Combined temperature and pressure relief valves pre-set at 7.0 bar with a DZR brass body. Maximum operating temperature 90°C.

Section:

2030 Valves

Section Subtitle:

Combined thermal and pressure relief.

WRAS Approval Number:

240904716

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Intatec logo & CR on valve body. Product info on cap.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

TP121507 Model added January 2025 TP121007B

Product Images

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Range of two-way manual diverter valves with shut-off position. Products are for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

2050 Diverter

Section Subtitle:

Diverter cartridge(s) with manual adjustment.

WRAS Approval Number:

241002020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

26mm O.D.

Marking:

HG on body

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

30079500 & 30650210

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of concealed and exposed two-way diverters, (brass bodies – various finishes, trim sets and operating members). The inlets on XX1650YY and XX1721YY models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C (PSA019 YY, PSA020 YY & XX1782YY) Maximum operating temperature 60°C (PSH049, XX1650YY, RZ/1721 & XX1721YY).

Section:

2050 Diverter

Section Subtitle:

Diverter cartridge(s) with manual adjustment.

WRAS Approval Number:

250202002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Compression models are for use with copper pipe (manufactured to BS EN 1057)

Size:

½” BSP (M) (XX1650YYY & XX1721YYY) 19mm compression fitting (XX1782YY)

Marking:

Lefroy Brooks logo on body (XX1782YY) or operating member (XX1650YY & XX1721YY)

Installation Requirements:

R001 R010 R040

Expiry date:

28/02/2030

Model:

Exposed PSA019YY PSA020YY Concealed XX1782YY XX1650YY XX1721YY Rough insets only: PSH049 RZ/1721 Where XX denotes the type of trim/operating members and can be replaced with any of the following, as examples: LB (Classic cross handle) LS (Classic star handle) BL (Classic lever black ceramic) WL (Classic lever white ceramic) CH (Connaught cross handle) CR (Black crystal lever) FH (La Chapelle cross handle) FM (La Chapelle lever metal) FB (La Chapelle lever black ceramic) FW (La Chapelle lever white ceramic) MH (Mackintosh cross handle) ML (Mackintosh lever) MB (Mackintosh black lever) TH (Ten Ten handwheel) TL (Ten Ten lever) Where YY denotes the colour/plating options and can be replaced with any of the following as examples: CP = Polished Chrome NK = Polished Nickel BC = Brushed Chrome BN = Brushed Nickel PB = Polished Brass BPB = Brushed Brass AB = Aged Brass TA = Taunton AG = Antique Gold HRG = Hard Rubbed Gold CM = Champagne Gold BCM = Brushed Champagne Gold CO = Copper MBC = Matt Black Chrome

Approval Holder:

Lefroy Brooks

Company Name

Lefroy Brooks

Address

Unit 3 Marston Industrial Estate Marston Road Wolverhampton

Postcode

WV2 4LX

Country

United Kingdom

Phone

01902 390 891

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of wall mounted flow control valves (brass bodies – various finishes) incorporating quarter turn ceramic disc headwork. The valves are supplied with multiple trim sets and operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

2170 Valves

Section Subtitle:

Flow control, manually operated.

WRAS Approval Number:

241004006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Please see models for operating member supplied.

Size:

½” BSP (M)

Marking:

The Watermark Collection Logo on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

AIC53-XX Anika Crosshead Wall Mounted Valve Supplied with a “three spoke” Handle AIL53-XX Anika Lever Wall Mounted Valve Supplied with a “tapered lever” Handle BRO54-XX Brooklyn Wall Mounted Valve Supplied with a "wheel shaped" Handle ELV50-XX Elan Vital Wall Mounted Valve Supplied with a "plumbing style lever" Handle ELM54-XX Elements Wall Mounted Valve Supplied with a "circular flat" Handle HIC55-XX Highline Crosshead Wall Mounted Valve Supplied with a "crosshead" Handle HIL55-XX Highline Lever Wall Mounted Valve Supplied with a "lever" Handle LOF49-XX Loft Wall Mounted Valve Supplied with a "tubular lever" Handle LOC53-XX London Crosshead Wall Mounted Valve Supplied with a "crosshead and barrel style" Handle LOL53-XX London Lever Wall Mounted Valve Supplied with a "lever and barrel style" Handle SEC53-XX Sense Crosshead Wall Mounted Valve Supplied with a "hammered base crosshead" Handle SED53-XX Sense Dial Wall Mounted Valve Supplied with a "hammered base dial" Handle SEL53-XX Sense Lever Wall Mounted Valve Supplied with a "hammered base lever" Handle TIN53-XX Titanium Wall Mounted Valve Supplied with a "knurled body" Handle URA54-XX Urbane Astor Wall Mounted Valve Supplied with a "knurled lever" Handle URC54-XX Urbane Cooper Wall Mounted Valve Supplied with a "knurled crosshead" Handle ZEC53-XX Zen Bianco Carrara Wall Mounted Valve Supplied with a "bianco carrara marble" Handle ZEF53-XX Zen Finished Metal Wall Mounted Valve Supplied with a "tapering circular metal" Handle ZEH53-XX Zen Honey Onyx Wall Mounted Valve Supplied with a "honey onyx" Handle ZEI53-XX Zen Ice White Wall Mounted Valve Supplied with a "ice white onyx" Handle ZEM53-XX Zen Nero Marqunia Wall Mounted Valve Supplied with a "nero marquina" Handle XX Denotes the finish codes as below: Aged Brass, AB Aged Nickel, AN Heritage Brass, HB Charcoal, CH Custom Gloss Lacquer, GL Custom Matt Lacquer, MT Black Mirror, BM Polished Brass, PB Green Patina, GP Gun Metal, GM Matt Black, MB Oil Rubbed Bronze, OR Pewter, PT Polished Gold, PG Polished Chrome, PC Polished Copper, CO Natural Brass, NB Polished Nickel, PN Rustica Brass, RB Brushed Gold, BG Brushed Brass, BB Brushed Nickel, BN Tarnished Brass, TB Vintage Brass, VB Vintage Copper, VC Satin Brass, SB Luxe Brass, LB

Product Images

Approval Holder:

The Watermark Collection

Company Name

The Watermark Collection

Address

16a Tower Workshops 58 Riley Road London

Country

SE1 3DG

View All Listings by this Company

Range of in-line, manually adjustable pressure reducing valves with nickel plated DZR brass body. Maximum inlet supply pressure 25 bar. Maximum operating temperature 80°C

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

240904705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

“OR” logo, DN, DR, PN and flow arrow on body

Installation Requirements:

R001 R120

Expiry date:

30/09/2029

Model:

Art.233.981 PRV “PN 25– CR (DZR) 1.0 to 5.5 bar G ½“, Art.233.982 PRV “PN 25– CR (DZR) 1.0 to 5.5 bar G ¾“, Art.233.983 PRV “PN 25– CR (DZR) 1.0 to 5.5 bar G 1”, Art.233.984 PRV “PN 25– CR (DZR) 1.5 to 5.5 bar G 1 ¼“, Art.233.987 PRV “PN 25– CR (DZR) 1.5 to 5.5 bar G 1 ½“, Art.233.988 PRV “PN 25– CR (DZR) 1.5 to 5.5 bar G 2”, Art.233.989 PRV “PN 25– CR (DZR) 1.5 to 5.5 bar G 2 ½“, Art.233.990 PRV “PN 25– CR (DZR) 1.5 to 5.5 bar light. G 3”, Art.233.991 PRV “PN 25– CR (DZR) 1.5 to 5.5 bar G 3”, Art.233.992 PRV “PN 25– CR (DZR) 1.5 to 5.5 bar G 4”.

Product Images

Approval Holder:

Officine Rigamonti Spa

Company Name

Officine Rigamonti Spa

Address

Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)

Country

Italy

Phone

+39 0163 48 165 Fax: +39 0163347254

General Email

info@officinerigamonti.it

View All Listings by this Company