Directory Search Results

Fittings Materials
Print List

#2101048

A range of combined bath filler and overflow with a plastic body with a variety of different trims. The products are supplied with a cable operated pop-up waste. For open outlet use only. Maximum operating temperature 65°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2101048
Size:
¾” BSP male
Marking:
Viega on waste operating member
Installation Requirements:
R001 R576
Expiry date:
31/01/2026
Model:
Multiplex Trio MT 5 97362KA, 97364KA, 97363KA, 97368KA and 97639DO
Product Images
Approval Holder:
Viega GmbH & Co KG
Company Name
Viega GmbH & Co KG
Address
Viega Platz 1, D-57439 Attendorn
Country
Germany

View All Listings by this Company

Print This Approval

#2012065

Range of chemical dosing equipment which incorporate self-closing valves with a plastic body. The outlet of the injector incorporates a connection for injection of chemicals via venturi action. Maximum working pressure 9.0 bar. Maximum operating temperature – 60ºC

Section:
0970 Dosing Equipment
Section Subtitle:
Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed
WRAS Approval Number:
2012065
Note:
Only suitable for use with chemicals no greater than a FC3, additional backflow protection is required for chemicals greater than FC3. Must be installed in the vertical plane.
Size:
¾” BSP male inlet
Marking:
SEKO, max pressure, max temperature and other technical info on label on housing.
Installation Requirements:
R001 R160
Expiry date:
31/12/2025
Model:
PXB1F04 PROMAX BUTTON FLEX-GAP 4L/MINPRODUCT PXB1F16 PROMAX BUTTON FLEX-GAP 14L/MINPRODUCT PXB1F30 PROMAX BUTTON FLEX-GAP 30L/MINPRODUCT PXB4F04 PROMAX BUTTON FLEX-GAP 4L/MINPRODUCT PXB4F16 PROMAX BUTTON FLEX-GAP 14L/MINPRODUCT PXB4F30 PROMAX BUTTON FLEX-GAP 30L/MINPRODUCT PXS1F04 PROMAX SLIDE FLEX-GAP 4L/MINPRODUCT PXS1F16 PROMAX SLIDE FLEX-GAP 14L/MINPRODUCT PXS1F30 PROMAX SLIDE FLEX-GAP 30L/MINPRODUCT PXS4F04 PROMAX SLIDE FLEX-GAP 4L/MINPRODUCT PXS4F16 PROMAX SLIDE FLEX-GAP 14L/MINPRODUCT PXS4F30 PROMAX SLIDE FLEX-GAP 30L/MINPRODUCT
Product Images
Approval Holder:
SEKO SpA
Company Name
SEKO SpA
Address
Via Salaria KM 92, 200 02010 S.Sufina (RI) Italy

View All Listings by this Company

Print This Approval

#2012034

Range of water filter systems with optional distributor heads. The inlets incorporate a non-return valve. Maximum working pressure 6.9 bar. Cold water use only.

Section:
1050 Filters and Housings
Size:
¾” BSP male inlet and outlet
Marking:
BRITA, WRAS and technical information on adhesive label on body.
Installation Requirements:
R001 R120 R150 R170
Expiry date:
31/12/2025
Model:
Professional water filter system (B2B) "Purity Steam":- Purity 450 Steam including cartridge assembly Purity 450 and lid assembly MDU 450 or optional lid assembly DH 450. Purity 600 Steam including cartridge assembly Purity 600 Steam and lid assembly MDU 600 or optional lid assembly DH 600. Purity 1200 Steam including cartridge assembly 1200 and lid assembly MDU 1200 or optional lid assembly DH 1200 The models are available with two different distributor heads (MDU and DH), the MDU (measurement display unit) has an electronic display to show the filtered volume, the DH (distributor head) has no electronic display.
Product Images
Approval Holder:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Country
Germany
Phone
+49 6128 746 0
General Email
info@brita.net

View All Listings by this Company
Manufacturer:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Country
Germany
Phone
+49 6128 746 0
General Email
info@brita.net

View All Listings by this Company

Print This Approval

#2012361

Range of complete water filter heads and compatible filter cartirdges with plastic bodies and EPDM ‘O’-rings. The FX filters are carbon block based and the VH-IEN filters use an ion exchange resin. Maximum working pressure 8.6 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2012361
Note:
Please note that the product is marked with ‘38°C’ which the manufacturer states is the ambient air temperature and not water temperature. The WRAS Approval is for cold water use only.
Size:
10mm push fit (to filter head).
Marking:
Microfilter logo and technical information on adhesive label on body.
Installation Requirements:
R001 R008 R120 R150 R170
Expiry date:
31/12/2025
Model:
FX10, FX15 & FX17. VH-IEN 1500, VH-IEN 3000, VH-IEN 6000 & VH-IEN 9000
Product Images
Approval Holder:
Microfilter Co., Ltd
Company Name
Microfilter Co., Ltd
Address
162-1 SANSU-RI DEOKSAN-MYEON JINCHEONKUN CHUNGBUK 365-842
Phone
+82-43-531-7024

View All Listings by this Company
Manufacturer:
Microfilter Co., Ltd
Company Name
Microfilter Co., Ltd
Address
162-1 SANSU-RI DEOKSAN-MYEON JINCHEONKUN CHUNGBUK 365-842
Phone
+82-43-531-7024

View All Listings by this Company

Print This Approval

#2012356

‘Maincor’ range of pipe adaptors and ‘Multi-Fit’ straight connectors (brass bodies) for use with ‘Maincor PERT/Al/PERT MLC’ pipe. 12mm pipe and fittings have a maximum working pressure of 6.0 bar. 16mm & 20mm pipe and fittings have a maximum working pressure of 10.0 bar Maximum operating temperature 95°C

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2012356
Size:
Pipe adaptors: 12mm x ½”, 12mm x ¾”, 16mm x ¾”, 20mm x ¾”. Straight connectors: 16mm x ½”, 16mm x ¾”, 20mm x ½” 20mm x ¾” MLC Pipe: 12mm x 1.6mm, 16mm x 2mm, 20mm x 2.25mm
Marking:
Maincor and technical information on pipe. Maincor and pipe size on nut of pipe adaptors. ‘Itap’, Multi-Fit on body straight connectors.
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
‘Maincor’ range of pipe adaptors and ‘Multi-Fit’ straight connectors (brass bodies) for use with ‘Maincor PERT/Al/PERT MLC’ pipe
Product Images
Approval Holder:
Maincor
Company Name
Maincor
Address
Leciester Road, Lutterworth, Leicestershire
Postcode
LE17 4NJ
Phone
+44 (0) 1455 555930
General Email
enquiries@maincor.co.uk

View All Listings by this Company
Manufacturer:
Maincor Rohrsysteme GmbH & Co KG
Company Name
Maincor Rohrsysteme GmbH & Co KG
Address
Silbersteinstraße 14 D - 97424 Schweinfurt Germany
Phone
+49 97 21 / 65977 – 100
General Email
info@maincor.de

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 63 of 815

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.