Slip Coupling 15mm， 22mm， 28mm EG2 Straight Female Connector 15mm x 1/2"，22mm x 1/2"，22mm x 3/4"，28mm x 1"，35mm x 1 1/4"，42mm x 1 1/2"，54mm x 2" EG3 Straight Male Connector 15mm x 1/2"，22mm x 3/4"，28mm x 1"，35mm x 1 1/4"，42mm x 1 1/2"，54mm x 2" EG6 Fitting Reducer 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 15mm，35mm x 22mm，35mm x 28mm， 42mm x 22mm，42mm x 28mm，42mm x 35mm， 54mm x 28mm，54mm x 35mm，54mm x 42mm EG12 90° Elbow 15mm, 22mm， 28mm， 35mm， 42mm， 54mm EG12S Street Elbow 15mm， 22mm， 28mm EG13 Male Elbow 15mm x 1/2"，22mm x 3/4" EG14 Female Elbow 15mm x 1/2"，22mm x 1/2"，22mm x 3/4" EG15 Wallplate Elbow 15mm x 1/2" EG21 45° Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm EG24 Equal Tee 15mm， 22mm， 28mm， 35mm， 42mm， 54mm EG25 Reduced Branch Tee 22mm x 22mm x 15mm， 28mm x 28mm x 15mm ， 28mm x 28mm x 22mm， 35mm x 35mm x 15mm ， 35mm x 35mm x 22mm， 35mm x 35mm x 28mm ， 42mm x 42mm x 15mm， 42mm x 42mm x 22mm ， 42mm x 42mm x 28mm， 42mm x 42mm x 35mm ， 54mm x 54mm x 15mm， 54mm x 54mm x 22mm ， 54mm x 54mm x 28mm， 54mm x 54mm x 35mm ， 54mm x 54mm x 42mm EG26 Reduced One End Tee 22mm x 15mm x 22mm， 28mm x 15mm x 28mm ， 28mm x 22mm x 28mm EG27 Reduced End & Branch Tee 22mm x 15mm x 15mm， 28mm x 22mm x 15mm ， 28mm x 22mm x 22mm EG28 Two Reduced End Tee 15mm x 15mm x 22mm，22mm x 22mm x 28mm EG30 Centre Female Tee 15mm x 15mm x 1/2"，22mm x 22mm x 1/2"，22mm x 22mm x 3/4" EG61 Stop End 15mm, 22mm， 28mm， 35mm， 42mm， 54mm

Approval Holder:

SCE Technology (Ningbo) Co., Ltd

Company Name

SCE Technology (Ningbo) Co., Ltd

Address

No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Zhejiang

Country

China

View All Listings by this Company

Range of compression fittings with brass, chrome plated brass bodies. For use with copper pipe (EN 1057) Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604034

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15MM– 54MM & 1/2” – 1”

Marking:

Lawton & size on compression nut.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Coupling Compression Chrome COMCP015CP – 15mm COMCP022CP – 22mm COMCP028CP – 28mm COMCP035CP – 35mm COMCP042CP – 42mm COMCP054CP – 54mm Coupling Compression SB-COMCP015 – 15mm SB-COMCP022 – 22mm SB-COMCP028 – 28mm SB-COMCP035 – 35mm SB-COMCP042 – 42mm SB-COMCP054 – 54mm 90 Degree Elbow Compression SB-COMEL015 – 15mm SB-COMEL022 – 22mm SB-COMEL028 – 28mm SB-COMEL035 – 35mm SB-COMEL042 – 42mm SB-COMEL054 – 54mm Equal Tee Compression SB-COMTE015 – 15mm SB-COMTE022 – 22mm SB-COMTE028 – 28mm SB-OMTE035 – 35mm SB-COMTE042 – 42mm SB-COMTE054 – 54mm Male Iron Coupling Compression SB-COMCPMI0153/8 – 15mm x 3/8” SB-COMCPMI0151/2 – 15mm x ½” SB-COMCPMI0221/2 – 22mm x ½” SB-COMCPMI0223/4 – 22mm x ¾” SB-COMCPMI0221 – 22mm x 1 “ SB-COMCPMI0281 – 28mm x 1” Female Iron Coupling Chrome Compression SB-COMCPFI0151/2CP – 15mm x ½” SB-COMCPFI0223/4CP – 22mm x ¾” End Cap Compression SB-COMEC015 – 15mm SB-COMEC022 – 22mm

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

View All Listings by this Company

Manufacturer:

The Lawton Tube Company Ltd.

Company Name

The Lawton Tube Company Ltd.

Address

Torrington Avenue, Tile Hill, Coventry

Postcode

CV4 9AB

Phone

+44 24 7646 6203 or 024 7646 6203

View All Listings by this Company

Range of compression fittings with brass, nickel plated brass bodies for use with copper pipe (manufactured to EN 1057). For above ground use only. Max working pressure 16.0 bar. Max operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

8mm – 54mm. ¼” - 1¼” BSP (M) or (F). Added June 2025: Additional 8 - 35mm sizes (see model). 42mm - 54mm. 1½” - 2” BSP (M) or (F).

Marking:

MT(Brand name) , Size, WRAS and EN 1254-2 on compression nut.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

Equal Straight: 6601012 - 12×12 6601015 - 15×15 6601018 - 18×18 6601022 - 22×22 6601028 - 28×28 6601035 - 35×35 6601042 - 42x42 6601054 - 54x54 6701008 8×8 6701010 - 10×10 6701012 - 12×12 6701014 - 14×14 6701015 - 15×15 6701016 - 16×16 6701018 - 18×18 6701022 - 22×22 6701028 - 28×28 6701035 - 35×35 6701042 - 42x42 6701054 - 54x54 Reducing Straight: 660101815 - 18×15 660102215 - 22×15 660102218 - 22×18 660102822 - 28×22 670101008 - 10×8 670101210 - 12×10 670101508 - 15×8 670101510- 15×10 670101512 - 15×12 670101815 - 18×15 670102215 - 22×15 670102822 - 28×22 Female Straight 660201215 - 12×1/2" F 660201510 - 15×3/8" F 660201515 - 15×1/2" F 660201520 - 15×3/4" F 660201525 - 15×1" F 660201815 - 18×1/2" F 660201820 - 18×3/4" F 660202215 - 22×1/2" F 660202220 - 22×3/4" F 660202215 - 22×1" F 660202820 - 28×3/4" F 660202825 - 28×1" F 670200810 - 8×3/8" F 670201010 - 10×3/8" F 670201015 - 10×1/2" F 670201210 - 12×3/8" F 670201215 - 12×1/2" F 670201415 - 14×1/2" F 670201510 - 15×3/8" F 670201515 - 15×1/2" F 670201520 - 15×3/4" F 670201525 - 15×1" F 670201615 - 16×1/2"F 670201620 - 16×3/4" F 670201815 - 18×1/2" F 670201820 - 18×3/4" F 670202215 - 22×1/2" F 670202220 - 22×3/4" F 670202225 - 22×1" F 670202820 - 28×3/4" F 670202825 - 28×1" F 670203532 - 35×1 1/4"F 670204240 - 42×1 1/2" F 670205450 - 54×2" F Male Straight: 670301510 - 15×3/8"M 670301515 - 15×1/2"M 670301520- 15×3/4"M 670301815 - 18×1/2"M 670301820 - 18×3/4"M 670302215 - 22×1/2"M 670302220 - 22×3/4"M 670302225- 22×1"M 660302820 - 28×3/4"M 660302825 - 28×1"M 670300806F - 8×1/8"M 670301210F - 12×3/8"M 670301215F - 12×1/2"M 670301410F - 14×3/8"M 670301415F - 14×1/2"M 670301515 - 15×1/2"M 670301520F - 15×3/4"M 670301615F - 16×1/2"M 670301815F - 18×1/2"M 670301820F - 18×3/4"M 670302215 - 22×1/2"M 670302220 - 22×3/4"M 670302820F - 28×3/4"M 670302825 - 28×1"M 670303532F - 35×1 1/4"M 670304240F - 42×1 1/2"M Equal Elbow: 6604015 - 15×15 6604018 - 18×18 6604022 - 22×22 6604028 - 28×28 6604035 - 35×35 6604042 - 42×1 1/2"M 6604054 - 54 x 54 6704008 - 8×8 6704010 - 10×10 6704012 - 12×12 6704014 - 14×14 6704015 - 15×15 6704016 - 16×16 6704018 - 18×18 6704022 - 22×22 6704028 - 28×28 6704035 - 35×35 6704042 - 42x42 6704054 - 54x54 Female Elbow: 670501215 - 12×1/2"F 670501515 - 15×1/2"F 670501520 - 15×3/4"F 670501815 - 18×1/2"F 670501820 - 18×3/4"F 670502215 - 22×1/2"F 670502220 - 22×3/4"F 670582225 - 22×1"F 670502825 - 28×1"F 660501515 - 15×1/2"F 660501520 - 15×3/4"F 660501815 - 18×1/2"F 660501820 - 18×3/4"F 660502215- 22×1/2"F 660502220 - 22×3/4"F 660502225 - 22×1"F 660502825 - 28×1"F Male Elbow: 660601515 - 15×1/2"M 660601520 - 15×3/4"M 660601815 - 18×1/2"M 660601820 - 18×3/4"M 660602215 - 22×1/2"M 660602220 - 22×3/4"M 660602225 - 22×1"M 660602825 - 28×1"M 670601215 - 12×1/2"M 670601415- 14×1/2"M 670601515 - 15×1/2"M 670601520 - 15×3/4"M 670601615 - 16×1/2"M 670601815 - 18×1/2"M 670601820 - 18×3/4"M 670602215 - 22×1/2"M 670602220 - 22×3/4"M 670602225 - 22×1"M 670602825 - 28×1"M Equal Tee: 6608015 - 15×15×15 6608018 - 18×18×18 6608022 - 22×22×22 6608028 - 28×28×28 6608035- 35×35×35 6608042 - 42×42×42 6608054 - 54×54×54 6708010 - 10×10×10 6708012 - 12×12×12 6708014 - 14×14×14 6708015 - 15×15×15 6708016 - 16×16×16 6708018 - 18×18×18 6708022 - 22×22×22 6708028 - 28×28×28 6708035 - 35×35×35 Reducing Tee: 66090152215 - 15×15×22 66090181518 - 18×18×15 66090181815 - 18×15×18 66090221515 - 22×15×15 66090222215- 22×15×22 66090221522 - 22×22×15 66090221822 - 22×22×18 66090282815 - 28×15×28 66090282222 - 28×22×22 66090282822 - 28×22×28 67090152215 -15×15×22 67090181518 - 18×18×15 67090181815 - 18×15×18 67090221515 - 22×15×15 67090222215 - 22×15×22 67090221522 - 22×22×15 67090282815 - 28×15×28 67090282222 - 28×22×22 67090282822 - 28×22×28 Female Tee: 66100151515 - 15×1/2“F 66100181518 - 18×1/2“F 66100182018 - 18×3/4“F 66100221522 - 22×1/2”F 66100222022 - 22×3/4”F 66100282028 - 28×3/4”F 66100282528- 28×1”F 67100151515- 15×1/2“F 67100181518 - 18×1/2“F 67100182018 - 18×3/4“F 67100221522 - 22×1/2”F 67100222022 - 22×3/4”F Wall Plate Elbow: 661101515 - 15×1/2"F 661101815 - 18×1/2"F 661101820 - 18×3/4"F 661102215 - 22×1/2"F 661102220 - 22×3/4"F 671101515 - 15×1/2"F 671102215 - 22×1/2"F 671102220 - 22×3/4"F Stop End: 6607015 - 15 6607018 - 18 6607022 - 22 670708 - 8 6707010 - 10 6707012 - 12 6707015 - 15 6707018 - 18 6707022 - 22 6707028 - 28 Bent Tap Connector: 671301515 - 15×1/2"F 671302220 - 22×3/4"F Crossover Bridge: 6612015 - 15×15 6612018 - 18×18 6612022 - 22×22 6712015 - 15×15 6712022 - 22×22 Where for all models: No suffix = brass body, NP suffix = nickel plated brass,

Product Images

Approval Holder:

Business Key, S.L.

Company Name

Business Key, S.L.

Address

Poligono Industrial Camps d’En Ricart Carrer Comerç, 10 naves 4-9 08780 Pallejà (Barcelona)

Country

Spain

View All Listings by this Company

‘BF’ range of Brass compression fittings for use with copper pipe manufactured to EN1057 Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250602019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

IDC logo (E) and Size on body. EN 1254-2 and Size on Nut

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

BF range comprising of models: BF34821 ¾” Compression x ½” Compression BF34831 1” Compression x 1/2" Compression BF34832 1” Compression x ¾” Compression BF3101 ½” Compression BF3102 ¾” Compression BF3103 1” Compression BF31021 ¾” Compression x ½” Compression BF31032 1” Compression x 1/2" Compression BF31031 1” Compression x ¾” Compression BF3111 ½” BSP (M) x ½” Compression BF31112 ½” BSP (M) x ¾” Compression BF3112 ¾” BSP (M) x ¾” Compression BF31121 ¾” BSP (M) x ½” Compression BF31123 ¾” BSP (M) x 1” Compression BF3113 1” BSP (M) x 1” Compression BF31132 1” BSP (M) x ¾” Compression BF3121 ½” BSP (F) x ½” Compression BF31212 ½” BSP (F) x ¾” Compression BF3122 ¾” BSP (F) x ¾” Compression BF31221 ¾” BSP (F) x ½” Compression BF31223 ¾” BSP (F) x 1” Compression BF3123 1” BSP (F) x 1” Compression BF31232 1” BSP (F) x ¾” Compression BF3141 ½” Compression x 1/2"swivel F BF3271 ½” Compression x 1/2"swivel F BF3151 ½” Compression BF3152 ¾” Compression BF3153 1” Compression BF31521 ¾” Compression x 1/2" Compression BF31532 1" Compression x ¾” Compression BF3161 ½” BSP (M) x ½” Compression BF31612 ½” BSP (M) x ¾” Compression BF3162 ¾” BSP (M) x ¾” Compression BF31621 ¾” BSP (M) x ½” Compression BF31623 ¾” BSP (M) x 1” Compression BF3163 1” BSP (M) x 1” Compression BF31632 1” BSP (M) x ¾” Compression BF3171 ½” BSP (M) x ½” Compression BF31712 ½” BSP (M) x ¾” Compression BF3172 ¾” BSP (M) x ¾” Compression BF31721 ¾” BSP (M) x ½” Compression BF31723 ¾” BSP (M) x 1” Compression BF3173 1” BSP (M) x 1” Compression BF31732 1” BSP (M) x ¾” Compression BF3181 1/2" Compression BF3182 ¾” Compression BF3183 1" Compression BF320222 ¾” BSP (M) x ¾” Compression x ¾” Compression BF320333 1” BSP (M) x 1” Compression x 1” Compression BF318112 1/2" Compression x 1/2" Compression x ¾” Compression BF318211 ¾” Compression x 1/2" Compression x 1/2" Compression BF318212 ¾” Compression x 1/2" Compression x ¾” Compression BF318221 ¾” Compression x ¾” Compression x 1/2" Compression BF318223 ¾” Compression x ¾” Compression x 1" Compression BF318311 1" Compression x 1/2" Compression x 1/2" Compression BF318313 1" Compression x ½” Compression x 1" Compression BF318322 1" Compression x ¾” Compression x ¾” Compression BF318323 1" Compression x ¾” Compression x 1" Compression BF318331 1" Compression x 1" Compression x 1/2" Compression BF318332 1" Compression x 1" Compression x ¾” Compression BF3301 ½” Compression x ½” Compression x ½” BSP (F) BF3302 ¾” Compression x ¾” Compression x ¾” BSP (F) BF330221 ¾” Compression x ¾” Compression x ½” BSP (F) BF3303 1” Compression x 1” Compression x 1” BSP (F) BF330331 1” Compression x 1” Compression x ½” BSP (F) BF330332 1” Compression x 1” Compression x ¾” BSP (F) BF3402 ¾” BSP (M) x F COMPRESSION BF3403 1” BSP (M) x F COMPRESSION BF3211 ½” Compression x ½” BSP (F) BF3212 ¾” Compression x ¾” BSP (F) BF 32112 ¾” Compression x ½” BSP (F) BF3501 ½” Compression BF3502 ¾” Compression BF3503 1” Compression BF3511 ½” Compression BF3512 ¾” Compression BF3513 1" Compression

Product Images

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

‘BF’ range of Brass compression fittings for use with copper pipe manufactured to EN1057 Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250602051

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

South Coast Sales logo on body. EN 1254 and Size on compression Nut.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

BF range comprising of models: BF34821 ¾” Compression x ½” Compression BF34831 1” Compression x 1/2" Compression BF34832 1” Compression x ¾” Compression BF3101 ½” Compression BF3102 ¾” Compression BF3103 1” Compression BF31021 ¾” Compression x ½” Compression BF31032 1” Compression x 1/2" Compression BF31031 1” Compression x ¾” Compression BF3111 ½” BSP (M) x ½” Compression BF31112 ½” BSP (M) x ¾” Compression BF3112 ¾” BSP (M) x ¾” Compression BF31121 ¾” BSP (M) x ½” Compression BF31123 ¾” BSP (M) x 1” Compression BF3113 1” BSP (M) x 1” Compression BF31132 1” BSP (M) x ¾” Compression BF3121 ½” BSP (F) x ½” Compression BF31212 ½” BSP (F) x ¾” Compression BF3122 ¾” BSP (F) x ¾” Compression BF31221 ¾” BSP (F) x ½” Compression BF31223 ¾” BSP (F) x 1” Compression BF3123 1” BSP (F) x 1” Compression BF31232 1” BSP (F) x ¾” Compression BF3141 ½” Compression x 1/2"swivel F BF3271 ½” Compression x 1/2"swivel F BF3151 ½” Compression BF3152 ¾” Compression BF3153 1” Compression BF31521 ¾” Compression x 1/2" Compression BF31532 1" Compression x ¾” Compression BF3161 ½” BSP (M) x ½” Compression BF31612 ½” BSP (M) x ¾” Compression BF3162 ¾” BSP (M) x ¾” Compression BF31621 ¾” BSP (M) x ½” Compression BF31623 ¾” BSP (M) x 1” Compression BF3163 1” BSP (M) x 1” Compression BF31632 1” BSP (M) x ¾” Compression BF3171 ½” BSP (M) x ½” Compression BF31712 ½” BSP (M) x ¾” Compression BF3172 ¾” BSP (M) x ¾” Compression BF31721 ¾” BSP (M) x ½” Compression BF31723 ¾” BSP (M) x 1” Compression BF3173 1” BSP (M) x 1” Compression BF31732 1” BSP (M) x ¾” Compression BF3181 1/2" Compression BF3182 ¾” Compression BF3183 1" Compression BF320222 ¾” BSP (M) x ¾” Compression x ¾” Compression BF320333 1” BSP (M) x 1” Compression x 1” Compression BF318112 1/2" Compression x 1/2" Compression x ¾” Compression BF318211 ¾” Compression x 1/2" Compression x 1/2" Compression BF318212 ¾” Compression x 1/2" Compression x ¾” Compression BF318221 ¾” Compression x ¾” Compression x 1/2" Compression BF318223 ¾” Compression x ¾” Compression x 1" Compression BF318311 1" Compression x 1/2" Compression x 1/2" Compression BF318313 1" Compression x ½” Compression x 1" Compression BF318322 1" Compression x ¾” Compression x ¾” Compression BF318323 1" Compression x ¾” Compression x 1" Compression BF318331 1" Compression x 1" Compression x 1/2" Compression BF318332 1" Compression x 1" Compression x ¾” Compression BF3301 ½” Compression x ½” Compression x ½” BSP (F) BF3302 ¾” Compression x ¾” Compression x ¾” BSP (F) BF330221 ¾” Compression x ¾” Compression x ½” BSP (F) BF3303 1” Compression x 1” Compression x 1” BSP (F) BF330331 1” Compression x 1” Compression x ½” BSP (F) BF330332 1” Compression x 1” Compression x ¾” BSP (F) BF3402 ¾” BSP (M) x F COMPRESSION BF3403 1” BSP (M) x F COMPRESSION BF3211 ½” Compression x ½” BSP (F) BF3212 ¾” Compression x ¾” BSP (F) BF 32112 ¾” Compression x ½” BSP (F) BF3501 ½” Compression BF3502 ¾” Compression BF3503 1” Compression BF3511 ½” Compression BF3512 ¾” Compression BF3513 1" Compression

Product Images

Approval Holder:

South Coast Sales

Company Name

South Coast Sales

Address

1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.

Postcode

T12 TR62

Country

Ireland

Phone

00353 21 - 43 46 143

General Email

info@southcoastsales.com

View All Listings by this Company

Range of Victaulic rigid couplings (905, H10, H11, H20, H50) for use with plain end HDPE pipe (EN 12201-2), and for product 907, for use with EN 12201-2 HDPE and EN 10217-1 steel pipe. For above and below ground use. Maximum working pressure: SDR7.4 25bar, SDR11 16bar or SDR17 10bar. Maximum operating temperature: Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250702013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For H10, H11, H20 and H50, sizes 75, 140, 225mm not available in SDR7.4.

Size:

See Models below.

Marking:

Victaulic and size on fitting.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

905 Style 905 Coupling 63mm – 315mm Rigid Coupling, 907 Style 907 Transition Coupling 63mm x DN50 - 280mm x DN250 Rigid Coupling H10, HDPE 90° Elbow 63mm – 225mm Rigid Coupling, H11, HDPE 45° Elbow 63mm – 225mm Rigid Coupling, H20, HDPE Straight Tee 63mm – 225mm Rigid Coupling, H50, HDPE Concentric Reducer 90mm x 63mm – 160mm x 110 mm Rigid Coupling.

Product Images

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

Country

Belgium

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

"PRESSTITE" range of press fittings with nickel plated brass bodies incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved by a TH crimping profile. For above ground use only. Maximum working pressure 10.0 bar. 20 & 26mm pressfit sizes cold water use only. Threaded and pressfit 16mm size maximum operating temperature 95°C. From June 2025: The 20 & 26mm pressfit sizes maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404724

Size:

Pressfit: 16, 20 & 26mm. Threaded: ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Straight PEX x PEX (press x press): 900310002 - 16mm x 16mm 900310003 - 20mm x 20mm 900310004 - 26mm x 26mm Reduce Straight PEX x PEX (press x press): 900310032 - 20mm x 16mm 900310042 - 26mm x 16mm 900310043 - 26mm x 20mm Straight PEX x Female (press x female): 900312003 - 20mm x 1/2"F 900312004 - 26mm x 3/4"F 900312023 - 16mm x 1/2"F 900312034 - 20mm x 3/4"F 900312045 - 26mm x 1"F Stop end (press): 900372002 - 16mm 900372003 - 20mm 900372004 - 26mm Elbow (press): 900315002 - 16mm 900315003 - 20mm 900315004 - 26mm Elbow PEX x Male (press x male): 900316023 - 16mm x 1/2"M 900316003 - 20mm x 1/2"M 900316034 - 20mm x 3/4"M 900316004 - 26mm x 3/4"M Elbow PEX x Female (press x female): 900317023 - 16mm x 1/2"F 900317003 - 20mm x 1/2"F 900317034 - 20mm x 3/4"F 900317004 - 26mm x 3/4"F Wall Plate PEX x Female (press x female): 900307023 - 16 x 1/2"F 900307003 - 20 x 1/2"F 900307034 - 20 x 3/4"F 900307004 - 26 x 3/4"F Equal Tee (press): 900318002 - 16mm 900318003 - 20mm 900318004 - 26mm Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): 900318232 - 16 x 20 x 16 900318322 - 20 x 16 x 16 900318323 - 20 x 16 x 20 900318332 - 20 x 20 x 16 900318343 - 20 x 26 x 20 900318422 - 26 x 16 x 16 900318423 - 26 x 16 x 20 900318424 - 26 x 16 x 26 900318432 - 26 x 20 x 16 900318433 - 26 x 20 x 20 900318434 - 26 x 20 x 26 900318442 - 26 x 26 x 16 900318443 - 26 x 26 x 20 900318454 - 26 x 32 x 26 Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): 900330004 - 26 x 3/4"F x 20 900330023 - 16 x 1/2"F x 16 900330033 - 20 x 1/2"F x 20 900330034 - 20 x 3/4"F x 20 900330043 - 26 x 1/2"F x 26

Approval Holder:

Hevac Ltd

Company Name

Hevac Ltd

Address

Muirfield Drive Naas Road Dublin 12

Postcode

D12 X0A3

Country

Ireland

Phone

0035 314 191924

General Email

dave.grenville@hevac.ie

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company