Range of wall mounted hose union taps (brass body or DZR brass body - see model) incorporating a non-rising spindle headwork with a ‘T’-type operating member. The 1BCB001 & 1BCB701 models incorporate two approved single check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 14.0 Bar. Maximum operating temperature 85°C.

Section:

1780 Taps

Section Subtitle:

Hose union tap(s).

WRAS Approval Number:

2201061

Size:

½” BSP (M).

Marking:

1BCA001: BS1010-2, IDC ‘E’ Logo and size on body. 1BCB001: BS1010, BS6282, IDC ‘E’ logo, CR and size on body. 1BCB701: BS1010, BS6282, IDC ‘E’ logo and size on body.

Installation Requirements:

R001 R040

Expiry date:

31/01/2027

Model:

Brass body: 1BCA001, 1BCB701. DZR brass body: 1BCB001.

Product Images

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Ltd

Company Name

IDC Plumbing & Heating Technology (Beijing) Ltd

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co., Ltd.

Company Name

IDC Fluid Control Co., Ltd.

Address

Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang

Country

China

General Email

View All Listings by this Company

Range of pillar taps incorporating either stainless steel or brass bodies (various finishes), quarter turn ceramic disc headworks with a single lever operating member. The spout outlet incorporates a plastic aerator. The RB3 models are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2111007

Size:

Stainless steel braided PEX lined flexible hose assembly incorporating a 10mm spigot end connection.

Marking:

Vola on operating member

Installation Requirements:

R001 R006 R009

Expiry date:

30/11/2026

Model:

VOLA RB1-XX Stainless steel. VOLA RB3-XX Stainless steel. Where XX denotes the surface finish: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold, 71 = Brushed Dark Copper. VOLA RB1-XX Brass. VOLA RB3-XX Brass. Where XX denotes the surface finish: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

PEX lined flexible hose assemblies with either nylon or stainless-steel braiding and a variety of end connectors. Some models are supplied with screwdriver operated isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2204701

Size:

See model

Marking:

HRN’, ‘WRAS’ and manufacturing date (YY/MM) on ferrule.

Installation Requirements:

R001 R008

Expiry date:

30/04/2027

Model:

Bore diameter: DN8, DN10 or DN13 End connections: ½” BSP F, 3/8” BSP F, ¾” BSP F, ½” BSP M, 3/8” BSP M & ¾” BSP M. M8, M10, M12 & M15. 10mm compression, 12mm compression, 15mm compression & 22mm compression. 15mm compression isolation valve & 22mm compression isolation valve. 3-WAY connector x 9mm Quick connector 9mm M-Quick plastic connector, 9mm M-quick Brass connector 135-A-B-C-D-E-F. The letters denote the following (for DN8): A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective. E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective F denotes DN size and is replaced by: 0 = DN8. The letters denote the following (for DN10) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN10 The letters denote the following (for DN13) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 03 = ¾” F, 17 = ½” M, 19 = 3/4” M, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 48 = M16, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN13

Approval Holder:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

Manufacturer:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

Range of stainless steel and brass double interlocked PEX lined flexible hose assemblies (various finishes - see model) incorporating EPDM washers. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2201029

Size:

See model

Marking:

IL Flessibile company logo (ilF in a circle), WRAS and year of manufacture (YY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

FXW2CX.AABBCCCC.DDD Model code key: AA: identifies hose raw material and diameter BB: identifies the type of external finish CCCC: identifies the type of fittings DDD: identifies the length (between 50 and 200cm) DN 14 various brass end connectors: ½" BSP knurled nuts - female, ½" BSP hexagonal nuts - female, ½” BSP smooth nuts - female, ½" BSP conical nuts - female, ½" BSP anti-twist conical nuts - female, ¾” BSP knurled round nut - female, ⅜” BSP nuts - female, ⅜" BSP cylindrical connector - female, ½" BSP demountable connector - female, ⅜” BSP (M), M15 x1, M12 x1. DN 15 various brass end connectors: ½" BSP knurled nuts - female, ½" BSP hexagonal nuts - female, ½” BSP smooth nuts - female, ½” BSP conical nuts - female, ½” BSP anti-twist conical nuts - female, ⅜” BSP (M). DN 17 brass end connectors: ½” BSP (F) x ½” BSP (F). Surface finishes: Raw, Chromed, Electropolished, Polished, Gold, Bronze, Copper, Nickel, ACR, White, Black, Red, Grey, Silver, Old brass, Beige, Green, Yellow, Orange, Champagne, Fumé, Black metal, Gun metal.

Product Images

Approval Holder:

IL FLESSIBILE di Nicastri e C srl

Company Name

IL FLESSIBILE di Nicastri e C srl

Address

VIA FELICE VEDANI 16 INVORIO

Postcode

28045

Country

Italy

Phone

+39 335 5948283

General Email

g.buratti@ilflessibile.it

View All Listings by this Company

Manufacturer:

IL FLESSIBILE di Nicastri e C srl

Company Name

IL FLESSIBILE di Nicastri e C srl

Address

VIA FELICE VEDANI 16 INVORIO

Postcode

28045

Country

Italy

Phone

+39 335 5948283

General Email

g.buratti@ilflessibile.it

View All Listings by this Company

Range of PET (Polyethylene terephthalate) braided flexible hoses incorporating PEX liner and EPDM ‘O’-rings. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2201334

Size:

See Model

Marking:

TUCAI, NT, WRAS and date of manufacture (YY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

PULLOUT PEX BL DN6: hose bore DN6 PULLOUT PEX BL: hose bore DN8 End connections for both DN6 & DN8: H1/2 conical, H1/2 ET, H1/2 UJ, H3/8 UJ, H3/8 Captive nut, H1/2 Captive nut, H11x1 Captive nut, M15X1, M8X1, M10X1, M12X1, M14X1, M15X1 with ‘O’-ring, LISO 10, LISO 8, CLIP 10, CLIP 11, CLIP 15, G3/8 BSP, M16x1, M16x1 with ‘O’-ring, M18x1.5, M18x1.5 with ‘O’-ring, M22x1, CLIP 14, 1/2-18UNS, 11/16-16 UNS Models and sizes added December 2024; PULLOUT PEX BL DN6: stainless steel braiding PULLOUT PEX BL ACB DN6: polymeric PA braiding PULLOUT PEX BL: DN 8 stainless steel braiding PULLOUT PEX BL ACB: DN8, polymeric PA braiding Available fittings: M10X1 M11X1 M12X1 M12X1.5 M15X1 1/2-18UNS 11/16-16UN 1/2-14NPSM G3/8 G1/2 CLIP 10 CLIP 14

Product Images

Approval Holder:

Tucai SA

Company Name

Tucai SA

Address

Llobateras 10-12, Poligomo Industrial Santiga, 08210 Barbera Del Valles (Barcelona)

Country

Spain

Phone

+34 93 718 9562

View All Listings by this Company

Manufacturer:

Ningbo Tucai Flexible Pipe Co., Ltd.

Company Name

Ningbo Tucai Flexible Pipe Co., Ltd.

Address

No. 1 Beixing Road, Mazhu Town Yuyao, Zheijiang, 31450

Country

China

View All Listings by this Company